Guest jsuperman17 Posted December 24, 2009 Report Share Posted December 24, 2009 I brought a 4th edition from a member here.. but when it got to me... the 7 o clock lume came off i was devastated.. what do i do?? do i try to get a dial or just get it fixed or send it back to him?? Quote Link to comment Share on other sites More sharing options...
triplehd Posted December 24, 2009 Report Share Posted December 24, 2009 Can you see the marker? If you can't do it, have someone remove the movement and pop the marker back in. The marker has two pins that can be inserted in the two holes for the marker on the dial. Hope that helps. Quote Link to comment Share on other sites More sharing options...
lanikai Posted December 24, 2009 Report Share Posted December 24, 2009 the main reason I learned to remove a movement was for these reasons and mainly at the time is ecause I wanted to get as many crystals to chief as possible.. all you need to fix this is 1 jewelers screw driver.. if you don't have a rubber ball case back opener.. duct tape will do.. rolled up into a small ball.. the PO movement is very easy to remove .. and replace.. go here to see how>Here sooner or later your gonna need to learn how to take out the movement and replace it.. it helps to start somewhere..it's not as complicated as you think..it is the basic 1-2-3..it's just the thought that stops us.. at first. AC/L Quote Link to comment Share on other sites More sharing options...
cornerstone Posted December 24, 2009 Report Share Posted December 24, 2009 Is it just the lume 'stick' or the whole marker that fell off? It's a fairly straightforward fix. Quote Link to comment Share on other sites More sharing options...
If you see Kay Posted December 24, 2009 Report Share Posted December 24, 2009 If it is just the sticker and not the metal marker, then all you need is a bit of glue stick on the back applied with a toothpick and press it on. Happened to mine as well. Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted December 24, 2009 Report Share Posted December 24, 2009 This is a common problem with the rep dial- The lume just pops off the marker. I've found that the easiest fix with best results is this: Quote Link to comment Share on other sites More sharing options...
maxman Posted December 25, 2009 Report Share Posted December 25, 2009 This is a common problem with the rep dial- The lume just pops off the marker. I've found that the easiest fix with best results is this: I could not agree more, the only way to go Mike Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.