bruce79 Posted July 27, 2009 Report Share Posted July 27, 2009 (edited) I've got a gen case set complete with dial & bracelet on its way to me. What movement would one recommend to use for the gen dial? Would a 2836 work? 2824 or 2892? I've been checking out some ETA 2892 movements on the bay...one is an ETA 2892 based Omega movement...what should I be looking out for when it comes to the diameter & height of the movement? I've got a movement conversion ring on its way from Stilty right now. Also, I'm assuming I cannot use the gen hands on the ETA movement...no matter which one I end up using. Can the gen hands be modded to fit the ETA 28xx movement or should I just use aftermarket hands? Can someone recommend a good supplier of accurate aftermarket datejust hands? Should I just source a donor rep datejust? Edited July 27, 2009 by bruce79 Link to comment Share on other sites More sharing options...
ubiquitous Posted July 27, 2009 Report Share Posted July 27, 2009 Depends on which case ref you have. If it is for a 3135 movement, you'll want either a 2824-2 or 2892-2 with the movement specific Stilty ring if they are available. As for hands- Just use Tudor hands. Easy, simple fit. Link to comment Share on other sites More sharing options...
kbh Posted July 27, 2009 Report Share Posted July 27, 2009 Start here:Birth of a Franken The hardest part about getting the right movement is making sure you have one where the pin heights for the hands are tall enough. The "normal" movement will not allow the hands to clear the dial surface. Also, go to Clark Watch Parts on eBay for hands. His user name is Nostalgia_2000, I think. Link to comment Share on other sites More sharing options...
bruce79 Posted July 27, 2009 Author Report Share Posted July 27, 2009 I see, I'm using a 16030 case set so that would be a 3035 movement...so I ordered a stilty 2824/2836 conversion to 3035 ring. That takes care of that. So Tudor hands will work on the 2824 movements because Tudor used 2824 movements in their watches, right. I suppose the bay is a good place to start looking for the hands. Thanks for your responses! Link to comment Share on other sites More sharing options...
Member X Posted July 27, 2009 Report Share Posted July 27, 2009 Good luck, post up some progress pics! This is something I want to do at some point Link to comment Share on other sites More sharing options...
ubiquitous Posted July 27, 2009 Report Share Posted July 27, 2009 kbh is right- You'll definitely want to go with taller minute and hour wheels to clear the indicies. But that's a pretty easy swap out on 2824's and 2836's. Requires a little work getting into the movement on the dial side, but nothing too painful. Link to comment Share on other sites More sharing options...
bruce79 Posted July 27, 2009 Author Report Share Posted July 27, 2009 (edited) kbh is right- You'll definitely want to go with taller minute and hour wheels to clear the indicies. But that's a pretty easy swap out on 2824's and 2836's. Requires a little work getting into the movement on the dial side, but nothing too painful. Hmm, I'm definitely going to need a little coaching with this. I am comfortable uncasing a movement and such but I'll have to look into the swapping of the minute and hour wheels. Once the parts get here, I'll post pics and will document the whole process. Edited July 27, 2009 by bruce79 Link to comment Share on other sites More sharing options...
Brightight Posted July 27, 2009 Report Share Posted July 27, 2009 Funny enough, I'm doing exactly the same at the moment, 16030 case and Stilty ring on its way! I've PM'd Stilty to ask what 4th wheel,canon pinion and hour wheel I should use for a 2824-2, parts are available from Cousins UK it seems. Seems to be the fashion at the moment to do a DJ Franken! Link to comment Share on other sites More sharing options...
kbh Posted July 27, 2009 Report Share Posted July 27, 2009 They are well worth the effort. The SS/white gold below is now on a gen vintage Jubilee bracelet. Link to comment Share on other sites More sharing options...
bruce79 Posted July 27, 2009 Author Report Share Posted July 27, 2009 Just a quick question. Is it safe to say that the ETA 2892 will not fit into the 16030 case...even with the conversion ring? It looks like stilty's 2892 conversion ring is only for the 3135 cases. So I'd be looking for either a 2836 or a 2824? Link to comment Share on other sites More sharing options...
Pugwash Posted July 27, 2009 Report Share Posted July 27, 2009 Where are you guys getting the gen datejust cases and dials? I'd love a steel case and silver or white dial. Link to comment Share on other sites More sharing options...
kbh Posted July 27, 2009 Report Share Posted July 27, 2009 "Roling" on eBay used to be the best source. He hasn't had any lately though. Link to comment Share on other sites More sharing options...
tomhorn Posted July 27, 2009 Report Share Posted July 27, 2009 a-and-e-watches always seems to have a big selection of cases and DJ dials. Some no reserve, many with Buy It Now or Best Offer. hitecpro also has them from time-to-time ... he has a 16014 now. Link to comment Share on other sites More sharing options...
ubiquitous Posted July 27, 2009 Report Share Posted July 27, 2009 They are well worth the effort. Agreed. Link to comment Share on other sites More sharing options...
Brightight Posted July 27, 2009 Report Share Posted July 27, 2009 Wow, those pics have whetted my appetite! I love the stick dials. I really can't wait to get started on mine! Small point, while doing research, think it was Stilty but not sure, I read that the fourth (seconds) wheel needs to be changed which makes sense if you have a higher cannon pinion. It's a simple enough job on the 2824/2836, and I have a 2824 in bits right now so even easier, am I right in thinking it is necessary? Link to comment Share on other sites More sharing options...
Brightight Posted July 27, 2009 Report Share Posted July 27, 2009 a-and-e-watches always seems to have a big selection of cases and DJ dials. Some no reserve, many with Buy It Now or Best Offer. hitecpro also has them from time-to-time ... he has a 16014 now. I got mine from A-and-E with a best offer of $200 which seems like a bargain. Though I just missed one with a gold bezel auctioned by jjwwatches with no reserve which went for about $210, an even bigger bargain, I was only just outbid too. Unfortunately the auction ended at 3am my time so I had to set it up to snipe, but just didn't put a high enough figure in. Stupid. Link to comment Share on other sites More sharing options...
kbh Posted July 27, 2009 Report Share Posted July 27, 2009 Wow, those pics have whetted my appetite! I love the stick dials. I really can't wait to get started on mine! Small point, while doing research, think it was Stilty but not sure, I read that the fourth (seconds) wheel needs to be changed which makes sense if you have a higher cannon pinion. It's a simple enough job on the 2824/2836, and I have a 2824 in bits right now so even easier, am I right in thinking it is necessary? There are a lot of people smarter than I am here, but what I've gleaned from reading is that there are about 5 different sizes(depending on which eta model). The standard canon pinion will work with a couple of the higher hour and minute wheels. The highest is about 1 MM taller than the normal size 2 set. This one definitely needs a canon pinion change. Somewhere there is a table of sizes in one of the Eta parts manuals. I just can't find it right now. The standard size (2) won't work though. If anyone has a link handy to the Eta parts diagram, I'm sure that's where I saw it. Link to comment Share on other sites More sharing options...
Brightight Posted July 27, 2009 Report Share Posted July 27, 2009 As easily done as said Sir - http://www.cousinsuk.com/PDF/categories/29_ETA2801.2-ETA2836.2.pdf Link to comment Share on other sites More sharing options...
tomhorn Posted July 28, 2009 Report Share Posted July 28, 2009 (edited) I got mine from A-and-E with a best offer of $200 which seems like a bargain. Though I just missed one with a gold bezel auctioned by jjwwatches with no reserve which went for about $210, an even bigger bargain, I was only just outbid too. Unfortunately the auction ended at 3am my time so I had to set it up to snipe, but just didn't put a high enough figure in. Stupid. I am looking at one of their 16030's right now. How was the quality? Did the case come in good shape? Also Ubi, nice dial. Have been looking for one of those for ages as the plain silver just doesn't do it for me. Edited July 28, 2009 by tomhorn Link to comment Share on other sites More sharing options...
Brightight Posted July 28, 2009 Report Share Posted July 28, 2009 I am looking at one of their 16030's right now. How was the quality? Did the case come in good shape? The case hasn't arrived yet, but I will report back when it does. If my head doesn't explode waiting of course Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now