StormTooper4 Posted October 14, 2008 Report Posted October 14, 2008 I appreciate that this has been done already and there are quite a few around but I thought I'd share my efforts. Ingredients 5218-201a from DSN Crown Guard from V Crown from T New stem given by btwhitesox, big big thanks dude, cut and fitted by moi Yikes. Pre V screws from the bay and from these good shores as well, which is nice. 1.6mm holes drilled to perfection by local jeweller Vintage Leather by Simona Happy as Larry Thanks for looking ST4
PAMman Posted October 14, 2008 Report Posted October 14, 2008 That looks really sweet and so close to a $30,000 watch in both form and function. Wear it in good health.
Cats Posted October 14, 2008 Report Posted October 14, 2008 That's a great piece of art Wear ir well. Carpe Diem Cats
dluddy Posted October 14, 2008 Report Posted October 14, 2008 Beautiful ST4. Good to see the Pre-V screws installed. So it seems like the 1.6MM holes are not a problem with the DSN cases..
ubiquitous Posted October 14, 2008 Report Posted October 14, 2008 VERY nice! The double screw lugs are a very nice touch!
dadog13 Posted October 14, 2008 Report Posted October 14, 2008 nice one...you should upgrade the dial with a nice FGD dial and you would have a winner there... enjoy your new baby!
rmcsherry Posted October 14, 2008 Report Posted October 14, 2008 Glad to see the screws going to good use
bwhitesox Posted October 14, 2008 Report Posted October 14, 2008 I'm gathering the parts to do the exact same watch, If it turns out even half as good as yours then I will be mighty pleased.
JohnCraig Posted October 14, 2008 Report Posted October 14, 2008 Absulutely beautiful. Makes me want to move to the next level. Apparently modding is a addictive as reps (or more so). JW
fishgodeep Posted October 14, 2008 Report Posted October 14, 2008 Fantatsic ...that case looks really good ST$...!!! Cheers FGD
StormTooper4 Posted October 14, 2008 Author Report Posted October 14, 2008 Dudes thank you so much for you kind words I really do appreciate it. I have to say inspiration really does come from you guys, especially Rolli and his watches. But I have to give thanks V and T for them making the parts we need. Given that I have only been in this game for just over a year now, If you had said to me I'd be tinkering like this back then I would of laughed and really didn't think I would ever enjoy putting parts together like this. RMC This is the old case, standard i guess I'm blessed to have found a local guy who will do THE metal work for me, he's drilled this out to perfection as he did with my 003 project which needed to be drilled for a new Tube. The drilling cost $30 maybe a bit expensive but there is no way I could of done that. The screws got here in a few days as they are made here in Aus. Though I have to say these screws are a PITA to fit, I wish I had got a few pairs as I'm sure I will loose them. What we need is River to get some Spring loaded versions now there is a thought. As for the dial, I think I will stick with this one, the lume is great its great when the sunlight charges it up and it glows in the daylight happy days ST4
ihalatch Posted October 15, 2008 Report Posted October 15, 2008 (edited) How big is the stem for DSN with swiss movement 1.2 or 0.9? Cheers Edited October 15, 2008 by ihalatch
rolli Posted October 15, 2008 Report Posted October 15, 2008 but when this case is an old standard case, then the right-side lug holes have 1,8 mm diameter. all handwind pam cases which i have, have a long spindle screw of 1,8mm diameter. that means, when i want to use the prev double-screw-strap-attachment-system, then the screw-heads must be 1,75 - 1,78mm diameter. and when you use the screw-head with 1,6mm, then they don't fit perfectly. they have too much clearance. rolli RMC This is the old case, standard i guess happy days ST4
dadog13 Posted October 15, 2008 Report Posted October 15, 2008 here is what I have found on the AC on 'risti - the guy is selling there the preV screws...don't know if it is from the same source as where you guys buy them : hxxp://www.network54.com/Forum/353393/thread/1224053836/last-1224053836/FS+PRE-V+WATCH+5218-201A%2C+202A+SERIES+TUBES+%26amp%3B+SCREWS replace the xx with tt and it should work for you..
capice Posted October 15, 2008 Report Posted October 15, 2008 Great piece....the master of Pam's spoke....well observed Rollie but when this case is an old standard case, then the right-side lug holes have 1,8 mm diameter. all handwind pam cases which i have, have a long spindle screw of 1,8mm diameter. that means, when i want to use the prev double-screw-strap-attachment-system, then the screw-heads must be 1,75 - 1,78mm diameter. and when you use the screw-head with 1,6mm, then they don't fit perfectly. they have too much clearance. rolli
rmcsherry Posted October 15, 2008 Report Posted October 15, 2008 Great piece....the master of Pam's spoke....well observed Rollie It's a good observation - but as has been said before, it'd be pointless making Pre-V screws with 1.8mm screws, as they wouldn't be true to the original and wouldn't fit the real 5218's. As the 44mm cases that are widely available to the community are completely wrong anyway, the next step should be to look to reproduce a 1:1 case that accepts these 1:1 screws. A lot of effort and investment has gone in to making the Pre-V screws, so I wouldn't like to see them dismissed based on the fact they aren't a perfect fit for an inaccurate case.
StormTooper4 Posted October 15, 2008 Author Report Posted October 15, 2008 It's a good observation - but as has been said before, it'd be pointless making Pre-V screws with 1.8mm screws, as they wouldn't be true to the original and wouldn't fit the real 5218's. As the 44mm cases that are widely available to the community are completely wrong anyway, the next step should be to look to reproduce a 1:1 case that accepts these 1:1 screws. A lot of effort and investment has gone in to making the Pre-V screws, so I wouldn't like to see them dismissed based on the fact they aren't a perfect fit for an inaccurate case. Ok then DSN case must be 1.6mm, in the other pre V post I showed this. The Middle case though better on the lug shape had the bigger holes, where as the DSN is on the bottom has the smaller holes which is the one I ended up getting Drilled on the other side. I tried the screws in the middle case and they were too big, they would of been ok I think but this was the better option. Cheers ST4
rmcsherry Posted October 15, 2008 Report Posted October 15, 2008 The case looks good, and the screws are a perfect fit. What's the top case in that image? The lugs look nice and square - can't see the bezel though!
StormTooper4 Posted October 15, 2008 Author Report Posted October 15, 2008 The case looks good, and the screws are a perfect fit. What's the top case in that image? The lugs look nice and square - can't see the bezel though! That'll be this one
ihalatch Posted October 17, 2008 Report Posted October 17, 2008 Hi Guys, I'm going to buy a few t-crowns but I'm not sure about the size of the stem needed to fit the DSN swiss movement rep. What's the size 0.9 or 1.2mm? Please, help. Cheers
ihalatch Posted October 17, 2008 Report Posted October 17, 2008 Thanks bwhitesox. I'll order some t-48.
StormTooper4 Posted October 17, 2008 Author Report Posted October 17, 2008 Thanks bwhitesox. I'll order some t-48. and don't forget the Stems
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now