cskent69 Posted May 19, 2006 Report Share Posted May 19, 2006 Has anyone noticed that the font on EVERY Panerai rep has a flaw? I have bought 3 of these now. And the dead giveaway is the A. Genuine Panerai's have have the horizontal part of the "A" a tad higher than the rep which is a bit lower. Rep "A"s look fatter. After i found this - i was really upset and sad. Now I have to find Gen dials........ Link to comment Share on other sites More sharing options...
rsv123 Posted May 19, 2006 Report Share Posted May 19, 2006 Yep, I think we are all aware of this one. TBH a tiny flaw like this is probably a good thing, as it prevents the reps being passed of as genuine if you have a knowledgable buyer. The problem does not bother me with the reps as you really have to look quite long and hard to spot it (and have a gen side-by-side for comparison) unless you have the font commited to memory! Link to comment Share on other sites More sharing options...
Watchmeister Posted May 19, 2006 Report Share Posted May 19, 2006 Actually, I have had gens next to reps a number of times and that is not the flaw that screams it out. Even on the gens the exact font and sizing can vary depending on the model, the year and the subcontractor who is doing the screening. Link to comment Share on other sites More sharing options...
Edge Posted May 19, 2006 Report Share Posted May 19, 2006 Are you winding me up??? It's maybe a 1/100 th of a mm and it's sooooo bad you have to get gen dials. You would need a loupe and a good eye, and a lot of knowledge to spot it, whilst comparing to a gen and even then it's open to debate. And you just can't live with it, sorry I hate flaming but this is plainly pathetic...... Link to comment Share on other sites More sharing options...
cskent69 Posted May 19, 2006 Author Report Share Posted May 19, 2006 Are you winding me up??? It's maybe a 1/100 th of a mm and it's sooooo bad you have to get gen dials. You would need a loupe and a good eye, and a lot of knowledge to spot it, whilst comparing to a gen and even then it's open to debate. And you just can't live with it, sorry I hate flaming but this is plainly pathetic...... Dude, it is a point of observation. Lots of folks on this board do EVERYTHING to make their reps as close as possible. Given that this is noticeable to anyone in the KNOW - i was asking what other people think. I personally don't care about nearly 75% of the stuff that others care about - like aging, crystals, backs, etc - but the logo font on the dial is one that matters to me. To each their own. Lighten up. Link to comment Share on other sites More sharing options...
Ethan Posted May 19, 2006 Report Share Posted May 19, 2006 Read Kruzer's comment, member 1,529. Edge's got a perfect right to flame your ass for something so silly. You want perfection, go buy a gen. Link to comment Share on other sites More sharing options...
Polynomial Posted May 19, 2006 Report Share Posted May 19, 2006 good eyes jokes aside; what is bugging me for instance is the 212, the three models (Asian 7750, ETA, and copy Venus) each has different dial fonts, specially numbers 6 and 12, OK, the new ETA (Think Josh has these) is sort of bit better, but still, they are very original with fonts Link to comment Share on other sites More sharing options...
Ethan Posted May 19, 2006 Report Share Posted May 19, 2006 what is bugging me for instance is the 212, the three models (Asian 7750, ETA, and copy Venus) each has different dial fonts, specially numbers 6 and 12, OK, the new ETA (Think Josh has these) is sort of bit better, but still, they are very original with fonts Agree Poly; I've seen two side-by-side 196s that had different fonts... Link to comment Share on other sites More sharing options...
Highflyingclive Posted May 19, 2006 Report Share Posted May 19, 2006 Get out more. Meet girls. Find a life. Seriously. Link to comment Share on other sites More sharing options...
Ethan Posted May 19, 2006 Report Share Posted May 19, 2006 Get out more. Meet girls. Find a life. Seriously. Go Clive! Link to comment Share on other sites More sharing options...
Richard Tracy Posted May 19, 2006 Report Share Posted May 19, 2006 Great thing about Pams, is that they are not well known..so not many frames of reference to worry about.. By the way this font issue is the first I have heard, even on a replica board.. so don't sweat the small stuff....... Link to comment Share on other sites More sharing options...
pubus Posted May 19, 2006 Report Share Posted May 19, 2006 (edited) ok I took my time and peep at it carefully. Dude!! theres no way anybody gonna notice the difference! The font is small itself, and the difference is even less noticable imo :| anyway gens are gens, you cant cheat at them Edited May 19, 2006 by pubus Link to comment Share on other sites More sharing options...
ehtolcad Posted May 19, 2006 Report Share Posted May 19, 2006 yes it is a known issue. i'll still buy panerai though even with this glaring error Link to comment Share on other sites More sharing options...
groobash Posted May 20, 2006 Report Share Posted May 20, 2006 Has anyone noticed that the font on EVERY Panerai rep has a flaw? I have bought 3 of these now. And the dead giveaway is the A. ACK!!! YOU'RE RIGHT! I'm not buying any until they fix this! Link to comment Share on other sites More sharing options...
Chronus Posted May 20, 2006 Report Share Posted May 20, 2006 I know I'm picky, but I'm not THAT picky. Link to comment Share on other sites More sharing options...
trunk21 Posted May 20, 2006 Report Share Posted May 20, 2006 99.999% of the earth's population will never know the difference. .001% of the earth's population are Paneristi and will know the difference. 99% of the earth's population don't know (or care) what a Panerai is. Do zee math... Link to comment Share on other sites More sharing options...
kasigi Posted May 20, 2006 Report Share Posted May 20, 2006 99.999% of the earth's population will never know the difference. .001% of the earth's population are Paneristi and will know the difference. 99% of the earth's population don't know (or care) what a Panerai is. Do zee math... We could say exactly the same about the crowns. But people are desperate to get replacement crowns for their Panerai reps. People have different priorities, each to their own. K. Link to comment Share on other sites More sharing options...
Edge Posted May 20, 2006 Report Share Posted May 20, 2006 We could say exactly the same about the crowns. But people are desperate to get replacement crowns for their Panerai reps. People have different priorities, each to their own. K. At least the crown is noticeable to someone without the use of a reference piece and the Hubble Telescope. Link to comment Share on other sites More sharing options...
Esmarc Posted May 20, 2006 Report Share Posted May 20, 2006 At least the crown is noticeable to someone without the use of a reference piece and the Hubble Telescope. Let the cleaning of the spit on the monitor commence Link to comment Share on other sites More sharing options...
Chronus Posted May 20, 2006 Report Share Posted May 20, 2006 At least the crown is noticeable to someone without the use of a reference piece and the Hubble Telescope. Link to comment Share on other sites More sharing options...
Watchmeister Posted May 20, 2006 Report Share Posted May 20, 2006 Hey Steve- Belated Happy Birthday. Now where were we? Oh yeah the Font. But I am the last one to criticize. I have just sunk to a new low - I just picked up a set of gen 2893 hands in tritium. Putting them on my 2893 and will use the color for reference when reluming the 187 and Subs. Now, if only I could get someone to apply tritium. Hey, no guts, no glory. Link to comment Share on other sites More sharing options...
Edge Posted May 20, 2006 Report Share Posted May 20, 2006 Hey Steve- Belated Happy Birthday. Now where were we? Oh yeah the Font. But I am the last one to criticize. I have just sunk to a new low - I just picked up a set of gen 2893 hands in tritium. Putting them on my 2893 and will use the color for reference when reluming the 187 and Subs. Now, if only I could get someone to apply tritium. Hey, no guts, no glory. Why wont people apply tritium?? And don't say cos it's radioactive.... Tritium (3H) T : maximum effect kC-H /kC-T ~ 16 Half life of 12.28 years, radiation = beta, range in air 4.7 mm, doesn’t present external radiation hazard. .....Cos I am a chemist Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now