obelisque Posted April 10, 2007 Report Share Posted April 10, 2007 Bracelet is too wide. How do you adjust it? Link to comment Share on other sites More sharing options...
vmena Posted April 10, 2007 Report Share Posted April 10, 2007 6 inches is a very small wrist. Mine is 6.4 and I though it was very small. Unless you can not unscrew some screws, you should be able to size it... I have same type of bracelet and I only have two screws still on. I had to remove another 3 or 4. Link to comment Share on other sites More sharing options...
obelisque Posted April 10, 2007 Author Report Share Posted April 10, 2007 Link to comment Share on other sites More sharing options...
HauteHippie Posted April 10, 2007 Report Share Posted April 10, 2007 Thanks for your answer and as I suspected. Will put it up for sale.... Will have to check carefully before getting another watch - guess I just have been lucky so far with the models I have choosen. Try moving the pin in the clasp to the tightest setting also. And never buy a Panerai. Link to comment Share on other sites More sharing options...
ubiquitous Posted April 10, 2007 Report Share Posted April 10, 2007 Agree with Chief- Try adjusting at the clasp... Usually, with a standard non-diver's extension clasp, you can get a good 18mm - 20mm adjustment... Link to comment Share on other sites More sharing options...
obelisque Posted April 10, 2007 Author Report Share Posted April 10, 2007 Link to comment Share on other sites More sharing options...
jfreeman420 Posted April 10, 2007 Report Share Posted April 10, 2007 Yep that is one long bracelet. You have one more link to take out, but you have to be really careful if it is too tight. They are easy to strip. Do the screws go through to the opposite side of the clasp? Are there any more to take out of the other half of the bracelet? Link to comment Share on other sites More sharing options...
obelisque Posted April 10, 2007 Author Report Share Posted April 10, 2007 ... Link to comment Share on other sites More sharing options...
ken Posted April 10, 2007 Report Share Posted April 10, 2007 i have a 6 inch wrist also, but my old dj rep fit me. i had 2 extra links on it, and set to the 4th hole from the outside. it was pretty tight too. Link to comment Share on other sites More sharing options...
obelisque Posted April 10, 2007 Author Report Share Posted April 10, 2007 Link to comment Share on other sites More sharing options...
obelisque Posted April 10, 2007 Author Report Share Posted April 10, 2007 Link to comment Share on other sites More sharing options...
ken Posted April 10, 2007 Report Share Posted April 10, 2007 wow that is really weird. mine is 6 inches exactly yet my rep datejust fits perfect. i have 2 extra links on mine and it's set on the 4th hole. weird. Link to comment Share on other sites More sharing options...
Zed Posted April 10, 2007 Report Share Posted April 10, 2007 If you can see the screw on the other side use a pin pusher to push it out .. Some get cross threaded and stripped in there and won't budge so just push it out if you can or use a hammer and block to hammer it out ... Zed Link to comment Share on other sites More sharing options...
alligoat Posted April 10, 2007 Report Share Posted April 10, 2007 Have you considered a leather strap? I have one of my Frankenjusts on a dark brown leather strap and actually prefer it to the metal band. And leather straps come in regular, small and long. And at $15-20, they're reasonably priced and very comfortable. BTW, I like Zed's idea with the pin pusher tool- if you can keep pressure on the end of the screw, and turn w/ a screwdriver from the other end, you might be able to back it out. Link to comment Share on other sites More sharing options...
eunomians Posted April 10, 2007 Report Share Posted April 10, 2007 Nice watch. Try a leather strap. Perhaps an Alligator. It would look unique and very elegant. Link to comment Share on other sites More sharing options...
obelisque Posted April 11, 2007 Author Report Share Posted April 11, 2007 Link to comment Share on other sites More sharing options...
obelisque Posted April 11, 2007 Author Report Share Posted April 11, 2007 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now