tessa Posted May 20, 2011 Report Share Posted May 20, 2011 will the swiss 6497 movement fit the 005k? im going to change the movement but is this the movement i should change or would it be better with another swiss movement? Link to comment Share on other sites More sharing options...
Cats Posted May 20, 2011 Report Share Posted May 20, 2011 No prob IMO Carpe Diem Cats Link to comment Share on other sites More sharing options...
Whatever123 Posted May 20, 2011 Report Share Posted May 20, 2011 Yes, no problem - FxrAndy installed a gen Unitas in my 005K two weeks ago. Link to comment Share on other sites More sharing options...
tessa Posted May 20, 2011 Author Report Share Posted May 20, 2011 Yes, no problem - FxrAndy installed a gen Unitas in my 005K two weeks ago. thanks i will do Link to comment Share on other sites More sharing options...
sonicpath Posted May 21, 2011 Report Share Posted May 21, 2011 only problem is the Swiss only a low-beat not like Gen(hi-beat)...will tell when the sec hand sweeps. Link to comment Share on other sites More sharing options...
gianton Posted May 21, 2011 Report Share Posted May 21, 2011 I had mine changed to a high beat A6497-2 Seagull movement, working great +5 secs/day and very quiet! Link to comment Share on other sites More sharing options...
ussr Posted May 21, 2011 Report Share Posted May 21, 2011 Had mine swapped today! Will compare with low beat when home... Link to comment Share on other sites More sharing options...
Whatever123 Posted May 21, 2011 Report Share Posted May 21, 2011 only problem is the Swiss only a low-beat not like Gen(hi-beat)...will tell when the sec hand sweeps. I don't think that's a big issue - the seconds subdial is so small you hardly see the second hand anyway. No one will notice except you put a gen next to it. Link to comment Share on other sites More sharing options...
Polynomial Posted May 21, 2011 Report Share Posted May 21, 2011 What about the CP? Is the out-of-the-box ETA CP long enough? Link to comment Share on other sites More sharing options...
Whatever123 Posted May 21, 2011 Report Share Posted May 21, 2011 What about the CP? Is the out-of-the-box ETA CP long enough? No, afaik you need an H3 CP. Link to comment Share on other sites More sharing options...
tessa Posted May 22, 2011 Author Report Share Posted May 22, 2011 Does anybody know were you could by an eta 6847-2 ? Link to comment Share on other sites More sharing options...
bwhitesox Posted May 22, 2011 Report Share Posted May 22, 2011 (edited) Tessa that movement ( Presume you mean 6497-2 )will set you back $500 plus dollars...Best to go for the high beat seagull. Edited May 22, 2011 by bwhitesox Link to comment Share on other sites More sharing options...
tessa Posted May 22, 2011 Author Report Share Posted May 22, 2011 Tessa that movement ( Presume you mean 6497-2 )will set you back $500 plus dollars...Best to go for the high beat seagull. And where do you buy seagull? Link to comment Share on other sites More sharing options...
gianton Posted May 22, 2011 Report Share Posted May 22, 2011 And where do you buy seagull? Here mate http://www.helenarou.com/6497-mechanical-watch-movement-for-44mm-45mm-47mm-649744454717.html I bought two of those and my watchsmith put them on my 005K & 026K Link to comment Share on other sites More sharing options...
tessa Posted May 22, 2011 Author Report Share Posted May 22, 2011 Here mate http://www.helenarou.com/6497-mechanical-watch-movement-for-44mm-45mm-47mm-649744454717.html I bought two of those and my watchsmith put them on my 005K & 026K Is that high beat mov? Link to comment Share on other sites More sharing options...
gianton Posted May 22, 2011 Report Share Posted May 22, 2011 Is that high beat mov? Correct, high beat A6497-2 from Seagull factory. H3 high cannon pinion set is included. Link to comment Share on other sites More sharing options...
Jkay Posted May 22, 2011 Report Share Posted May 22, 2011 Im curious why people are swapping the movement in a new watch. Is something wrong with the one that comes with this new rep? Link to comment Share on other sites More sharing options...
gianton Posted May 22, 2011 Report Share Posted May 22, 2011 Because the movement that comes from the H-factory is very noisy. A plus is the smooth swipping of the seconds hand too. Link to comment Share on other sites More sharing options...
Jkay Posted May 22, 2011 Report Share Posted May 22, 2011 Thank you for that info Link to comment Share on other sites More sharing options...
tessa Posted May 23, 2011 Author Report Share Posted May 23, 2011 Here mate http://www.helenarou.com/6497-mechanical-watch-movement-for-44mm-45mm-47mm-649744454717.html I bought two of those and my watchsmith put them on my 005K & 026K trusted dealer? Not very well informed site. Link to comment Share on other sites More sharing options...
Whatever123 Posted May 23, 2011 Report Share Posted May 23, 2011 trusted dealer? Not very well informed site. Not a trusted dealer here but they're OK. I bought from them a couple of times from the shop and from eBay. Link to comment Share on other sites More sharing options...
tessa Posted May 23, 2011 Author Report Share Posted May 23, 2011 (edited) Somebody who sells eta 6497 with CDG (Cotes de Geneva plates) . I see that some pam's on the forum has an eta with these bridges. Where do they get them ???I really want to buy on for my 111j Edited May 23, 2011 by tessa Link to comment Share on other sites More sharing options...
Cats Posted May 23, 2011 Report Share Posted May 23, 2011 Never had any problems with this seller personally. Can't remember any post telling otherwise. Carpe Diem Cats Link to comment Share on other sites More sharing options...
Cats Posted May 23, 2011 Report Share Posted May 23, 2011 Never had any problems with this seller personally. Can't remember any post telling otherwise. Carpe Diem Cats Link to comment Share on other sites More sharing options...
mambo Posted May 23, 2011 Report Share Posted May 23, 2011 I bought my high-beat movement from getat ... http://www.siswatch727.com/showroom/model/T0165/templateProductDetails.do?ParentId=1240797174312004223¤tPage=1&editCurrentLanguage=1239717806671017347&webId=1239717806671017346&productId=1242292509609011170 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now