rolli Posted July 26, 2007 Report Share Posted July 26, 2007 hi all, some time ago i did a vacuum machine water test with my first steelfish and the result was negative. result: i've got a new second steelfish. today i did the water test with the machine Witchi ALC 2000. 1.) 0,8 bar vacuum test -- result: waterproof 2.) 10 bar pressure test -- result: waterproof below you see a picture with this result. note: this special breitling case can be only tested with a minimum vacuum pressure test of 0,8 bar. good result, now i know that i can throw the steelfish into the sea with a red ribbon aound it. LOL. rolli test report: Witchi ALC 2000: Link to comment Share on other sites More sharing options...
gridlock1983 Posted July 26, 2007 Report Share Posted July 26, 2007 Who did you get your Steelfish from out of interest? I was wondering if mine was waterproof Link to comment Share on other sites More sharing options...
rolli Posted July 26, 2007 Author Report Share Posted July 26, 2007 hi, PT got this new steelfish for me direct from the steelfish maker. rolli Who did you get your Steelfish from out of interest? I was wondering if mine was waterproof Link to comment Share on other sites More sharing options...
rolli Posted July 26, 2007 Author Report Share Posted July 26, 2007 unfortunately no. i had to go to a local jeweler which has the witchi alc 2000. only 3 jewelers here in my city have this model and from greiner the poseidon. rolli Is that your ALC2000? Link to comment Share on other sites More sharing options...
FxrAndy Posted July 26, 2007 Report Share Posted July 26, 2007 Hey Rolli, where are you in Germany, PM me I am in NRW Link to comment Share on other sites More sharing options...
Estaban Posted July 26, 2007 Report Share Posted July 26, 2007 I have swam extensively with my asian SFSO over the past two weeks. Tight as a drum. Not bad for under $150 Link to comment Share on other sites More sharing options...
rolli Posted July 31, 2007 Author Report Share Posted July 31, 2007 the product manager of the fabricator witchi eletronics told me today, when a watch passes the test with 10 bar pressure positive, then the 20 bar pressure test will be positive also. therefore operate the commercial devices with 10 bar. I think that was helpful. rolli Link to comment Share on other sites More sharing options...
Pugwash Posted July 31, 2007 Report Share Posted July 31, 2007 I assume my Steelfish (From Precious Time, never opened) is waterproof. I wear it as if it is. Link to comment Share on other sites More sharing options...
lazarini Posted July 31, 2007 Report Share Posted July 31, 2007 Mine has been fixed now as i mentioned a gear got loose due to screew almoust completely un-screewed ... i have return it to watchmaker to lube and close it after i test it for accurancy for almost a week ... he will also perform the test at 5 and 10 ATM ... ill let u all know how that went by the end of the week ... fingers crosssed now regards laz Link to comment Share on other sites More sharing options...
watcher Posted July 31, 2007 Report Share Posted July 31, 2007 That is good to hear!! Enjoy wearing her my friend!! looks good on the strap by the way Link to comment Share on other sites More sharing options...
chubbchubb Posted July 31, 2007 Report Share Posted July 31, 2007 Someone sold a Greiner WPC300 on the bay yesterday (250145493116) for 700€. Link to comment Share on other sites More sharing options...
rolli Posted July 31, 2007 Author Report Share Posted July 31, 2007 this is an old device. this device operates only with pressure not with vacuum technology. but vacuum is the most important test. the watch gets an expansion and here you can see whether the gaskets hold the watch really waterproof. a test with pressure is mostly the second test. the new modern device from greiner is the poseidon. rolli Someone sold a Greiner WPC300 on the bay yesterday (250145493116) for 700 Link to comment Share on other sites More sharing options...
chubbchubb Posted August 1, 2007 Report Share Posted August 1, 2007 this is an old device. this device operates only with pressure not with vacuum technology. but vacuum is the most important test. the watch gets an expansion and here you can see whether the gaskets hold the watch really waterproof. a test with pressure is mostly the second test. the new modern device from greiner is the poseidon. rolli ...that's why Link to comment Share on other sites More sharing options...
lazarini Posted August 2, 2007 Report Share Posted August 2, 2007 Mine has been tested today at 5 and 10 atm. Both times positive regards laz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now