Defender110

the rep bezel is press fit the the rep case.. mask off the rep with electrical tape(several layers) and pry up the rep bezel w/ a caseback knife. however to fit the gen bezel you need a complete GEN set.. 1. gen bezel 2. gen bezel inner mounting ring 3. complete screw set i cannot source the parts separately. i only have complete sets. problem is the bezels on the bay are NOT COMPLETE. they are from diamond setters that replace a customers bezel with a stone set bezel, and they reuse the inner rings and screws! and sell off the parts they don't need... don't get scammed!

do we need an mbw ap roo w/ sec. @ 12 when we have the latest sec. @ 12 version from rep factory?

my white dialed evo from this batch is defin. different. the crystal height to bezel height is TOO CLOSE. crystal edges of the case (the POLISHED ring area) should be 1.5mm higher. on mine it is same. no i have not fitted a gen bezel... as i CANNOT get this rep bezel off!!!!!! removed the screws, removed the tabs, still NO LUCK, tried masking off the case and prying up will a caseback knife.. NO LUCK this bezel must be pressed on with alot more tightness then any other rep! im gonna have to get a bezel remover and very slowly try and get this off... it went on right! so its gotta come off eventually....

regarding this NEW updated evo. then case is INCORRECT when compared to V2or gen EVO. the mounting/case for the crystal is TOO low. the bezel mounts to the case, and the inner case protrudes just slightly where the crystal is mounted. on this one the crystal/case part fits flush or just about flush with the bezel.. casing the bezel tabs to be too high but is is also incorrect when compared to the v2 case or genuine EVO. this inner part should be ~1.5mm higher than bezel hieght.

thanks for confirming the steelfish is a buger too! with SA's its pressed on... the screws for the SA rep are FAKE. :-) tape the case, and pry it up with a putty/caseback knife, take some pressure but it will eventually pop up. with this EVO though... I put a whole lot of pressure and nothing.

so i recieved an EVO V2/3 rep.. i removed all the tabs and the outer screws... but the **** thing will not come off.. i wrapped the case in electrical case and even tried a case knife/putty knife to pop it off.. but this thing is TIGHT... suggestions?

has anyone fitted GEN PROII bracelet on a rep SA case?? i'm sure several members here would like to know if: this fits 1:1 no mods needed this does not fit this fits w/ minimal mods thank you in advance!

i have been trying to use search.live to use checkout/cashback from a listed vendor... it looks like my service provider is blocking this as when i use my AIRCARD no problems.. when i use 10/100 plugin BLOCKED. ??

4pm here on the east coast.. just checked again and the link is at 20%. .. but not working fully for me. also the live.search buttons linkiing to outside vendors is not working either.. so when i search for something then click to by from the vendor i get a dead link/window... ?? the help feature also is not working. ??

toady its at 15%... still up to $250 though.. :-) can use it three times!

i see 25% and it show up at my checkout.. the paypal code may be suspect as its tied only to chosen accounts... you may or may not get the additional 10%.. the ebay 25% is good for 3 items per account! :-) now... should i get a ..... PO 42mm or 45mm ???? help! asi might get both!

re: the safari dial with the black numbers... is the black luminova? cheers!

wifi hacking... have you ever piggybacked a neighbors access point.. not an open access point which is done practically automatically but antennas now, but a secure wifi router?

general thoughts? or tools?

very very nice.

i though of this thread some time ago and never got around to posting it... with ETA/Valjoux the foremost movement maker, watches powered by these little mass produced marvels abound!!! lets see if we can name the most expensive and least expensive watches powered by their movements. rules: no gem, jewels or stones. case can be made of anytype metal. must be a nonmodified movement but CAN be reworked, polished, and or certified. list price value, and or street value will be considered. categories, most expensive/least expensive: 7750 7753 2836 2892 6497 I hope we get lots of INPUT and postings!! PS: if you must post a pic. please make it a thumbnail or reduced size pic as i hate when screen scrolling get sluggish

the leather interior in far inferior. mostly my gut feeling.. the interior cushion looks like plastic.. the top case font SEEMS off know the gen = spot the fake

Item number: 260250800129

'this provides a little insite to the source of the gen pam items??? Philippe {BONAY} is a great guy, an excellent watch promoter and industry executive.

1. i have genuine parts for this watch. yes and hands. however very $$$$ as these are the last of my stocks and they are on NATIONAL B/O with no e.t.a. from breitling.ch on shipments. if you cannot afford 4fig don't ask or beg please. yes i have dials black/white in stock, blue i can order. yes i have NEW OEM bezels, with all screws and the INNER MOUNTING RING!!! you need this! those on the internet are pulled bezels and do not have inner ring and /or screws as the ADs reuse these when mounting the new dia. bling bezels. 2. i have the gen watches. the crystal is also with some 'coke affect' i believe this is because the watch is so deep. while is is better/not as severe as the rep w/ AR the gen is not like other more shallow watches or even like my gen PO chrono's. 3. if you know of a aftermarket crystal that will fit, please post in this thread or PM me! :-) ps: please note that many ADs are using the avenger hands (shorter) when making dia. modded gens. since these are avail but the SA (larger/longer hands) are OUT OF STOCK.

I own the gen PO Chrono. get this as a GEN! for all the the resaons listed above. spend about $4200 on bracelet and if you want the straps go with the rep straps/and buckles... very good quality.. but to get the gen bracelet afterward will be a big hit... ~800+ cheers!

bump. me too. :-) if i'm gonna post.... at least i can say is... Cheers To All!

hello just in Today.... genuine BLACK EVO dial and a few more bezels... of course with inner tachy rings, screws tabs, mounting inner ring. and... NEW Stock eta/val 25j 7750's factory fresh. cheers!

Breitling Chronomat Evolution A13356 Item number: 130220213160

upo arrived with fallen off dial marker... best glue to use for fallen dial marker? something i can get in USA. :-)