Jkay Posted June 8, 2012 Report Share Posted June 8, 2012 A couple of bubbles at the crown... Should I be worried? No. That bubble is air trapped under the crown, not from inside the watch. If the watch leaks, there will be no "maybe" question. It will be a shower of bubbles. Link to comment Share on other sites More sharing options...
danielv2000 Posted June 8, 2012 Report Share Posted June 8, 2012 No. That bubble is air trapped under the crown, not from inside the watch. If the watch leaks, there will be no "maybe" question. It will be a shower of bubbles. Ok. Thanks Link to comment Share on other sites More sharing options...
mastersdom Posted July 6, 2012 Report Share Posted July 6, 2012 I've been looking into this. Whilst "10m" kind of implies it'll be fine to have a bath with, or to go to the swimming pool, it's probably not. The movement of your hands swimming and hitting the water means it's not static. I think 3-5 ATM is what you'd need to feel safe doing a bit of swimming in it, and definitely more if you're a diver. It's an old myth about the movement in water. You would need to move your arm at about 32mph to add 1atm of pressure. If your watch tests out at 3atm you can swim in it. However if it says 3atm on the back then don't risk it as it may not be that water resistant and there is little margin for error. Link to comment Share on other sites More sharing options...
TheRelumer Posted July 7, 2012 Report Share Posted July 7, 2012 video link on previous page does not work , it redirects me to rwg.cc Link to comment Share on other sites More sharing options...
epilan Posted August 2, 2012 Report Share Posted August 2, 2012 Nice post! Thanks. Link to comment Share on other sites More sharing options...
van_damme1988 Posted September 19, 2012 Report Share Posted September 19, 2012 Nice post. Maybe I would add something for lazy-to-read people like me Breitling site will help http://www.breitling.com/en/service/index.php?idIndex=87353 Link to comment Share on other sites More sharing options...
panermaniac Posted September 12, 2013 Report Share Posted September 12, 2013 how do i do that ? I saw this on your site "Please note , ETA clone movements or other low quality replica movements will not be accepted. Watches with those movements are only qualified for relume jobs" You might need to reconsider that if you want to do well here. OP - great post! Link to comment Share on other sites More sharing options...
Chrononna Posted October 9, 2013 Report Share Posted October 9, 2013 wow, such a great collection, and very interesting testing!! Link to comment Share on other sites More sharing options...
theoanast Posted October 16, 2013 Report Share Posted October 16, 2013 hello, can you suggest me buy a chopard migle millia GMT with genuie 7750 valjoux movement ? I appreciate your help thank you Theo Link to comment Share on other sites More sharing options...
theoanast Posted October 16, 2013 Report Share Posted October 16, 2013 hello, can you suggest me buy a chopard migle millia GMT with genuie 7750 valjoux movement ? I appreciate your help thank you Please write direct to my email < theoanast@hotmail.com> Theo Link to comment Share on other sites More sharing options...
Pepeu Posted October 27, 2013 Report Share Posted October 27, 2013 Excellent article Link to comment Share on other sites More sharing options...
Guest ppreplicawatch Posted November 9, 2013 Report Share Posted November 9, 2013 Good, thanks for sharing. Link to comment Share on other sites More sharing options...
sckim0687 Posted November 17, 2013 Report Share Posted November 17, 2013 Thanks for the good info. Link to comment Share on other sites More sharing options...
madboy007 Posted November 25, 2013 Report Share Posted November 25, 2013 nice,i just wanna buy a new waterproof watch to match my clothes Link to comment Share on other sites More sharing options...
Jkay Posted November 28, 2013 Report Share Posted November 28, 2013 nice,i just wanna buy a new waterproof watch to match my clothes Welcome to the forum. Did you have a brand in mind? How about a size? Link to comment Share on other sites More sharing options...
SSTEEL Posted November 28, 2013 Report Share Posted November 28, 2013 nice,i just wanna buy a new waterproof watch to match my clothes Wet suit? Link to comment Share on other sites More sharing options...
Horophile Posted December 3, 2013 Report Share Posted December 3, 2013 First thread i've read on RWG and I have to say, excellent, excellent thread! Very informative and I (was) under the impression that all replicas were incapable of being resistant to water and different pressures.. Thanks for the info! Link to comment Share on other sites More sharing options...
Jkay Posted December 3, 2013 Report Share Posted December 3, 2013 I (was) under the impression that all replicas were incapable of being resistant to water and different pressures.. Thanks for the info! A decent quality replica diver's watch is made of solid stainless steel. As long as the watch assembly worker remembered to install the gaskets, you are good to go. 1 Link to comment Share on other sites More sharing options...
share2jason Posted December 10, 2013 Report Share Posted December 10, 2013 where can i get the testing machine? I just bought the the cheap multifunctional watch, i also want to test how many meters for the water resistance. Link to comment Share on other sites More sharing options...
sge1991 Posted December 28, 2013 Report Share Posted December 28, 2013 very helpful! Link to comment Share on other sites More sharing options...
danielkarpathios Posted December 29, 2013 Report Share Posted December 29, 2013 Great article and your collection is insane! Link to comment Share on other sites More sharing options...
J.S. Posted January 1, 2014 Report Share Posted January 1, 2014 Excellent article, awesome collection and link to a good reading "Blue Hole". Link to comment Share on other sites More sharing options...
GenTLe Posted June 16, 2014 Report Share Posted June 16, 2014 To the OP TJGladeRaider: thanks for this post, I always wanted to get how the water proof quality of a watch is measured. I thought through some very sensitive manometer but definitivelly I didn't think about something that immediate like looking for bubbles (mainly because I didn't think about putting the watch in water AFTER putting pressure in the case, only way not to fill it with water if it's not properly waterproof) your're now stimulating my other hobby ("do-it-by-yourself") to see if I can build up a tool like that by my own I think the tricky part is the watch suspender mechanism, which should be pressure proof... The rest shouldn't be that complicated to build, using a simple bike pump (or my 50 liters belt compressor) as pumping engine. One question from my side: which kind of pressures a direct tap water stream can produce? I'm thinking about when I wash my hands in the sink, or taking a shower... I know that it can be quite a strong pressure but not imagining how much. Thanks again :-) Link to comment Share on other sites More sharing options...
Jkay Posted June 17, 2014 Report Share Posted June 17, 2014 Link to comment Share on other sites More sharing options...
Jkay Posted June 17, 2014 Report Share Posted June 17, 2014 One question from my side: which kind of pressures a direct tap water stream can produce? I'm thinking about when I wash my hands in the sink, or taking a shower... I know that it can be quite a strong pressure but not imagining how much. Thanks again :-) A good way to tell if the back of your watch is waterproof is to sleep with the watch on, with your hand under the blankets with your body. The moist air will easily enter the watch through any weakness. The next day, place the watch inside your refrigerator for a short time .. 30 minutes? .. and if water vapor is inside the watch, the crystal will have fogged slightly. Link to comment Share on other sites More sharing options...
Recommended Posts