Dizzy Posted October 7, 2010 Report Share Posted October 7, 2010 I am going to be adding an NDT dial to an ETA 2846 movement and Im going to need some dial dots. Where is a good place to order them from? I see Ofrei has them but his shipping charge is $29 to canada. Thats just rediculous. Any better place to buy them? What shape dots do i need? I see them come in round, rectangle and curved bar shape. dizz Link to comment Share on other sites More sharing options...
jmb Posted October 7, 2010 Report Share Posted October 7, 2010 I bought both "dots" and the "curved". If you are not in a really big hurry maybe somebody could add some to their next order and then mail 'em a lot cheaper than $29! I would imagine they are sending via USPS Express Mail which is pretty ridiculous... Link to comment Share on other sites More sharing options...
offshore Posted October 7, 2010 Report Share Posted October 7, 2010 You don't need "dots". They are just double sided (very strong) tape. We sell a roll of tape- 6mm wide, which can be then cut to size. http://watchbitz.com.au/store/index.php?main_page=product_info&cPath=0&products_id=260&zenid=95d72aebc298128ada921e623bf52bd0 You would do thousands of redials with this one roll. Offshore Link to comment Share on other sites More sharing options...
btocamelo Posted October 7, 2010 Report Share Posted October 7, 2010 maybe Double Sided Scotch Tape....the clear type, my wife uses it for scrap booking photos onto paper....cut the tape in whatever shape or piece you want. The key is to use a tape that has the proper thickness, not too thick so the dial is too separated from the DW. Link to comment Share on other sites More sharing options...
offshore Posted October 7, 2010 Report Share Posted October 7, 2010 maybe Double Sided Scotch Tape....the clear type, my wife uses it for scrap booking photos onto paper....cut the tape in whatever shape or piece you want. The key is to use a tape that has the proper thickness, not too thick so the dial is too separated from the DW. Agreed on DS tape (as above) however it needs to be VERY strong...I searched for quite sometime to find a tape strong enough to use. And YES, thickness is also an issue. Another method, (although frowned on by some) is to use minute dobs of silicon...just make sure none finds its way where it shouldn't be!! O/S Link to comment Share on other sites More sharing options...
Dizzy Posted October 7, 2010 Author Report Share Posted October 7, 2010 how about using GS hypo cement? Link to comment Share on other sites More sharing options...
offshore Posted October 7, 2010 Report Share Posted October 7, 2010 A bit more difficult if you ever want to remove the dial, and it, like silicon, can find its way in to areas where its not welcome! I would stay away...just get some decent D/S tape. O/S Link to comment Share on other sites More sharing options...
Dizzy Posted October 7, 2010 Author Report Share Posted October 7, 2010 I think double sided scotch tape would be too thin and weak. 3M tape would be strong but the foam kind is pretty thick. @offshore - how thick is the tape on the website? Link to comment Share on other sites More sharing options...
offshore Posted October 7, 2010 Report Share Posted October 7, 2010 @offshore - how thick is the tape on the website? Its not unlike D/S scotch tape to look at...its about .011mm. thick. ( .018mm with the cover strip on) It does have a more substantial feel than scotch tape however, its almost as if once the cover strip is peeled off, all you are left with is a glue base, with no actual tape in there. I, and some other local watchmakers have used it successfully over the last 12 months, and we have probably sold 100 rolls all over the place, and have not had one complaint or reaction. O/S Just checked the suppliers promo. Its called a 'high performance acrylic tape" Link to comment Share on other sites More sharing options...
chiman12 Posted October 7, 2010 Report Share Posted October 7, 2010 Dizzy...if you want a sheet of dial strips...send me a PM...I'm in Canada also... offshore...is your tape the same as this? If so, I'm going to pick some up! http://www.uline.ca/BL_6063/3M-F9460PC-VHB-Adhesive-Transfer-Tape Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 7, 2010 Report Share Posted October 7, 2010 ive used 3M scrapbooking tape from michaels in several builds without incident so far, ive actually had to use a hobby knife to separate it later when i wanted it off. dont worry about the dots, double side tape it to the spacer ring, the case clamps and screws will do the rest Link to comment Share on other sites More sharing options...
offshore Posted October 7, 2010 Report Share Posted October 7, 2010 Dizzy...if you want a sheet of dial strips...send me a PM...I'm in Canada also... offshore...is your tape the same as this? If so, I'm going to pick some up! http://www.uline.ca/...e-Transfer-Tape @chiman, No the one we sell is 6mm wide X 50m, and comes out of Japan. I saw a roll of it on a watchmakers bench, maybe 18 months ago, and took details of the specific brand and model, and I get it in from overseas. I'm guessing it is a "high performance" tape, not unlike that however. O/S Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now