rmf1972 Posted February 9, 2011 Report Posted February 9, 2011 is there any room on the list for dial, hands, and case? if so, i'm in thanks rmf
SERGEANT_AT_ARMS Posted February 13, 2011 Report Posted February 13, 2011 Is this still a go? Haven't seen anything here in quite awhile
MADRED7 Posted February 17, 2011 Report Posted February 17, 2011 @Paul....let us know whats up now please! Theo
Rolexfinder Posted March 12, 2011 Author Report Posted March 12, 2011 Hello, No pre-paid for this project. I invest both money and effort by myself, dont worry. For update, since I want to surprise you guy. my dial will be launched within this May. For List of the member who want this dial, let me finish my dial project first then I will contact you guy 1 by 1. Moreover, hence this project is limited, I might not be able to get the order for more than 1 dial per each person. I want to share this dial to the member as much as possible. Hope you guy understand this point. For price, I can say it wont be cheap But there will have a gift for who are in the first group buy list. Thanks for everyone who follow up my post from the beginning. I already got the lesson from my previous project. So I put effort the most in this project. As a hint, the dial of Pam 249 is one of the hardest dial to replicate to 100%. By now, 90% close to gen guarantee. Another 10% is in during correction. Everyone already wait for this project for almost a year. Only 2 months more, this wont be the problem, right? Best regards, Paul
Napoleon123 Posted March 16, 2011 Report Posted March 16, 2011 I think the price will break or make the deal with 90% of people. So do you have an estimate? Lets say, under or over 200$
Mr.Majestyk Posted March 19, 2011 Report Posted March 19, 2011 Your efforts are VERY MUCH appreciated..!!! Thank you so very much- peeps there is an artisan amongst us with the likes of Van Gogh, toulouse lautrec, Georges Seurat..... Can't wait for May.
thumpr Posted March 19, 2011 Report Posted March 19, 2011 Please add me for x1 dial and handset. Is the case set likely? Which case are others planning to use in the meantime?
sul Posted July 8, 2011 Report Posted July 8, 2011 Unfortunetly I will skip that project, my name in dial order list is not needed any more.
Rolexfinder Posted July 9, 2011 Author Report Posted July 9, 2011 Finished dial pics from Factory finally.
Jkay Posted July 9, 2011 Report Posted July 9, 2011 Looks good!! Congratulations on crossing the finish line of this project. Is it at all Gen to have gold hands? I don't know if I like the blue. (just so everyone is clear, this is not the new dial .. it's a photo of a gen, to show what this new dial is used for)
ubiquitous Posted July 10, 2011 Report Posted July 10, 2011 Looks fantastic, Paul! Great work on this one!
burnz Posted July 10, 2011 Report Posted July 10, 2011 Very well done! Definitely keen on one. Do let us know the pricing details when ready Sent from my iPad using Tapatalk
Jkay Posted July 10, 2011 Report Posted July 10, 2011 So what's the word on hand production? Are there hands in the works as well, or ?
errrlend Posted July 24, 2011 Report Posted July 24, 2011 I'm also keen on one of these. Keep us updated, RF!
Rolexfinder Posted July 26, 2011 Author Report Posted July 26, 2011 So what's the word on hand production? Are there hands in the works as well, or ? Hands is on the process after I got the finished dial. Hence they are seperated between Hands and dial section, I dont want my lume color into 2 shades. Just to make sure, it is 37mm? It is 37mm per gen.
Rolexfinder Posted July 26, 2011 Author Report Posted July 26, 2011 Hello, Because there are the waiting lists since last year, I sent the PM who wait for this project since last year first before I post here. Anyway, here it come the finished dial that send for me from my source. I have to say thank you for all of you who wait for this project and who give me suggestion. If I don’t have you guy, this project wont be existed! From the start since the first prototype till the very last prototype (the 5th), it took time to get the direction for the factory to make it clear (Language different problem ). In order to get the very close and nice dial, from mass production in the first place, factory have to change plan to make it 1 by 1 due to my condition (got a lot of complains from them that this work wont make the profit to them every time I met them like “If I knew this was the very difficult since the first place, I will charge you more!). And, we go , I proudly present OEM Pam 249 dial. Best regards, Paul
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now