FDG Posted July 15, 2010 Report Share Posted July 15, 2010 Hi all, Regarding the crystal problem with the PloProf, I made a inquiry at the local crystal factory. Specs: 28.80mm Ø 4,5mm thick sapphire Double side AR coating ( superb AR, from the factory that does AR for Breitling, Omega and other big brands) Due to the holidays and this being a special order, the delivery time is quite long around 8 weeks. At this moment I asked for 20 crystals, which will cost €50,- including tax The following (worldwide) shipping methods are available: - Priority airmail €3,- - Signed for (including tracking #) €11,- EU shipping would cost less. Payment options: - Paypal - Bank transfer - Cash If there is need for more then 20 crystals, price will be lower. Please let me know who has interest in these crystals, by replying to the topic or PM so I can put you on the list. List so far: Donerix Marsupilami mastrmindalliance straight-six mpp wan Targa (rwi) Hava MilSub Jakob Ezchar bkwbkw cskent69 Eunomians rustyrussel marinamm20 Dangerous9 repwatch dang99 entity Thogaa saber0606 Link to comment Share on other sites More sharing options...
Jkay Posted July 15, 2010 Report Share Posted July 15, 2010 Good Show. Can't wait to see the sample when you get one. Link to comment Share on other sites More sharing options...
txcollector Posted July 15, 2010 Report Share Posted July 15, 2010 where did you get the specs? Is the rep crystal thinner than the gen (4.9mm)? Link to comment Share on other sites More sharing options...
FDG Posted July 15, 2010 Author Report Share Posted July 15, 2010 They sent me a crystal with single AR so we can decide we want double or single @txcollector: In the Major PloProf issue topic we decided that the thickness would be 4.5mm Link to comment Share on other sites More sharing options...
krpster Posted July 15, 2010 Report Share Posted July 15, 2010 Way to go FDG! You just made every ploprof owners day! Link to comment Share on other sites More sharing options...
donerix Posted July 15, 2010 Report Share Posted July 15, 2010 I am in. Great work. Link to comment Share on other sites More sharing options...
marsupilami Posted July 15, 2010 Report Share Posted July 15, 2010 I´m in, too. You should give them a rep crystal as sample. Don´forget the bevelled edge on top. Link to comment Share on other sites More sharing options...
Merlin Posted July 15, 2010 Report Share Posted July 15, 2010 mineral or sapphire? Link to comment Share on other sites More sharing options...
mastrmindalliance Posted July 15, 2010 Report Share Posted July 15, 2010 Im in, pending a chat with offshore. Link to comment Share on other sites More sharing options...
Jkay Posted July 15, 2010 Report Share Posted July 15, 2010 It's a sapphire crystal. non-sandwich .. nice and thick. Link to comment Share on other sites More sharing options...
straight_six Posted July 15, 2010 Report Share Posted July 15, 2010 I'm in as well, Fred. Link to comment Share on other sites More sharing options...
FDG Posted July 15, 2010 Author Report Share Posted July 15, 2010 Thank you for all the replies. Will make sure the put in a bevelled edge. If one has a drawing of the crystal with bevelled edge, that would me much appreciated. @ Merlin: Sapphire 4,5mm thick. I shall also post this topic on RWI? Link to comment Share on other sites More sharing options...
Merlin Posted July 15, 2010 Report Share Posted July 15, 2010 this is a very good price, thanks Link to comment Share on other sites More sharing options...
G.Curcio Posted July 16, 2010 Report Share Posted July 16, 2010 Bravo FDG!!! I know you have just made a lot of Ploprof owners very happy! I sent mine back to China, so I wouldn't be needing a xtal now... but it's great to know they would be available. thanks for stepping up mate! Link to comment Share on other sites More sharing options...
FDG Posted July 17, 2010 Author Report Share Posted July 17, 2010 Now posted on RWI aswell, lets get 20 people together and have excellent PloProfs Link to comment Share on other sites More sharing options...
offshore Posted July 17, 2010 Report Share Posted July 17, 2010 @FDG, I today pressed a 288 mineral into the case I have here, to check that it was the correct size. It is nice and firm in the existing retainer, so I do think its the way to head. ( The 289 is just too tight!) The one I test fitted was only a 3mm MG , however I think it proved the correct diameter, as the insert only grips about 3mm anyway! I hope this is the correct direction to solve this problem.... I certainly think so. Offshore Link to comment Share on other sites More sharing options...
FDG Posted July 17, 2010 Author Report Share Posted July 17, 2010 @FDG, I today pressed a 288 mineral into the case I have here, to check that it was the correct size. It is nice and firm in the existing retainer, so I do think its the way to head. ( The 289 is just too tight!) The one I test fitted was only a 3mm MG , however I think it proved the correct diameter, as the insert only grips about 3mm anyway! I hope this is the correct direction to solve this problem.... I certainly think so. Offshore Thank you. Do you also know the angle of the bevel and the width of the bevel? Link to comment Share on other sites More sharing options...
hava Posted July 17, 2010 Report Share Posted July 17, 2010 count with me. Link to comment Share on other sites More sharing options...
offshore Posted July 18, 2010 Report Share Posted July 18, 2010 @FDG, The bevel is pretty small , something around 0.5mm, and it looks to be 45 deg, but its so small its very difficult to measure. I saw today one of the "replacement " crystals from the dealers, and it looks to me just the same as the ones which are delaminating! Certainly is the same measurements! I also pressed a 287 into the case for a comparison, and that one is certainly getting to the loose point. Also saw one of the 21J Ploprofs, the finish on the case on this one, was far inferior to the other case I have here, although without a very close inspection, it looked in all ways identical....maybe the cheaper version gets one less final polish? Have decided to try sanding the original crystal 0.1mm, and doing a reinstall/reassembly. See how that goes. O/S Link to comment Share on other sites More sharing options...
Jakob Posted July 18, 2010 Report Share Posted July 18, 2010 I'd be interested too. Link to comment Share on other sites More sharing options...
chefcook Posted July 18, 2010 Report Share Posted July 18, 2010 The genuine crystal is NOT beveled on top, it has a rounded edge. I can only estimate, but I'd say it has a 0,25 mm radius on top. See pics of my gen PloProf below. Link to comment Share on other sites More sharing options...
MilSub Posted July 18, 2010 Report Share Posted July 18, 2010 I'm in! Can't wait to get this fixed! Link to comment Share on other sites More sharing options...
mastrmindalliance Posted July 18, 2010 Report Share Posted July 18, 2010 I will take this as I have it on good authority (the horses mouth in fact) that even the 'ultimate' will indeed have the same xtal setup. Pen me in FGD, and thanks. Link to comment Share on other sites More sharing options...
ezchar Posted July 20, 2010 Report Share Posted July 20, 2010 count me in. Thanks Link to comment Share on other sites More sharing options...
FDG Posted July 20, 2010 Author Report Share Posted July 20, 2010 I received the sample yesterday. We definetly want the double AR, the single AR was pretty effective but double AR would just kill it While updating the list I noted we have 12 crystals so far, if we can make it to 30 we get extra discount. Well any crystal above 20 will give us additional discount due to the setup-fee for the machine. So gents, bring all your friends along for the best price Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now