Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

MBW Patek Philippe Jumbo Nautilus


eunomians

Recommended Posts

MBW Patek Philippe Nautilus pictoral review

I had been yearning and aching for a Patek Nautilus for many years.

Every now and then, I would see one on display.

Usually it was the first generation Nautilus from the mid-1970s that I would see (without the seconds hand).

There was always something strange & mysterious about the look of the watch. I could never quite figure out what it was that made the watch so, well, oddly imbedded in my mind.

I found the larger case size quite alluring, relative to most watches from times past, the Nautilus was a very large watch. Despite its large size, the Nautilus is very thin, consequently making it very elegant and dressy (and yes, it can be worn under a cuff). The weird bezel with a gasket in between that screws into the mid-case was unique, so was the 1 of a kind sculptured bezel. The integrated bracelet with the shiny and brushed surfaces was more of an extension of the watchcase as opposed to a 'bracelet'.

And it was very haute-couture as far as styling goes in the 1970s.

Gerald Genta was really on to something with this design.

The watch looks somehow contemporary in the 2000s but it retains some sort of classic modern aesthetic(s) that make it look overall timeless.

Ahhh, this is not surprising since it is a Patek!

The overall fit & finish of this MBW is remarkable. Once again, it is up to par with MBW standards. The size, weight, execution of satin and shiny finishes are extraordinary. For the record, this is the Jumbo Nautilus, it is a large over 40mm in diameter (minus the crown) watch.

This Nautilus is a nice match with my other MBW Patek Aquanaut.

Once again, I would like to thank Paso for his excellent communication and very fast delivery. Big thumbs up to Paso and for this fine fine watch! Highly recommended!

On to the pics:

251256-7475.jpg

251256-7476.jpg

251256-7477.jpg

251256-7478.jpg

251256-7479.jpg

251256-7480.jpg

251256-7481.jpg

251256-7482.jpg

251256-7483.jpg

251256-7484.jpg

251256-7485.jpg

What a nice watch!

251256-7486.jpg

Link to comment
Share on other sites

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

@RT...

:g: Hmmmmmm... Please, please... Do tell :lol:

I do have an MBK Nauti en route... But who's to say I don't want... More?

^_^

Sorry,.. I think I have said too much already,.. -_- just trying to save some members money..

however it would be a quite a wait so maybe it's best to let go if you have the funds to do so..

Seeking a cream face model myself, if I can get it in stainless with gold hands & markers on brown croc...

don't know or really care about the accuracy of such a model,..Just would love to own one..

Link to comment
Share on other sites

It's a lovely watch. I received my first compliment yesterday whilst in line at the supermarket.

It would be nice to have a strap option as well.

I hope that there will be a +40mm Aquanaut one day, as well.

Cheers

Link to comment
Share on other sites

It's a lovely watch. I received my first compliment yesterday whilst in line at the supermarket.

It would be nice to have a strap option as well.

I hope that there will be a +40mm Aquanaut one day, as well.

Cheers

Hey Eunomians,.. what is the size of your's..?
Link to comment
Share on other sites

Mine is 42mm in diameter :D The Nautilus is big!

My other Patek, the Jumbo Aquanaut, is approx. 38mm (like OEM) but wears like a 40mm watch due to the bezel. It looks to be the same diameter as my genuine Rolex 1675. The latest genuine Aquanaut Jumbo Version2 is slightly over 40mm I believe. But sadly the Aquanaut has been discontinued.

Link to comment
Share on other sites

Mine is 42mm in diameter :D The Nautilus is big!

My other Patek, the Jumbo Aquanaut, is approx. 38mm (like OEM) but wears like a 40mm watch due to the bezel. It looks to be the same diameter as my genuine Rolex 1675. The latest genuine Aquanaut Jumbo Version2 is slightly over 40mm I believe. But sadly the Aquanaut has been discontinued.

Thanks Euno,.. 42mm is the new 40mm, and for me.. Perfect ! Large enough to be in style and small

enough to be professional...

What is the thickness ?

If one owned a VC Overseas, a Nautilus Jumbo, a Royal Oak Jumbo,.... they would have three of a kind

from the top three watchmakers in the world....

Though with my wrist size, the Royal Oak would have to be on leather, as the metal deployant

is too long, which creates this corner along the bottom left edge of the band..

Link to comment
Share on other sites

Searching through the web to find cream dial Nautiluses

in stainless,.. but it seems there are only two toned models..

or the full gold...

Did find a Couple of interesting Nautilus pages though..

http://kronosclub.blogspot.com/2006_10_01_archive.html

and http://www.patek.com/html/en/press/press_nautilus_2006.html

Did you know there was a 43mm Version,.. and that the dial color is supposed to

graduate in color ?

post-243-1179954456_thumb.jpg

post-243-1179954602_thumb.jpg

Link to comment
Share on other sites

There was always something strange & mysterious about the look of the watch. I could never quite figure out what it was that made the watch so, well, oddly imbedded in my mind.

agree with you on the statement..it's same with me..

Link to comment
Share on other sites

Though with my wrist size, the Royal Oak would have to be on leather, as the metal deployant

is too long, which creates this corner along the bottom left edge of the band..

K- I managed to figure out a way to prevent this with my MBK Royal Oak Jumbo- I had the problem of either the clasp projecting out and creating a sharp bend on the 12:00 side of the bracelet, or some binding on the 6:00 side. So, what I did was contour the clasp at the hinge and remove one permanent link on the 6:00 side (with one removable link added on the 12:00 side). The result is perfect fit on my 6.75" wrist, and the clasp sits nice and flat along the bottom of my wrist.

251970-7309.jpg

251970-7310.jpg

Maybe this would work for you as well...

what does the back look like on the Jumbo Nautilus? Solid or Display?

On the new 5711 and the rest of the new (genuine) line up, the watches are equipped with display backs. Older Jumbos along with the MBW/MBK rep have a solid back. As a matter of fact, the back on the rep is integral with the case; i.e. when you want to open up the watch, you have to do it from the bezel by removing the 4 screws projecting into the case hinges (or as some might call them, ears) and lift the entire bezel/crystal assembly off the case. This is just like gen... Monocoque case...

Link to comment
Share on other sites

K- I managed to figure out a way to prevent this with my MBK Royal Oak Jumbo- I had the problem of either the clasp projecting out and creating a sharp bend on the 12:00 side of the bracelet, or some binding on the 6:00 side. So, what I did was contour the clasp at the hinge and remove one permanent link on the 6:00 side (with one removable link added on the 12:00 side). The result is perfect fit on my 6.75" wrist, and the clasp sits nice and flat along the bottom of my wrist.

251975-7307.jpg

251975-7308.jpg

Maybe this would work for you as well...

Hey,.. Thanks Ubi,.. Now I can order another and wear it ! I should have known that you would

find the answer ! :thumbsupsmileyanim:

Link to comment
Share on other sites

What is the thickness ?

It is very thin at slightly over 8mm, just like OEM.

The Nauty is the thinnest watch I own.

This thin profile makes the watch very elegant.

If one owned a VC Overseas, a Nautilus Jumbo, a Royal Oak Jumbo,.... they would have three of a kind

from the top three watchmakers in the world....

I am looking to complete this same perfect Trifecta (or Horological Canon-Triumvirate, if u will).

I own a 42m Nautilus.

I have a VC Overseas on its way.

And I'm looking for a Royal Oak Jumbo.

Link to comment
Share on other sites

It is very thin at slightly over 8mm, just like OEM.

The Nauty is the thinnest watch I own.

This thin profile makes the watch very elegant.

I am looking to complete this same perfect Trifecta (or Horoligical Canon-Triumvirate, if u will).

I own a 42m Nautilus.

I have a VC Overseas on its way.

And I'm looking for a Royal Oak Jumbo.

Fanatastic,.. nothing better than a 42mm automatic watch that's also very thin.

This Overseas is my thinnest yet at 9.7mm which is the actual gen size as well, though

you will read some web pages listing it incorrectly at 12mm.

After going through the Pam craze, I have found these thinner variety, to be my personal sized best..

and I marvel at the ergonomic thin profile of this Overseas ..

The 42mm gives them presence, while the profile gives them class..

Can't wait to get my hands on a Nautilus,.. and now also searching for a Jumbo Royal Oak..

Thanks !

Link to comment
Share on other sites

Thanks Euno,.. 42mm is the new 40mm, and for me.. Perfect ! Large enough to be in style and small

enough to be professional...

What is the thickness ?

If one owned a VC Overseas, a Nautilus Jumbo, a Royal Oak Jumbo,.... they would have three of a kind

from the top three watchmakers in the world....

Though with my wrist size, the Royal Oak would have to be on leather, as the metal deployant

is too long, which creates this corner along the bottom left edge of the band..

I am not a newbie here but i have not gotten a clue where to get those bdet VC Overseas, a Nautilus Jumbo, a Royal Oak Jumbo that you guy talking about. Would you mind pm me some info as how to get them. I would like very much to have those too to complete my collection.

Here is what i have right now :

http://www.rwg.cc/members/My-Collection-t28101.html

and i would stop if i can source those.

thanks

Link to comment
Share on other sites

I am looking to complete this same perfect Trifecta (or Horological Canon-Triumvirate, if u will).

I own a 42m Nautilus.

I have a VC Overseas on its way.

And I'm looking for a Royal Oak Jumbo.

Can't wait to get my hands on a Nautilus,.. and now also searching for a Jumbo Royal Oak..

Heh... I've got the Royal Oak Jumbo... Nauti Jumbo on the way... Looks like I'll have to get the new Overseas to keep up with you guys!

Link to comment
Share on other sites

Heh... I've got the Royal Oak Jumbo... Nauti Jumbo on the way... Looks like I'll have to get the new Overseas to keep up with you guys!

Congrats on your fine watch-deal ;)

Looks like you got one of the newer models with SS-Back?

Could you post a shot of the back... just want to compare the serials etc. ...

No Face-Shot either??

Best Regards and welcome back to the "Oak-Club" :thumbsupsmileyanim:

...lol i see you did the same "bracelet-mod" like i posted on my ROs

George

Link to comment
Share on other sites

Congrats on your fine watch-deal ;)

Looks like you got one of the newer models with SS-Back?

Could you post a shot of the back... just want to compare the serials etc. ...

No Face-Shot either??

Best Regards and welcome back to the "Oak-Club" :thumbsupsmileyanim:

...lol i see you did the same "bracelet-mod" like i posted on my ROs

George

Hi George...

Not wanting to hijack Euno's thread, I had better start one of my own on this one... :)

Link to comment
Share on other sites

Hi George...

Not wanting to hijack Euno's thread, I had better start one of my own on this one... :)

Thats ok...

Im not wondering that much hearing this names of 3 very fine timepieces

and by design "3 pieces of art" in one thread.

Doesnt wanna hijack either... the look of the nautilus somehow amazes me too :)

Both children of Mr. Genta and the Overseas is classy as well.

I still have the 38mm Version of the Overseas... waitin till they produce

a rep of the "jumbo" version which is also 40mm in case diameter.

Regarding my other posts... i have to say that sometimes i have

a very special humour... but i dont wanna offend anyway ;)

I remeber the thread concerning the "wrist-size"...

Anyway... wear it well!

George

Link to comment
Share on other sites

Thats ok...

Im not wondering that much hearing this names of 3 very fine timepieces

and by design "3 pieces of art" in one thread.

Doesnt wanna hijack either... the look of the nautilus somehow amazes me too :)

Both children of Mr. Genta and the Overseas is classy as well.

I still have the 38mm Version of the Overseas... waitin till they produce

a rep of the "jumbo" version which is also 40mm in case diameter.

Regarding my other posts... i have to say that sometimes i have

a very special humour... but i dont wanna offend anyway ;)

I remeber the thread concerning the "wrist-size"...

Anyway... wear it well!

George

You are right,.. Gerald Genta designed the Royal Oak, and the Nautilus.

He also designed the Iwc Ingenuier.

Regarding your Overseas however... the 42mm version is already out.. -_-

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...
Please Sign In or Sign Up