irate03

i have a rolex explorer rep which was apparently made in SWITZERLADN

does this count

in 50 years CERAIMC will be worth thousands

inspired by the earliest of rolex and pams prototypes for the 3646. So, parts: Case, Nejad 3646 reshaped and thinned, including squared off neck around the crown tube. ( thank you V and L ) Dial, Daytona, painted and lumed by me. movement, hammered brass, Swiss vintage arnex 6498. coin edge ring is by Sjef thanks for such a quick turn around on this. hands, binbin, sized, blued complete with bent tip on the minute hand. seconds came from one of the 6498's I had. strap made by me, thanks to Bloo for the offcut it's like butter on the wrist. Buckle of course is by Elias. Lume on the dial and hands is a mix of Cornholio's and V10 for the graininess.

a couple more shots of this build

what is the crystal/plexi ? I'm about to start reshaping my silix 1016 again and wanted to replace the plexi, but the clarks correct plexi doesn't fit.

here's mine, silix 6200 tropic build

These are hand made by myself either for my own builds or for watches I make for others.

Well yes idealy I would love to have put a rol ex 618 in the RP and an Angelus in the MMLP but I don't have 10 grand just lying around sadly.

The colour of the hands were scraping down the chalkboard of my OCD so I stripped them back and heat treated them again.... Now I am content. quick new photoshoot. Boxes are hand aged. Case is a reshaped River 6154, crown replaced with an Athaya V2 gen shape Dial is painted, filled and lumed by me Hands are GEN Angelus hands, taken from an angelus travel clock. Sadly I didn't get the movement just the hands. I had to (carefully) remove the Radium completely before I broached the holes to fit the 6497, as a result I had to sand back to base steel and heat treat them to get the warm colour. movement is a vintage branded cortebert Swiss 6497 strap is new leather aged and put together by me with an Elias aged brass buckle

a gen MMLP ? sized for an Angelus movement ?

do you have a dial ?

thought I would share two recent vintage builds with you.

My inspiration. 6152 angelus with arrow hands. River 6154 case heavily reshaped. (6152 shape cases are very difficult to find now especially one's that accept third party components) Athaya 8mm V2 crown + tube, case soldered around tube. dial, painted, resin filled and lumed. GEN angelus hands cleaned of radium (CAREFULLY....it was looking loose and unstable) broached to fit 6497, heat treated. powered by a cortebert 6497 with H3 set fitted. strap aged new leather made by me with an Elias brass buckle. gen shot my build

and most recent built with a 44mm brass case, reshaped and fitted with an Athaya 8mm crown. Swiss hammered finish 6498 daytona dial, brown tropic + cornholio lume athaya angelus hands, heat bronzed + cornholio lume ammo pouch leather strap made by me.

not a pam homage, more of a russian U boat style mashup. basically a cheap rep off the bay, gutted and rubbed down to the base metal, oh and I drilled a little hole for a sub style pearl, you know, just because. Nice brass crown cover underneath the black soot paint. Fitted with a russian molnija 3601 krystal, a vintage tropic cali dial and angelus hands. NOW it's a wearable watch.

got a new box

+1 what he said, These are build up from custom parts, these were made for other people sadly not me You will find similar builds over at HF

No it's an Athaya case.

thanks mate

a couple of new vintage 6152/1 builds

finished some more lovely brownies

My christmas present to myself