klocklind1

Yes he does and I got QC- pictures one day and it was send to me the day after

I can not understand that so many think it SO important to have the "Officine Panerai" upside down on the movement for the destro when ALL replicamovements is MILES away from looking genuine

Just got the trackingnumber on my 219L Now the wait beginns, but the 177L took only four days to get to me and I hope this is as quick

So You got it in the end R Yes the pam 177L really IS a very nice pam I have ordered the new pam219 today from the same factory and I hope that pam is the or even better than the new pam111J. But the new finely engraved movement in the 111J is way better than the pam 177L so it is ALWAYS something that is less good with one replica compared to another

My clickspring got broken when I tried to bend it I would not recommend to bend this spring to make it harder to turn but that is the WM9 clickspring

R......... I know You will absolutely LOVE it It is without ANY question THE best titanium pam replica ever made ( apart from the movement!) . The lume is VERY VERY nice But I think that the hands are from the same maker as DSN pams as it has the same color in "cloudy daylight". By that I mean that the color of the indexes and hands are DIFFERENT in that kind of weather, but You will not notice that in sunny days and inside I do not know what color of the lume the genuine 177 has but I would like to have them more to the WHITE in color this one is more to the green . I can not understand that it can take so long time for You to get it as I got my from Joshua in THREE days ( 19 dec and arrived in the morning 22 dec )to EU with EMS, maybe I was lucky?!

Have You ever had any GENUINE titanium watches to try that it is harder ? The ONLY titanium that is harder/equal to steel is a mix called 6/4 that is used in screws where and it is ONLY ONE watch that is made of that titanium and that is the Tag Heuer kirium. The rest is using the "standard 3/2,5 mix.

Check this site ! It is a GENUINE pam 177 and they say You will get exactly the watch on the pictures !!!!! http://www.replica-time.com/panerai-panerai-pam-177-titanium-marina-black-dial-pam-00177-p-2563.html

Good advice too And do NEVER use loctite of any kind of the strap-screws as You will probably NEVER going to be able to unscrew them without damage the screw or case Always try to "feel" the threads when You screw them back in to the case and remember to use the SAME screw in the SAME lug because it is safer that way to not get the threads damaged But the threads on the pam new 177L is the BEST I have seen on a titanium replica watch

Loctite can be a good solution BUT specially on titanium-pams it can be a good thing to ONLY put some Loctite ( the BLUE one !) on OUTSIDE of the screws for the crownguard, as I think that is enough to hold the screws in place! Titanium is softer than steel ( and get damaged much easier than the steel cases!) so that is why I reccomend to use the loctite on the outside of the CG screws because if You use loctite on the whole of the screw there is a risk of not being able to unscrew the screw without damaging the casethreads BUT if You use the weakest Loctite ( there is three of them !) You might be able to use loctite on the whole of the screw

I am also VERY happy with the click-spring from Clarks that is more genuinelike But on my V3 sub the original WM9 clickspring is almost the same as the genuine ( compared to my genuine seadweller!) But on my WM9 LV sub it was way to loose so You might be lucky sometimes

Hi all Pam lovers! I just wanted to tell You to check ALL screws on the new Pam177L as when I was taken my apart I could VERY easy to unscrew the screws at the crownguard. And they would have been dropped if I not had them tighten, so use the right with of an screwdriver and try to tighten them so You will not loose them! And the strap-screws is made of TITANIUM ( I am almost sure of that!) and is VERY nicely finished BUT be sure to use the RIGHT screwdriver and tighten them properly. But remember that the screws made of titanium might be weaker in strenght than the steel ones! ALL IN ALL IT CERTENLY IS THE BEST TITANIUM PAM MADE PERIOD

I had the same problem with my EL case, where it is engraved "SWISS MADE" on the EL caseback ( on the inside by the threads !) and when I tried a non "SWISS MADE" caseback it did not fit So perhaps You need a EL caseback ????

ALL the WM9:a subs have "something" wrong But it depends how critical You should be Her is some pictures of my WM9:s subs Crown position picture is my V3 sub The bracelets is ALL the V1 ones with the clasp from the V3 Last picture is the V1 sub with the LV dial !

The crown position is EXACTLY 0,45 mm to LOW on the VM9 V2/V1 compared to the V3 The V2 use a eta 2678 movement and that movement has the SAME crownpostiton as the Eta 2836-2!

NO I just thought it was a little bit funny

Found this nice picture on another forum!

It does not bother me either as I am going to put in a OLD school eta 6497-1 with VERY fine CDG ( and dagger regulator )on the movement. I have found that the SWISS eta ( both non china-modded and china-modded ones) is working better than the 100 % china eta movements!)

I am also waiting for the QC pictures to come "today" from Josh ? Can You pleeeeeeeeeeeeeease post thoose QC pictures

Is the crown springloaded on this one ?

He certenly could get the new Pam111J so he should be able to get the Pam 177L But he is on holyday until the 6 th of jan so You have to wait!

Thanks a lot for that info Here is a nice picture of the genuine Pam 177 http://www.blowers-jewellers.co.uk/PAM177_S13333.htm

I have only seen that "gap" on the titanium pams

Oh ! Congratulations Have a nice holyday Check up this national park north of Kuala Lumpur, if You get tired of swimming ! http://www.taman-negara.com/ The canopy walk in the trees is VERY nice And take the boot trip on the river to the park also! There is two day trips from KL. Enjoy Your holyday