panerai153 Posted January 30, 2011 Report Posted January 30, 2011 Contemplating another project (I really need psychiatric help!!) maybe a Tudor Big crown or a 6538. i was wondering about the crowns, it looks like there are several on the market, Yuki,NDT, maybe others. Who has the best, most accurate crown?
donerix Posted January 30, 2011 Report Posted January 30, 2011 I bought this and I am quite happy with it (tube and crown): Brevet Crown PS: I offered $95 and got it
mjmj Posted January 30, 2011 Report Posted January 30, 2011 I bought this and I am quite happy with it (tube and crown): Brevet Crown PS: I offered $95 and got it +1 . I followed Donerix's advice and picked one up for USD100 delivered to Australia. Looks pretty good
forrestal Posted February 1, 2011 Report Posted February 1, 2011 +1 . I followed Donerix's advice and picked one up for USD100 delivered to Australia. Looks pretty good + 1. It is the same of NTD
ubiquitous Posted February 1, 2011 Report Posted February 1, 2011 Not really relevant to the discussion, but this particular image in the auction listing made me ROFL...
donerix Posted February 1, 2011 Report Posted February 1, 2011 Does anybody know what size tap to use for this crown?
freddy333 Posted February 1, 2011 Report Posted February 1, 2011 + 1. It is the same of NTD It IS NTD. NDtrading = Natalie's Passion = np0234. All same.
alligoat Posted February 1, 2011 Report Posted February 1, 2011 Does anybody know what size tap to use for this crown? Boy, you sure have to hope it's the 3.0mm x .35 tap which is standard for all of the 6mm and 7mm tubes.
donerix Posted February 2, 2011 Report Posted February 2, 2011 I have been looking around for this tap. Any recommendation where I can buy it?
mastergod Posted February 2, 2011 Report Posted February 2, 2011 I bought this and I am quite happy with it (tube and crown): Brevet Crown PS: I offered $95 and got it Looks good!
aeromatic Posted February 2, 2011 Report Posted February 2, 2011 I was just goin to post a request for a new Brevet crown and tube But this post saved me the trouble my 6538 brevet crown and tube is screwed (please excuse the pun! i was wondering from where to get a replacement too . i saw somewhere some for sale for 30 usd but cant remember where ,i cant imagine that at that price they would be any good im a bit [censored] that after a year of owning my 6538 i have to replace my crown and tube but there you go! hope i can find a good one for a lot less than the 280usd iv been quoted Aero!
panerai153 Posted February 2, 2011 Author Report Posted February 2, 2011 I bought one from NP trading (Natalie's Passion) on Ebay. buy it Now is 150.00. I took donerix's advice offered 95.00 USD and got it. I'll post a few photos when it gets here.
aeromatic Posted February 2, 2011 Report Posted February 2, 2011 I bought one from NP trading (Natalie's Passion) on Ebay. buy it Now is 150.00. I took donerix's advice offered 95.00 USD and got it. I'll post a few photos when it gets here. just been on there they quoted me 37usd for shipping to my country photos look good 95 usd seems reasonable.
ubiquitous Posted February 2, 2011 Report Posted February 2, 2011 Boy, you sure have to hope it's the 3.0mm x .35 tap which is standard for all of the 6mm and 7mm tubes. There's no way that the tube for this thing is going to be the same diameter as a standard 7030. The stem is the usual tap 10 size... And look how big the barrel is around the base for the stem. Compare to a 7mm: Granted, the pic is of an aftermarket 702, the sizes are the same as gen...
donerix Posted February 2, 2011 Report Posted February 2, 2011 I will go and measure mine now .... 3.95mm diameter and 3.5mm for 10 rings of the thread. So I am assuming you need a 4.0mm 0.35 tap Experts can you please confirm that and maybe also tell us: WHERE WE CAN BUY IT
Jimster Posted February 3, 2011 Report Posted February 3, 2011 If I recall correctly it's a Tap 7 which should be 1.2mm Oops - i thought you were talking stem size.
JoeyB Posted February 3, 2011 Report Posted February 3, 2011 The 7mm Rolex Brevet Crown tube I got from Davidsen measures 3.8mm.
donerix Posted February 18, 2011 Report Posted February 18, 2011 Went tap hunting today and found the 3mmx.35 and the 4mmx.35 (for the 8mm crown, I took it with me and had them measure it), I found them at Dewitt Tools, 6550 NW 72nd Avenue, Miami, 305-8881450.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now