themannier Posted September 22, 2017 Report Share Posted September 22, 2017 Look at that bezel numbers my friends, it looks like the black paint has gone or is 20 years old. ..damn how Toro makes the control when he gets the watch in his hands ! I wasn't able to see that on his pictures Of course i contacted Toro today and he asked me to send back the watch lol !!! What a disappointment... Here is the brand new watch. Hard to see the problem on this picture Link to comment Share on other sites More sharing options...
themannier Posted September 22, 2017 Author Report Share Posted September 22, 2017 The 6 is fine here Link to comment Share on other sites More sharing options...
themannier Posted September 22, 2017 Author Report Share Posted September 22, 2017 Well, Toro didn't see that during the control but we will say that "errare humanum est" Conclusion....Double check that bezel paint on you QC pics when you order this awesome watch; believe me it's a true beauty !!! Link to comment Share on other sites More sharing options...
kernow Posted September 22, 2017 Report Share Posted September 22, 2017 Hmmmmmm not the best, but I'm sure Toro will sort it out for you. I've always had good service from him. Alternatively, could you not repaint the bezel yourself (or a modder here), maybe Toro would then give you a discount off your next purchase for the hassle you've had? Link to comment Share on other sites More sharing options...
themannier Posted September 22, 2017 Author Report Share Posted September 22, 2017 Well, the bezel engraving is not deep enough and it might be hard to paint it and to remove the excess of paint ; i think i am not able to fix that....But i am sure that someone will have the skill and the time to do this job. So i just ordered another ARF Daytona from Toro and he was kind enough to give me a discount on this one. Regarding this current watch, as i am not able to let her go now until i have the next one, i keep her and i will put her for sale in 3 weeks for a good price with this bezel paint issue..... Link to comment Share on other sites More sharing options...
freddy333 Posted September 22, 2017 Report Share Posted September 22, 2017 It is alot easier to repaint the bezel than to deal with the hassles & potential customs issues of shipping the watch back. This is how I paint engravings on steel with metal paint in a bottle (do not use spray unless the bezel is removed from the watch) - Get some mineral spirits (paint thinner - NOT paint 'stripper') & lint-free rags or paper towels (Viva paper towels usually work well) - Use a Q-tip or small artist's paint brush to apply paint over each of the numbers. Do this fairly quickly so the paint does not begin to dry. - Moisten (do not saturate) the paper towel with mineral spirits & gently brush (do not rub or press!) over the numbers & surrounding area 1 time only. Throw the paper towel away! - Moisten a NEW paper towel with mineral spirits & gently brush a 2nd pass over the area. Throw the paper towel away! - Repeat with a NEW paper towel until the area around the engraving is clean & there is paint only inside the engraving. - Let dry according to paint instructions. Link to comment Share on other sites More sharing options...
themannier Posted September 23, 2017 Author Report Share Posted September 23, 2017 11 hours ago, freddy333 said: It is alot easier to repaint the bezel than to deal with the hassles & potential customs issues of shipping the watch back. This is how I paint engravings on steel with metal paint in a bottle (do not use spray unless the bezel is removed from the watch) - Get some mineral spirits (paint thinner - NOT paint 'stripper') & lint-free rags or paper towels (Viva paper towels usually work well) - Use a Q-tip or small artist's paint brush to apply paint over each of the numbers. Do this fairly quickly so the paint does not begin to dry. - Moisten (do not saturate) the paper towel with mineral spirits & gently brush (do not rub or press!) over the numbers & surrounding area 1 time only. Throw the paper towel away! - Moisten a NEW paper towel with mineral spirits & gently brush a 2nd pass over the area. Throw the paper towel away! - Repeat with a NEW paper towel until the area around the engraving is clean & there is paint only inside the engraving. - Let dry according to paint instructions. Many thanks for this great explanation bro but i am sure i will do some bad things if i try this, so i will let the future buyer play as the watch will be for sale soon Link to comment Share on other sites More sharing options...
themannier Posted September 23, 2017 Author Report Share Posted September 23, 2017 Hum, except this paint issue, i have never seen a rep like that...there is a high building and finishing quality and the gen feeling is great too ! Might be hard to go back to the standard Noob factory watches after that Link to comment Share on other sites More sharing options...
freddy333 Posted September 23, 2017 Report Share Posted September 23, 2017 6 hours ago, themannier said: Many thanks for this great explanation bro but i am sure i will do some bad things if i try this, so i will let the future buyer play as the watch will be for sale soon This bezel looked worse than yours upon arrival. As long as you do not use 'quick-dry' paint (ie, use any standard paint for metal - you can even spray Krylon automotive paint into a small cup & apply from that) & follow the steps, it is pretty difficult not to end up looking like this - Link to comment Share on other sites More sharing options...
themannier Posted September 24, 2017 Author Report Share Posted September 24, 2017 On 23/09/2017 at 4:25 PM, freddy333 said: This bezel looked worse than yours upon arrival. As long as you do not use 'quick-dry' paint (ie, use any standard paint for metal - you can even spray Krylon automotive paint into a small cup & apply from that) & follow the steps, it is pretty difficult not to end up looking like this - Well i will give it a try ! So you said i need a special paint for steel ? How long it takes for this kind of paint to dry ? Link to comment Share on other sites More sharing options...
indywatchguy Posted September 28, 2017 Report Share Posted September 28, 2017 Nice piece! Toro is pretty stand up guy. I've ordered several pieces from him and he always makes good on any issues. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Nanuq Posted September 28, 2017 Report Share Posted September 28, 2017 Doxa dive watches are notorious for losing the paint in their bezel numerals. So I got really good at doing them. Get some Testors black hobby paint in the little bitty glass bottle. Wipe the bezel with rubbing alcohol to get it squeaky clean. When it's thoroughly dry, paint all the numbers. I used a small tip $.79 brush from the hobby shop. Be sloppy, it's okay.Let it dry *completely* like overnight.Next day get a wooden toothpick with a squared off end, or even a wooden chopstick from the grocery store deli, and rub the extra paint off the bezel from around the numbers. It comes right off.Easy squeasy, do it with your eyes closed. I did the orange and the black on this one. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now