dakatana2002 Posted June 14, 2009 Report Share Posted June 14, 2009 After i read this topic i opened all my watches (rep and gen) just to examine the grinding gear...all was perfect less than in one watch...It has the a7750 and this gear has only one missing teeth.Just one!all the others are perfect...So i go to watchmaker and he examined the gear and after closing the watch said to me just to wear it and forget the problem because just 1 teeth is not a problem at all...the only thing he said is to slowly use the manual wind or if possible to avoid it... I'll like to know your opinion.It' better to change the gear (that is perfect...has only 1 teeth missing) or it isn't a problem? Link to comment Share on other sites More sharing options...
RWG Technical Posted June 14, 2009 Report Share Posted June 14, 2009 Well I am not a watchmaker, so I guess he knows best... Link to comment Share on other sites More sharing options...
ubiquitous Posted June 14, 2009 Report Share Posted June 14, 2009 So i go to watchmaker and he examined the gear and after closing the watch said to me just to wear it and forget the problem because just 1 teeth is not a problem at all... I chuckle and shake my head... Link to comment Share on other sites More sharing options...
dakatana2002 Posted June 14, 2009 Author Report Share Posted June 14, 2009 Well I am not a watchmaker, so I guess he knows best... I do not know if watchmaker is the right word...excuse me...the man who fix the watches...he examined the gear for a while...rotate the rotor and tried slowly to manual wind and sayd to me that the teeth is half-missing...only half teeth is missing and if i want this is a 10 minutes work to change it but in his opinion the watch stop to work before the gear loose another teeth if i avoid to use manual wind obviously...(and i avoid it...) now the question is...if you say to change the gear i go tomorrow morning and change it with no doubt... Link to comment Share on other sites More sharing options...
dakatana2002 Posted June 14, 2009 Author Report Share Posted June 14, 2009 I chuckle and shake my head... Chuckle?what means?excuse me but i'm italian Do you suggest to change the gear?or just wait that the a7750 die and swap with a gen7750? Link to comment Share on other sites More sharing options...
Toadtorrent Posted June 15, 2009 Report Share Posted June 15, 2009 I think the recommendation is to change the wheel. There are a couple issues. If the tooth has broken off...the metal is somewhere in the watch. This tiny piece of metal is not much...but consider how small the contact points are in the movement of a watch...it's like taking a fist sized piece of metal and throwing it inside an engine block - it will rattle about and cause premature wear. If a tooth has broken off...it means that wear and tear has occurred and this should be addressed if you want the watch to last. If you want the easy way out...avoid winding...just use the autowinder, and the watch will work...but bear in mind, without a full disassembly and cleaning and reassembly, that piece of metal is still rattling about. Link to comment Share on other sites More sharing options...
siesta181 Posted June 15, 2009 Report Share Posted June 15, 2009 Full tear down, service and re-assembly with gear replacement. Get it done once and get it done right, Link to comment Share on other sites More sharing options...
dakatana2002 Posted June 15, 2009 Author Report Share Posted June 15, 2009 Done!Today morning...it take about 1 hour for disassembly cleaning and reassembly with new gear...He was really a lightning!!!...he used an orig 7750 and the gear fit perfectly!it's very strange for me...may be a new series or upgrade of a7750 to make more pieces compatible with eta7750? Link to comment Share on other sites More sharing options...
sander Posted June 15, 2009 Report Share Posted June 15, 2009 Done!Today morning...it take about 1 hour for disassembly cleaning and reassembly with new gear...He was really a lightning!!!...he used an orig 7750 and the gear fit perfectly!it's very strange for me...may be a new series or upgrade of a7750 to make more pieces compatible with eta7750? A full service in 1 hour? How much did he charge you? Link to comment Share on other sites More sharing options...
ubiquitous Posted June 15, 2009 Report Share Posted June 15, 2009 Seems a bit quick to me as well, sander Link to comment Share on other sites More sharing options...
Toadtorrent Posted June 15, 2009 Report Share Posted June 15, 2009 A full disassembly with someone doing it really fast usually takes close to an hour...that doesn't count cleaning and reassembly. He likely just de-cased the movement, removed the rotor and replaced the one gear...not a full disassembly, cleaning and servicing. Link to comment Share on other sites More sharing options...
dakatana2002 Posted June 15, 2009 Author Report Share Posted June 15, 2009 He disassembled all the mechanics in less than 30 minutes...i've never seen a so fast working...he put all the pieces as disassemble it in a sort of container with a lot of small divisions in it and then put it inside a cleaning machine...we make a coffee break and the parts are washed and dried...after this he refitted all the mechanics while using 2 or 3 tipes of lubricant (i don't remember but i think 3 types and one of this was black and very liquid and evaporates very quick leaving a sort of grey powder on some parts of the watch)... after about 40 minutes the mechanics was completely assembled and then it refitted inside the case...He told me to wear the watch for about a week to know if any adjustments was necessary. he also told me that the mechanics was very good...really impressive for a chinese workmanship!and no teeth inside mechanics nor dust...he think that it was missing from factory... p.s. he worked for about 25 years in a breitling authorized service center in italy and the cost of all the works was 30 euro and a coffee. Link to comment Share on other sites More sharing options...
Shundi Posted June 16, 2009 Report Share Posted June 16, 2009 Nice! Link to comment Share on other sites More sharing options...
dakatana2002 Posted June 16, 2009 Author Report Share Posted June 16, 2009 Just for infos...the rachet gear was a "frankengear"...he take out the axle from old a7750 rachet then the same from the eta rachet and refitted the asian axle into the eta rachet...he used only 3 tools to do that...first he fitted the gear on a small piece of iron with a lot of hole of different measures(i do not know the name of such tool) than pressed the pinion of the old rachet out of gear with a flat alluminium tool...the same for the eta rachet then it lay the asian axle on the eta rachet hole and then it used a sort of punch with a hole inside the same measure of the axle of asian gear...he pressed the punch and the gear was fitted inside and firmly with the eta rachet and a "frankengear" was born! all this just because the axle of eta rachet are bigger than the asian... i hope this can help to fix this problem. Link to comment Share on other sites More sharing options...
dakatana2002 Posted June 16, 2009 Author Report Share Posted June 16, 2009 (edited) another duplicated post...excuse me again...i posted the same 3 times... Edited June 16, 2009 by dakatana2002 Link to comment Share on other sites More sharing options...
dakatana2002 Posted June 16, 2009 Author Report Share Posted June 16, 2009 (edited) Wrong post...excuse me Edited June 16, 2009 by dakatana2002 Link to comment Share on other sites More sharing options...
nicewatches Posted June 22, 2009 Report Share Posted June 22, 2009 Congrats pal! Sounds like you have an excellent watchsmith. Link to comment Share on other sites More sharing options...
slickdick Posted June 22, 2009 Report Share Posted June 22, 2009 Congrats indeed, willing to work on reps, seems to know the job very well, and is not expansive! Link to comment Share on other sites More sharing options...
dakatana2002 Posted June 22, 2009 Author Report Share Posted June 22, 2009 he also told to me that the balance shaft is the same...as a lot of others gear in the mechanics...i think that may be helpfull to most of us to collect all of this information in a single post...for example the gear exchangeability of the 7750 the possibility of create a frankengear and so on that can help to suggest at watchsmith the right fix tips for a7750. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now