Leaderboard

I became the proud owner of a gen Cermaic Sub on Tuesday and thought I would do a couple of comparison shots for you. One note on the gen though, I did intend to sell this one as I bought below retail but this watch appeals to me more and more as I look at it and wear it! The fit and finish is much higher than the model it replaces. Also you do get used to it's bigger appearance. The clasp and bracelet are very impressive and the Ar'ed cyclops is brilliant in practise. Anyway onto the comparison. I'm not one for long reviews but the biggest differences between the 2 are as follows: Crown guards are shorter on the gen making the crown appear more proud of the case than it is. The bezel is too high and the teeth are not high enough or deep enough. Rehaut is not as tall on the gen which gives the crown a hiher position compared to the rep. Crystal not as crisp but that is normal on rep Rollies and no AR on cyclops. The date font on BK's datewheel is very good with no noticable difference. Hour markers have a rims that are too thick and also are slightly smaller than the gen. Hands on the rep are bigger in size. Bezel pearl is too dark on rep but the bezel finish is pretty good. figures are slighlty brighter o the gen watch. Gen insert is flatter. Case is not quite as crisp on the edges(fairly normal on reps though). Bracelet is quite good with quite nice SEL's. Lume is more blue on gen but the rep is not bad. I forgot to do a lume shot for you so I will add this later. All in all if you did not have them side by side you would only really notice the thick bezel and markers straight away and the rep is a nice watch in it's own right. Only the pure beautiful finish of the real watch shadows it when along side. Onto some pics!

Since the diver came out I have been asking the dealers to rep it. A few months later news came that it was in the works. First we had the release of the Chanel factory, which I was not satisfied with. Then we had the supposedly 1:1 V2 diver from the Noob factory which I also was not satisfied with. Too many flaws while they could make some great other 1:1 watches with barely any flaws. I kept on asking and it finally came. Angus bought the gen piece for the Noob factory to get it repped and here we are! On Tuesday I got the message that I could go pick up the AP Diver at the local post office. That was the first thing I did in the morning. After opening the package Angus sent me I was astonished. I have been collecting reps for 4 years now and by each release I am surprised by the level of accuracy that these reps have obtained. Being a fan of Audemars Piguet in general and the ROO line I have owned many of the models being released by the factories. They were all superb, no problems but this Diver goes a bridge further. The level of details is stunning. As an AP horolofile I felt I needed to post another review. Since I the better camera is at home I have shot some pics with my iPhone. But keep an eye on this review as I will do a photoshoot, probably the upcoming weekend. Let's go! <iframe width="560" height="315" src=" http://www.youtube.com/embed/QlluIP-4sL0" frameborder="0" allowfullscreen></iframe> In 2010 Audemars Piguet has chosen to expand their Royal Oak Offshore line with the introduction of the new AP Diver. While other Royal Oak Offshore models were built to endure your sporty adventures, there hadn’t been one that could accompany you underneath the sea. With the Diver, AP’s remedies that situation. AP takes a cool, minimalist approach to its diver with just the essentials of time, date and a bezel to keep track of your dive time. They are quite capable of wowing us with complications but while you’re fish gazing and marveling at the wild plant forms swaying below, you don’t have a lot of need for those fancy extras. AP made the right choice in keeping this dive watch simple and functional. The baton hands are thick and prominent against the black “Méga Tapisserie” pattern that has become AP’s signature in the ROO collection. To ensure the visibility while diving the hands as well as the hour markers have lume applied on them. On the genuine item the hands are made out of white gold, what is worth mentioning. The majority of dive watches choose an outer unidirectional bezel to mark dive periods. AP went with an inner rotating bezel, which not only keeps the shapely octagonal case intact but also provides a more secure solution. You don’t want an accident or miscalculation when you’re a long way from a breath of fresh air. Unscrewing the crown at 10 o’clock operates the inner rotating dial ring which can be set on each minute. Characteristic of the Offshore collection, metal - in this case, stainless steel - intermingles with rubber in the molded crowns and strap. The black and gray color combination also gives it a versatility that can wear from completely casual to looking right at home in a more serious setting. picture from Patrickm500 In order to maintain water resistance, dive watches of necessity need a solid case back. On the genuine item Audemars has chosen for the 21,600 bph 3120 caliber with full gold rotor. The Diver meets all the international requirements for diving with a depth rating to 300 meters. Most people wear a dive watch for the sporty looks and because they have an appreciation of the technical achievement. They don’t often plunge to the depths of the ocean to check out the accuracy of the specs. However, if you want to test the Diver’s mettle, AP invites you to do so. On their website they show a world map of urban diving spots, helping you to plan your next underwater excursion. 1. Case finish Overall the case finish is superb, as with all the other ROO's available. The brushed and polished parts are excellent and well finished. As well as the bead blasted back of the mid-case (not the caseback). I can't really comment on any flaws at all concerning the case. The crown is made very well as well, not seeing any obvious flaws, size is correct, it feels solid and it has a rubber washer for waterproofness. 2. Caseback Great as well, the inner circle with the bead blasting is very very close but imo just a tad away from the gen finishing. Which is ... NOT that much noticeable. Engraving of the caseback serials could have been done a bit deeper and the font of the N° could have been closer to the gen. Thickness is perfect and inside finishing is great as well with the swirl finishing and Audemars Piguet Swiss Made engraving. Gen on the right, rep on the left Inside swirl finish & engraving, pic by Angus/Puretime 3. Crystal The gen AP Diver uses sapphire crystal with an AR-coating, after contacting AP I got to know that the gen had an AR coating on the inside only. Which is colourless. Angus passed this to the factory and tadaaa, here we have got ourselves a crystal 1:1 as per gen. <iframe width="560" height="315" src=" http://www.youtube.com/embed/MAXlH-7Roeo" frameborder="0" allowfullscreen></iframe> 4. Dial & Inner rotating bezel Dial appears to be 1:1 with the gen imo. Datewheel cut-out is fantastic as well as the batons applied. Lume is not that strong for this kind of super rep. It's good but not as strong as the gen. So for nitpickers I'd count in the cost of a relume job. Wonderful thing with the dial and the combo of the AR on the crystal is the look of the dial with direct sunlight, the mega-tappiserie dial really gets popped up. Also the markers give some reflection, which makes it a bit of a bling watch. Subtle but it's there! The bezel is well made, the turning mechanism is copied from the gen and clicks in on every minute counter. It has the correct satin finish as per gen. One thing I should mention is the lume, imo the lume on the rep is somewhat thinner than on the gen, the gen appears to have slightly thicker applied numbers on the bezel. Which makes them look closer to eachother compared to the rep. As for the lume, same as with the dial, nitpickers, count in a relume job. IMO it's great out of the box, remember what we pay for this watch compared to the gen price... The bezel crown feels very well made and has got the rubber washers on the tube for waterproofness. Gen on the right, rep on the left. 5. Strap & buckle I have never been a great fan of the V2 strap as it was wrong in every aspect. As well as the buckle. With the strap of the V3 they did a great job. There is a minimalistic difference as per gen (texture), the buckle shape and the buckle engraving are on par with the gen, but the gen is a bit more brushed. The gen strap is stiffer as with all the gen AP ROO straps. The strap wears very comfortable. I have a 7" wrist and it's not too big. However, if you have a 6,5" wrist I'd advice to get a short gen strap. The endlinks are great as well and stick a tiny bit out above the case though I find that the gens stick out a tiny bit more. There are no pics of a bracelet on the Diver, I have tried this but I could not manage to do it. Torobravo has posted some pics of the Diver with bracelet where he claims it fits. Let us know how, I'd love to have my bracelet fitted as well! . buckle shape as per gen buckle engraving as per gen, "acier inox" & stamping at the correct position Correct engraving, pic by Angus/Puretime Correct stamp & position, pic by Angus/Puretime 7. Movement The V3 is available with 2 types of movements, the Asian 2824 and the Swiss Sellita SW200. I have chosen the Asian 2824 as I won't be using the movement. I will swap mine with a genuine ETA2846 that has got 21,600 bph as per gen (yes I am an "AP" nitpicker) . The current datewheel is on par with the gen, differences are not noticeable with the naked eye. As for the movements whether or not I would have changed it, I'd pick the Asian over the Swiss as I have owned bothe and I do not see anything why I should pay $90 extra. Both movements work fine. Save the $90 for an upgrade or your next rep! antimagnetic shield, picture by Angus/Puretime Asian ETA 2824, picture by Angus/Puretime 8. Cyclopse Better than I've expected. It is AR'ed which is wonderful but imo it's a bit too blue. Does this bother me? No, not really or maybe it's better to say not yet... It's only visible at some angles but during the day being outside it's ok. The gen HAS GOT blueish AR, but this only visible from certain angles. And honestly it looks more colourless than blueish. AR on the cyclopse, picture by Angus/Puretime 9. Hands Hands are shaped as per gen. Gen hands are white gold as previously stated. 10. Bezel screws Bezel screws are a tiny bit recessed, hard to see from the pics. On the gen these are white gold. Nitpickers, the screws are not uniformly recessed so you know what to do . -------------------------------------------------------------------------- Overall impression: Wonderful value for the money The best AP rep available Astonishing quality/finish compared to the genuine article Nitpickers, count in a relume and a re AR'ed cyclopse For me this is the nicest rep I have owned FLAWS (guys, you should know that I am a real pain in the *ss nitpicker, most of these flaws can only be seen up close): Bezel numbers should be closer to each other, but this can be modded, it's due to the lume. Cyclopse is too blue. [*]Caseback engraving should be deeper + font should be a tiny bit different. [*]Bezel screws should be uniformly recessed. [*]Strap texture is a tiny tiny tiny bit different from the gen [*]Buckle is more brushed on the gen [*]No superlume GO ORDER IT! Thanks for viewing my thread. Please feel free to post your AP Diver pics and impressions! Allthough pics do not do this watch any justice. This watch was ordered via PureTime. A true asset to this community. It was a pleasure working with you Angus! Links to the watch: http://puretime.co/product/royal-oak-offshore-diver-11-v3-noob-best-edition-on-rubber-strap/ Can also be ordere via ToroBravo, another trusted Dealer, and another true asset to this community! I'd like to specially thank "repitup" as well for helping me with the comparison pics gen vs rep! Thanks T.! Some VIDEOS: <iframe src="http://player.vimeo.com/video/24743422?byline=0&amp;color=ffffff" width="500" height="281" frameborder="0" webkitAllowFullScreen mozallowfullscreen allowFullScreen></iframe> Now, did I just had you all?! * Book by Audemars Piguet for the 40th Anniversary of the Royal Oak. Can be had trough an AD.

RWG raffle Watch

Black Pepper and Lime Potato Fries with Parmesan...

I believe that is where his site finally morphed too. If you do some research here these links will help. http://www.rwg.cc/topic/126724-replicawatchreport/#entry919973 http://www.rwg.cc/topic/52619-who-is-richard-brown/page__hl__%2Brichard+%2Bbrown As you will see Richard still drops in here from time to time as audmarsfan. O/S

If I were you, I'd be more worried about the cellphone in your pocket microwaving your balls than the watch on your wrist...

Oh my eyes Why oh why

Perfect way to end a long day...

The new noob factory Rolex Explorer II is a very nice watch, superlumed dial, great case set, not a bad watch at all, however, it seems all or most of the dials have a wonky 12 marker, maybe the 6 and 9 marker too, the one I got did, thats for sure..... Check out the crooked markers on the QC pics! So, I thought what could be done? I like white dials, but I also don't like gloss dials a great deal, I much prefer a matte finish, like the black dial 42mm Explorer 2 So I picked up a can of Mr. Super Clear Flat UV Cut Spray for about £10, and took the watch to pieces, removing all the hands and the dial. I took off the 6 and 12 markers, and carefully reglued them in the right place, then proceeded to gently add a few coats of Mr Hobby onto the dial, ever watchful for dust..... Once the dial dried I reassebled the watch, lining the hands and the date change as you should, and the results are here in the following pictures, please let me know what you think! I have to say I was really surprised at how well it turned out, the dial has zero reflections, only the crystal reflects, the finish is lovely and soft, and the lume is the same as before, just as bright. The watch is totally transformed, on my wrist now, and not going anywhere! I am so tempted to do the same thing to my 42mm white Explorer II! Thanks for looking, any questions, please feel free to ask!

And if its possible that he can service my watch, what should i tell him to "service"?

They need to make a new 1:1 version!!!

@Dizzy The pictures do show only small differences but in the flesh it is very clear which is which. @monacoV4 The markers are slightly raised but no more than normal. The gen rings are thinner and more shallow making th erep look worse than it is. Here is a lume shot guys and this is a surprise based on previous comments made about the Rolex blue lume models. It is harder to tell as my camera does not show the correct colour rendition but the gen is more greeny than the very blue rep lume. People say the gen is blue but it is more turqoise than a true blue however long it is exposed. Rep is on the left as other photos.