plaifender Posted May 28, 2010 Report Posted May 28, 2010 Hey guys, Bought a gen crown and tube from for my UPO from cousins and just now realizing that I'm not sure if i needed to have also bought a gen stem as well. Do I also need a gen stem in order for it to work??
ubiquitous Posted May 28, 2010 Report Posted May 28, 2010 Well, it's probably better that you did buy the new stem; sometimes, when swapping the crown and tube out, there is a small difference in length thus resulting in either having too long or too short of the existing stem as it relates to the new parts. So, having the new stem is good to have, just in case
plaifender Posted May 28, 2010 Author Report Posted May 28, 2010 Can't find the part number for the stem. To be honest.. for some reason I thought that the stem came with the crown......
Francisco Posted May 30, 2010 Report Posted May 30, 2010 Can't find the part number for the stem. To be honest.. for some reason I thought that the stem came with the crown...... i think you can find eta 7750 stems (fully compatible) in ebay. If not, cousins' reference: VAL7750401T9 regards, Francisco
krpster Posted May 30, 2010 Report Posted May 30, 2010 The stem you need is dependent on the movement in your UPO. Chances are good it is a 2824/2836 or clone of it in which case you could use the ETA stem which is common to all. They can be had as per below. Ofrei part number 401/1029 Cousins part number ETA28012401 Or you could reach out to the community as I am sure someone probably has a spare or two knocking around in their parts box. In the end a new one is not necessary but like Ubi said it can be handy just in case.
Francisco Posted May 30, 2010 Report Posted May 30, 2010 oh!, I am wrong..I thought you were talking the chrono UPO.
FxrAndy Posted May 30, 2010 Report Posted May 30, 2010 if it is a 28xx i am sure i have a spare stem in my desk somewhere
maxman Posted May 30, 2010 Report Posted May 30, 2010 oh!, I am wrong..I thought you were talking the chrono UPO. We will forgive you this time Francisco
krpster Posted May 30, 2010 Report Posted May 30, 2010 oh!, I am wrong..I thought you were talking the chrono UPO. After I read your post I had to double check myself. No worries
plaifender Posted May 30, 2010 Author Report Posted May 30, 2010 if it is a 28xx i am sure i have a spare stem in my desk somewhere If you have a spare.. I'd love it andy! I've got a Swiss ETA 2824 (not clone). Think your stem might fit????
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now