bklm1234 Posted October 22, 2007 Report Share Posted October 22, 2007 Can anyone tell me how to pop the SFSO bezel? Do the screws around the bezel hold the it in place, i.e. removing the screws will allow me to take off the bezel? Or I have to use the good old razor blade between the bezel and case? Thanks. -bk Quote Link to comment Share on other sites More sharing options...
cib0rgman Posted November 21, 2007 Report Share Posted November 21, 2007 I need to do the same bump Quote Link to comment Share on other sites More sharing options...
The Red Baron Posted November 21, 2007 Report Share Posted November 21, 2007 I read somewhere the screws are faux, and you'll probably find this by looking closely at them and/or trying to unscrew them, they do seem glazed onto the bezel. As for how to pop it off, your guess is as good as mine. Quote Link to comment Share on other sites More sharing options...
milsub5517 Posted February 12, 2008 Report Share Posted February 12, 2008 any luck removing bezel anyone? Quote Link to comment Share on other sites More sharing options...
mickeypro Posted July 21, 2008 Report Share Posted July 21, 2008 http://www.repgeek.com/showthread.php?t=26...bezel+from+sfso Fleed answered this question, but it appears it cant be done without damaging the spring Quote Link to comment Share on other sites More sharing options...
Sir-Lancelot Posted July 21, 2008 Report Share Posted July 21, 2008 The screws are too short and would not hold anything in place so they do not even need to be touched. Not to say you are incompetent as that is obviously not the case with you BK, but from my experience, You will [censored] it up unless you have one of those expensive bezel removers, I am almost certain of it. I removed mine and did manage to get it back to working order, but I bent the [censored] out of the bezel, luckily I got it straight, but fleed is correct the spring will be damaged and will have to be replaced. The experience was a complete waste of my time and I came really close to FUBAR my fish. That bezel is on there and if i had it to do all over again, I would have just left it alone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.