prdubis Posted January 16, 2011 Report Share Posted January 16, 2011 Hi there, As it is a recurrent question, I thought it might be great to list and update regularly where to source the best parts for a preV project. What do you think about it? Parts are listed from best to worst. If you want to modify the list, do it, it's just a starter and experts are welcome to update it CASE: JF, 111J, EL, Old Helenarou, Jackson Tse, Getat, DSN DIAL: FGD, DSN HANDS: FGD, DSN CRYSTAL: BigCrown, DSN CG: LH, TB/WSO, DSN CROWN: T48, PALP CASEBACK:Jakob, DSN BUCKLES: Rolexfinder STRAPS: Frogman, MMX Quote Link to comment Share on other sites More sharing options...
mir36 Posted January 17, 2011 Report Share Posted January 17, 2011 (edited) My 2 cents, best value for money: CASE: Only for a 201a/202a/203a, DSN PreV case with single-side screw in lug. Then drill the holes for the PreV double-sided screw bars yourself. From the pics I've seen, the 205a and 218a don't seem to have the fat lugs. DIAL: FGD. There is no substitute. HANDS: FGD v2 hands, FGD v1, Helenarou PreV CRYSTAL: JacksonTse for some height, DSN CG: TB with some shaping STRAPS: Simona PAV Edited January 17, 2011 by mir36 Quote Link to comment Share on other sites More sharing options...
oki Posted January 18, 2011 Report Share Posted January 18, 2011 Hi there, As it is a recurrent question, I thought it might be great to list and update regularly where to source the best parts for a preV project. What do you think about it? Parts are listed from best to worst. If you want to modify the list, do it, it's just a starter and experts are welcome to update it CASE: JF, 111J, EL, Old Helenarou, Jackson Tse, Getat, DSN DIAL: FGD, DSN HANDS: FGD, DSN CRYSTAL: BigCrown, DSN CG: LH, TB/WSO, DSN CROWN: T48, PALP CASEBACK:Jakob, DSN BUCKLES: Rolexfinder STRAPS: Frogman, MMX The rolexfinder´s 1:1 buckle is for Pre-a, or has it for pre-v too? Quote Link to comment Share on other sites More sharing options...
dlots Posted February 5, 2011 Report Share Posted February 5, 2011 Regarding shaping the CG, what exactly would be needed...? Quote Link to comment Share on other sites More sharing options...
jitai Posted February 5, 2011 Report Share Posted February 5, 2011 I tried Takashi's (aka 2geeks) sapphire crystal for my Pre-As and am quite please with the result. Not forgetting to mention that his asking price is rather reasonable. Here's the pic ... For 44mm crystal, I think Takashi's crystal is recommended. CASE: JF, 111J, EL, Old Helenarou, Jackson Tse, Getat, DSN DIAL: FGD, DSN HANDS: FGD, DSN CRYSTAL: BigCrown, Takashi (aka 2geeks), DSN CG: LH, TB/WSO, DSN CROWN: T48, PALP CASEBACK:Jakob, DSN BUCKLES: Rolexfinder STRAPS: Frogman, MMX Quote Link to comment Share on other sites More sharing options...
prdubis Posted February 5, 2011 Author Report Share Posted February 5, 2011 Taka crystal has AR, no? Sent from my GT-P1000 using Tapatalk Quote Link to comment Share on other sites More sharing options...
jitai Posted February 6, 2011 Report Share Posted February 6, 2011 Taka crystal has AR, no? Sent from my GT-P1000 using Tapatalk You can requst for non AR. Quote Link to comment Share on other sites More sharing options...
flex Posted February 6, 2011 Report Share Posted February 6, 2011 For pre-V, I would not waste a Jimmy Fu case.. They are great for A-F series build. Jackson has strap dimple, so another No No. Here are some pics of the gen.. Quote Link to comment Share on other sites More sharing options...
mir36 Posted February 6, 2011 Report Share Posted February 6, 2011 Awesome gen case pics flex. Thanks for sharing these. Quote Link to comment Share on other sites More sharing options...
Cachet Posted February 6, 2011 Report Share Posted February 6, 2011 flex, thank you for the very nice gen-pics! Can you tell me from which pre-V watch they are? Quote Link to comment Share on other sites More sharing options...
dlots Posted February 6, 2011 Report Share Posted February 6, 2011 (edited) Excellent pictures! Looks like I will need to shape the upper corners on my DNS case... They are much more rounded on these pictures? Edited February 6, 2011 by dlots Quote Link to comment Share on other sites More sharing options...
flex Posted February 7, 2011 Report Share Posted February 7, 2011 The pre-V lugs are more rounded and there is no strap dimple between the lugs (like my EL) Quote Link to comment Share on other sites More sharing options...
swat_nong Posted February 8, 2011 Report Share Posted February 8, 2011 Hi, Does the case of new PAM 005K good for Pre-V? Quote Link to comment Share on other sites More sharing options...
kimerathon1 Posted February 9, 2011 Report Share Posted February 9, 2011 (edited) Ok so here is a great answer for you: Jimmy Fu cases are incorrect for PreV, they have long shaped Lugs, which are corect for A-F series, not PreV, EL and the 111j Case are the best out there, but I have to say, 111J is better because the bezel height is incorrect on the EL case (it is a little thicker) and you don't need to play with it. However, the 111J case needs to be reshaped a little, here is mine with a little reshaping: Also the Crown I am using is a T48, however, PreV pam crowns are a little thicker, so a Palp crown would be your best bet! So your list would have to look like this CASE: 111J reshaped, EL, Old Helenarou,(Eliminate the others here please!) DIAL: FGD, DSN HANDS: FGD, DSN CRYSTAL: BigCrown, Cartel 177, 219 or 005k crystal, DSN's is still foggy, and not OEM thickness! CG: LH, V, TB/WSO, (Eliminate DSN CG please) CROWN: PALP, T48 CASEBACK:Jakob, DSN BUCKLES: Rolexfinder (he no longer makes PreV, but you can source them around) STRAPS: Dirk, MP Pav90 There you go! Edited February 9, 2011 by kimerathon1 Quote Link to comment Share on other sites More sharing options...
swat_nong Posted February 10, 2011 Report Share Posted February 10, 2011 Hi kimerathon1, What is "the 111J case needs to be reshaped a little"? At the lug or the case-tube ? Quote Link to comment Share on other sites More sharing options...
kimerathon1 Posted February 10, 2011 Report Share Posted February 10, 2011 You need to file the lugs down for them to look fatter, shorter and stubbier, didn't take pictures of the before reshaping, but I took off like almost 1mm off each lug to make it look like this! Quote Link to comment Share on other sites More sharing options...
gianton Posted February 11, 2011 Report Share Posted February 11, 2011 You need to file the lugs down for them to look fatter, shorter and stubbier, didn't take pictures of the before reshaping, but I took off like almost 1mm off each lug to make it look like this! Have you changed the hex tube to a round one? Quote Link to comment Share on other sites More sharing options...
capice Posted February 11, 2011 Report Share Posted February 11, 2011 great info guys Quote Link to comment Share on other sites More sharing options...
kimerathon1 Posted February 11, 2011 Report Share Posted February 11, 2011 (edited) Have you changed the hex tube to a round one? Yes sir, not changed, but I used a Dremel and a grinder to remove the hex shape and make it round, also it needs to be reworked so it can fit a T48 crown, so quite a bit needs to be taken off so it could fit. Ultimately, a custom tube has to be made for it to fit a T48 crown properly, DSN crown tubes are to small for the 111j case tube hole. And the Neck of the T48's are too small for the 111J crown tube, but with patience, you can make it fit properly, but to date, this is the best PreV case, considering a EL case is hard to find, and not to mention a Premium to pay for one (think 500USD+)!!! Compare the look: Gen (used the above pic) And mine Edited February 11, 2011 by kimerathon1 Quote Link to comment Share on other sites More sharing options...
flex Posted February 12, 2011 Report Share Posted February 12, 2011 Nice.. the above are my EL Quote Link to comment Share on other sites More sharing options...
kimerathon1 Posted February 15, 2011 Report Share Posted February 15, 2011 Just found out something, the 111J and the EL have to sharp edges on the pillow case (where the lugs meet the case) these need to be rounded out and reshaped as well, already did that reshaping and I am really satisfied with the results, so I will post pictures of that later on! Quote Link to comment Share on other sites More sharing options...
z3k0 Posted February 15, 2011 Report Share Posted February 15, 2011 I would just add: CG: V,LH,TB/WSO/Sead regards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.