klocklind1

I saw this site : http://cgi.ebay.com/New-Genuine-Rolex-Watch-Stainless-Steel-Crown-24-603-0-/250486955949?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3a522f9fad+ Here You can see that it IS the SAME crown for a LOT of datejusts and the Ex II/GMT etc. But the price is HIGH I think! Have anyone bought from here?

It is one of the first with 3135 movement in it and is an X series ( 16220!) from 1991 and it has saffire! The crown is exactly 6,00 mm and looks like a Expl II crown. So it looks like it would fit

Thanks a lot for that Ubi! I will try the genuine crown from my datejust if it fits on my noob EX II!

Hi all! Has anyone here on the forum tried to mount a genuine crown from a datejust on a noob explorer II? Is it the SAME crown on a datejust as it is on a explorer II?

My V3 bracelet (endlinks!) fits PERFECT on my V1 WM9 sub BUT as By Tor says the V1 endlinks is absolutely the best endlinks made and spot on with the genuine one (almost anyway!) But I use the V1 braclet ( with solid middlelinks that feels a lot better than the sloppy hollow midlinks!) and a V3 clasp and love it

Any pictures of the steel crown ?

DSN has titanium 22 with or without Panerai engraving and 24 mm with engraving!

Welcome back BABOLA Very nice to see You back again ! Keep on posting

Yes the finishing and the pin might do that they different but is the same one! PS! TB says that his CG is MADE in SPAIN !!!!! And I do not think Snebo CG is made in SPIN !!??

Yes it looks nice ! I think it is a DSN dial and Snebo CG and a pulp crown ?????????

Hi there! The TB CG NEEDS more modding than the pin ! Since the TB CG:s lever ARM is too thick ( when You look at it You CAN see quite a lot of the arm between the crown and the CG body, and You should NOT see anything of it!) it needs to be sanded down quite a bit. This is quite easy to to, You just press or tap out the pin and then You use a small round diameter "file" to sand it down with. Hold the arm steady and then sand it down ( on the inside !) on the part of it that You can see when looking at it closed ( mark the area that needs to sanded down with a pen so You sand down the RIGHT part of it. On the TB CG the pin is attatched to the ARM NOT the body of the CG so be CAREFUL NOT to sand down the end of the pin to much because then it might get "sunken" down a bit too much when You pressit back! The arm on TB CG works perfect with the T48 even if that crown is recessed quite a bit, just had to sand down the case a LITTLE bit to get it flash against the case ( I used it on my 111H with DSN case! I do NOT think the Snebo CG is the same as the TB but I can be wrong I think that the TB one is more accurate of the two!!! Ther is a very nice comparison between the V, Snebo and the original one see this link from repgeek: http://repgeek.com/showthread.php?t=91522&highlight=SNembo

Thanks a lot B for that nice lumeshot If that is his tritiumsausagedial then his "L", luminova sauasagedial will be even more bright or ?

Thanks D for Your answer. I have only bought a pam 217 dial and hands from him and the dial had VERY bright lume and the hands also. But

Hi all! Is there anyone here that has bought the latest pam111E from DSN ? If so can You please post a LUME picture of that dial ? Does his LATEST sausagedials have good superlume ? namnl namnl

Looks VERY nice I think

I agree with everyone here that says that the VM 9 BK Yatchmaster IS the best "out of the box" rolex replica You can buy I saw the genuine one in the window of an AD dealer and I must say it is soooooo close to the genuine Just wait for a second hand one and be QUICK to buy it

When I was KL chinatown ( 2005!) was a nice place to buy replica watches! But if You want the good stuff then just as a dealer there and he might can bring You one! But they do perhaps not have the nice watches at the street ( they will get You a specific watch that they collect somewhere else!) but the chinatown market street they HAVE permisson to sell on that street! Just ask for chinatown and You can not miss it Good luck

Thanks Tribal! What about the 0,45mm in difference of hight ? Will the tubeposition be the right in the V2 case when using a 2824-2, do You need to do some modding for it to fit ? Is the V1-1,5 sub WM9 be the same as the V2 exept for the crownguard is better on the V2 ?

As Daniel197880 said, the eta 2836-2 will ( BK told me this to!) fit BUT You need new hands because the hands are DIFFERENT size on the small movement and the 2836-2/2824-2. And I think You will need another movementholder ring to fit the bigger 2836-2 movement in the case!????

The difference in height (crown position !) is exactly 0,45 mm between 2836-2 and 2824-2 ! But perhaps George has made the insert and crownguard different so it looks the same ?????

I love mine V3 The only thing that must be done is to sand down the sharp edges of the bracelet, BK has a thread about how to do it using 600 emerald paper and a toothpick. It really makes the bracelet feel MUCH better. Be careful to sand the edges at about 45 degrees ALL the time so You do not have to sand the side-edges also! Good luck with Your V3 and wear it well

Check Repgeek on the Panerai forum as there is a nice review of LH and Snebo CG! I have a CG from Toro and I like it a lot but I think LH is a little better but both has some faulths!

The genuine bezelinsert has real saffire crystal and 18k white gold round the pearl so You are absolutely right about the bezelinsert ! You MUST have a genuine insert on this beatiful sub!

kkkldfdggggfgg kkkldfdggggfgg [ce I got my V3 before christmas but I was ordering one month before his relese! YES it is a supernice watch BUT I thought that the magnification of the datecyclop would be a little bit more on the sub than the datejust ( compared with my genuine one!) and the explorer II????? But on some pictures of a genuine sub it varies a bit when looking at the date! But I think BK is using a 2,75mm gasket instead of the 3,00 mm but it MORE waterproof with the 2,75 mmm gasket I think!

kkkldfdggggfgg