Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

What vintage crown is this?


Champagnesky

Recommended Posts

It looks like the brass threads extend to the base on the inside. Is that so, or is there a smooth area below the threads, that would seal against an o-ring? That tells you if it's a 702 vs a 703. You'll need the corresponding tube.

 

Also looks like you'll have trouble getting it to screw onto a stem.

 

  • Like 1
Link to comment
Share on other sites

Maybe a 703? I have installed several vintage 703 crowns on my MBWs, JKFs and Vietnam cases and have had to put 7030 tubes in for them. The 702 crowns require a 7020 where the threads are closer to the case and the tube has a taller [censored] above the threads. So threads up in the crown 703. Threads close to the edge of the crown 702. Both tubes are available from clark for a inexpensive price on the bay.

Sent from my SM-G920P using Tapatalk

  • Like 1
Link to comment
Share on other sites

10 hours ago, Nanuq said:

It looks like the brass threads extend to the base on the inside. Is that so, or is there a smooth area below the threads, that would seal against an o-ring? That tells you if it's a 702 vs a 703. You'll need the corresponding tube.

 

Also looks like you'll have trouble getting it to screw onto a stem.

 

 

10 hours ago, hugop said:

Maybe a 703? I have installed several vintage 703 crowns on my MBWs, JKFs and Vietnam cases and have had to put 7030 tubes in for them. The 702 crowns require a 7020 where the threads are closer to the case and the tube has a taller [censored] above the threads. So threads up in the crown 703. Threads close to the edge of the crown 702. Both tubes are available from clark for a inexpensive price on the bay.

Sent from my SM-G920P using Tapatalk
 

 thx mates, i assume its a 703 crown. I think the it has a lot of dirt inside so i will give it a go in a ultrasonic cleaner. I have a teflon grease i can also use.

Link to comment
Share on other sites

Not sure what was censored above. I thought I had typed [censored] but maybe something autocorrected to something else. In any case my apologies if I posted something inappropriate.

 

Sent from my SM-G920P using Tapatalk

 

 

Weird, it did it again. Why is a word that starts with fl and ends with ange censored? Anyway, here is a pic of a 702 tube for the op. A pic is worth a 1000 censored words. Haha

 

5e3c2ad3d7429c938f3b1eaf909a8ea0.jpg

 

 

 

 

 

 

99% sure you have a 702 crown there.

I defer to the expert on gen rolex bits dbane would certainly know.
Link to comment
Share on other sites

Here are some photos that show the difference.  The big difference  between a 702 and 703 is the added o-ring around the outside base of the 703 tube.  So the inside of the 703 crown has to be smooth there to seal against the o-ring.  The 702 has no o-ring in that position so the inside of the 702 crown is threaded to the base. 

 

Here's a cutaway view of a 702, you can see the threads at the base of the tube, and matching threads inside the crown.

 

701_cross_section.jpg

 

 

Here's a 702 set, with the threads visible

 

702_setb.jpg

 

 

Here's a comparison photo side by side, 702 and 703

 

702_703.jpg

 

 

Here's the smooth inner walls of the 703 where it seals on the o-ring

 

703.jpg

 

  • Like 1
Link to comment
Share on other sites

Here are some photos that show the difference.  The big difference  between a 702 and 703 is the added o-ring around the outside base of the 703 tube.  So the inside of the 703 crown has to be smooth there to seal against the o-ring.  The 702 has no o-ring in that position so the inside of the 702 crown is threaded to the base. 
 
Here's a cutaway view of a 702, you can see the threads at the base of the tube, and matching threads inside the crown.
 
701_cross_section.thumb.jpg.ab701853ef37ddacc3b87ba5bcf0c64e.jpg
 
 
Here's a 702 set, with the threads visible
 
702_setb.jpg.952761eee8a16a3729e54cd4fdbfd4f9.jpg
 
 
Here's a comparison photo side by side, 702 and 703
 
702_703.jpg.12a8783fe7b72905f021255de217f8cc.jpg
 
 
Here's the smooth inner walls of the 703 where it seals on the o-ring
 
703.jpg.dac41e832c2af2e4a758f200429a908d.jpg
 

Perfect Nanuq!


Sent from my SM-G920P using Tapatalk

Link to comment
Share on other sites

Here are some photos that show the difference.  The big difference  between a 702 and 703 is the added o-ring around the outside base of the 703 tube.  So the inside of the 703 crown has to be smooth there to seal against the o-ring.  The 702 has no o-ring in that position so the inside of the 702 crown is threaded to the base. 
 
Here's a cutaway view of a 702, you can see the threads at the base of the tube, and matching threads inside the crown.
 
701_cross_section.thumb.jpg.ab701853ef37ddacc3b87ba5bcf0c64e.jpg
 
 
Here's a 702 set, with the threads visible
 
702_setb.jpg.952761eee8a16a3729e54cd4fdbfd4f9.jpg
 
 
Here's a comparison photo side by side, 702 and 703
 
702_703.jpg.12a8783fe7b72905f021255de217f8cc.jpg
 
 
Here's the smooth inner walls of the 703 where it seals on the o-ring
 
703.jpg.dac41e832c2af2e4a758f200429a908d.jpg
 

Thx Nanuq its a 703 i have then. IT fitted on a tc tube I had, but it has a lot of dirt inside so I will need to clean it. Will add some teflon grease inside too.


Skickat från min iPhone med Tapatalk
Link to comment
Share on other sites

I haven't really a clue, will have to go over some old emails as I had a few fitted and everything got mixed uo,as you look at them head on the one with the tube which is the left one in last photo is exactly the same as a 703 vintage I just got from sub007,

Link to comment
Share on other sites

Yes it looks like a 703. The one on the middle looks rep to me. The side profile and thickness on the right looks more gen or possibly TC.
 
Sent from my SM-G920P using Tapatalk
 
 
Here is a gen 704 to compare...
05cf8aa0f9a59f038cd19f800c6a8e72.jpgbc84f4c1b962b1f2c2ae1d8aa51343be.jpg
 
 

+1

left 703 and right 704 are Gen. middle one is a rep


Verzonden vanaf mijn iPhone met Tapatalk
Link to comment
Share on other sites

Ronin, see the gen 703 on the left?  Look closely and you can see thin stainless steel wrapped over a brass core.  It's visible on the edge that would be closest to the case, where the tiny folds overlap.

 

Only gen crowns are made like this, 700 - 702 - 703.  The 704 is "monobloc" so it's carved from one piece of steel, hence no need for steel wrap over a brass core.  It also has much thinner walls than a 703.

 

MBW "703" crowns have nice thick walls, just like the middle one in your photo.  Hint: They're great raw material for using a dremel and file to put a bevel on the case side and mimic a 702.

 

So IMO you have, left to right, gen 703, MBW 703 and gen 704.

 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up