edgematic1 Posted May 16, 2010 Report Share Posted May 16, 2010 A few weeks ago I was wearing my UPO, when I took the watch off my wrist, the clasp suddenly broke, the steal literally split apart. Anyone who has a spare clasp of bracelet? I already contacted hackR for his spare one. Anyone who also got this problem? Best regards, Ed. Link to comment Share on other sites More sharing options...
DemonSlayer Posted May 16, 2010 Report Share Posted May 16, 2010 Which part is broken, is it the pin in the middle? Link to comment Share on other sites More sharing options...
cib0rgman Posted May 16, 2010 Report Share Posted May 16, 2010 if the pin in the middle is broken. I repaired my using a cloth pin Link to comment Share on other sites More sharing options...
edgematic1 Posted May 16, 2010 Author Report Share Posted May 16, 2010 no, its not the pin, its the steel part where the pin is attached to Link to comment Share on other sites More sharing options...
BrianSW510 Posted May 16, 2010 Report Share Posted May 16, 2010 like I mentionned on RG, I might have a bracelet/clasp that may fit.. not sure. It is from the POrrika 42mm. Link to comment Share on other sites More sharing options...
edgematic1 Posted May 16, 2010 Author Report Share Posted May 16, 2010 brian, if you'd be able to measure the width, it could help to know if it fits, though I don't think so... Link to comment Share on other sites More sharing options...
BrianSW510 Posted May 18, 2010 Report Share Posted May 18, 2010 Ya, seems like it rather won't fit. Goodluck in your search Link to comment Share on other sites More sharing options...
edgematic1 Posted May 23, 2010 Author Report Share Posted May 23, 2010 somebody who can help me out? Link to comment Share on other sites More sharing options...
Bobbywaingro Posted May 24, 2010 Report Share Posted May 24, 2010 somebody who can help me out? Do you have a pic of the actual part, i might have some spare parts left over from my broken clasp Link to comment Share on other sites More sharing options...
edgematic1 Posted May 24, 2010 Author Report Share Posted May 24, 2010 Do you have a pic of the actual part, i might have some spare parts left over from my broken clasp I have attached the pic of the piece that I need.the attachment... Link to comment Share on other sites More sharing options...
TheH Posted May 31, 2010 Report Share Posted May 31, 2010 (edited) I'm on the same boat, that little ball pin or however you call it fell off. Edited May 31, 2010 by TheH Link to comment Share on other sites More sharing options...
FxrAndy Posted May 31, 2010 Report Share Posted May 31, 2010 I believe that that part if you still have it can be repaired with glue and maybe a little metal work like peaning the back side of the pin to ensure it holds Link to comment Share on other sites More sharing options...
david-aussie Posted June 1, 2010 Report Share Posted June 1, 2010 mine did the same thing. luckily I caught the pin . I use two part epoxy glue on the tip of the pin and its been holding for 3 months now. Link to comment Share on other sites More sharing options...
edgematic1 Posted June 2, 2010 Author Report Share Posted June 2, 2010 it's not the pin that broke off, the pin is ok, its the steel part where the pin is glued on, the steel piece has torn apart... Link to comment Share on other sites More sharing options...
fakemaster Posted June 3, 2010 Report Share Posted June 3, 2010 Did you ever get one of these? Link to comment Share on other sites More sharing options...
Bobbywaingro Posted June 3, 2010 Report Share Posted June 3, 2010 (edited) I have attached the pic of the piece that I need. the attachment... Sorry "edge" i just plain forgot about this. I got the part you need. But do you have the ballpin to get it togheter as well? PM me and we can work something out Edited June 3, 2010 by Bobbywaingro Link to comment Share on other sites More sharing options...
edgematic1 Posted June 6, 2010 Author Report Share Posted June 6, 2010 @ Bobbywaingro: PM sent! Link to comment Share on other sites More sharing options...
automatico Posted June 23, 2010 Report Share Posted June 23, 2010 I'm on the same boat, that little ball pin or however you call it fell off. I had the same problem with a SMP a couple years back...the latch pin pulled out of the clasp blade and I glued the pin back in the clasp with 'JB Weld' and it held Ok. I also put a couple small dimples in the pin where it presses into the blade to tighten it up a bit. I traded the watch away and do not know how long the fix lasted. I recently bought two SMP from yeldarb (one new and one like new): ...and they both have the catch pin riveted to the clasp blade with a pretty good size rivet head on the back side so maybe some models have been improved. One other thing I noticed about the two new clasps is that there is a little bit of up and down motion on the clasp cap with the cap latched down. The other SMP I had was fairly tight when closed and took some pinching to get it snapped sometimes. The tight fit might also have something to do with latch pins pulling out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now