RWG Technical Posted October 23, 2010 Report Posted October 23, 2010 Update on our A7753. Defective gear I noted during testing that turning the hands backwards resulted in skipping of the crown, the movement was disassembled to find the problem. Here's what I found, the intermediate gear was broken in two pieces, this gear connects the sliding pinion of the keyless works, to the minute gear and cannon pin. The gear was removed, and a new one installed. Problem fixed. This is the first time I have seen this gear break in two, is it a defect with the A7753? No, this gear is used in all Asian 7750's, so it's an isoloated defect, nothing more... How about that lume?? My initial impressions were wrong...sorry... I work under an extremely bright and powerful colour corrected flourscent lamp, and it can be a bit deceiving, especially when you check out lume. Initially the dial lume looked really good, but I soon realized that it's not that good, in fact it's about the same as on all reps...crappy... I lumed the dial and hands with Genuine Super Luminova C3 A+, which is the brightest and longest lasting lume available (700 minute glow time). Here you can compare the stock vs Super Lume... I have only lumed half of the dial, including half of the subdial at 6. Let me clear up some misinformation, it's been said on the forum a number of times "...no one can lume these subdials, they are too small...", while that may apply to others, it certainly doesn't apply to me. I have been luming these small subdials on the 187's for years...this subdial is no different, don't believe what you read All pics 0.5 second exposure, no trickery or long exposures. Half the dial lumed, and the subdial at 6 "2", "3", and "6" lumed More views:
FxrAndy Posted October 23, 2010 Report Posted October 23, 2010 Good work Rob, howmany of these have you serviced now then and if it is more then a few are you still of the mind that it is a decent movement?
PeteM Posted October 23, 2010 Report Posted October 23, 2010 Thanks for the update Rob Its much appreciated you taking the time
jkarpas Posted October 23, 2010 Report Posted October 23, 2010 amazing detail... you always manage to amaze us rob. Now this is tempting enough to buy one of these
RWG Technical Posted October 23, 2010 Author Report Posted October 23, 2010 Good work Rob, howmany of these have you serviced now then and if it is more then a few are you still of the mind that it is a decent movement? Because it's based on the Asian 7750 series, which we have had for over 5 years, I think it's going to be a decent movement. Only serviced 1 so far, but I have another one here for service, I'll post the results when I am done... Thanks for the positive feedback everyone.
Jkay Posted October 23, 2010 Report Posted October 23, 2010 Rob - thanks for the updates and interesting technical notes ~ you used to have a mosaic of your finest lume work posted as a single large photo. You deleted this perhaps a year ago, and I was wondering if you still have the original to re-post? It had Crazy Hours dials, Slevin bezels .. all kinds of eye popping goodness.
w0lf Posted October 23, 2010 Report Posted October 23, 2010 Wow, what a dramatic difference, and the glow color looks very gen-like! Amazing job on the 6 o'clock subdial
RWG Technical Posted October 23, 2010 Author Report Posted October 23, 2010 you used to have a mosaic of your finest lume work posted as a single large photo. Is this what your thinking of? w0lf, it looks much better, being re-tested after assembly...
fred123 Posted October 23, 2010 Report Posted October 23, 2010 I had to pop over here over w0lfie commented on the site of which I am a full-time member. This lume job is outstanding!
JoJo35 Posted October 23, 2010 Report Posted October 23, 2010 Great write-up RG, your technical explanations and photographs are always a pleasure to see here on the forum. Details like this are never seen on the gen forums. Thanks for taking the time to share this info with our membership.
Jkay Posted October 23, 2010 Report Posted October 23, 2010 Is this what your thinking of? That's the one. This should be your business card!
Drulee Posted October 23, 2010 Report Posted October 23, 2010 That's what I love to see, the beautiful Ziggie lume work Rob, have you always been luming the subdial at "6" on the 250s people send you? I just ask because you forgot to on the one I had sent you last year. No big deal, I sold it ages ago and got an ETA7753 250 with everything lumed to replace it. I was just curious if it something that you are just starting to do now.
Drulee Posted October 24, 2010 Report Posted October 24, 2010 Also, what is the big chunk of Rodico being used for in that pic?
w0lf Posted October 24, 2010 Report Posted October 24, 2010 Doc, I think the rodico is holding the dismantled munute hand over the dial to show the contrast of lumed vs unlumed hour hand.
Drulee Posted October 24, 2010 Report Posted October 24, 2010 Doc, I think the rodico is holding the dismantled munute hand over the dial to show the contrast of lumed vs unlumed hour hand. Ah, yes you are right.
Watchmeister Posted October 24, 2010 Report Posted October 24, 2010 Great stuff. I love that lume mosaic.:thumbsupsmileyanim:And yes Ziggy has been doing a remarkable job on the Daylights since thy first came out.
coolfire Posted October 24, 2010 Report Posted October 24, 2010 Nobody, I say again, NOBODY does lume like The Zigmeister does! :notworthy:
oberblender Posted October 26, 2010 Report Posted October 26, 2010 it's just such a pity that you are not in the EU, The Zigmeister! Great work, as always!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now