Ephry73 Posted July 15, 2011 Report Posted July 15, 2011 Cool. I purchased an Ofrei replacement T-19 for the 1665 case and because of the case that I could not use the gasket setup, but the GS, retainer ring and she's tighter than a mule(don't ask ) I wonder(Ronin) since you have been great at providing my inquiring brain with loads of great information, where I can get the correct retainer ring, friction ring and bezel setup, or how can I dup it? So far I'm pretty happy with the setup I got from Trevor, and though I had to modify a few things, it's not bad for the money at all. Thanks E
Jkay Posted July 16, 2011 Report Posted July 16, 2011 The take-away here is that each replica can be waterproof or it can leak and fail. You should always check. Your $500 super wonder modded watch could have a missing gasket, thru a freak forgetful accident. You can't know until you check.
highoeyazmuhudee Posted July 16, 2011 Report Posted July 16, 2011 in practice it is taught by Rolex to use the green loctite on the tubes, i personally use the blue as does many watchmakers.
Dizzy Posted July 17, 2011 Report Posted July 17, 2011 I use GS hypo cement on my tubes. Seals it and keeps it in place.
1680 Posted July 17, 2011 Report Posted July 17, 2011 Ronin, can you please tell me more about this gorgeous 1665 ? Thanks!
Jkay Posted July 17, 2011 Report Posted July 17, 2011 Ronin, can you please tell me more about this gorgeous 1665 ? Thanks! Use Search and look for "Ronin's Rail" ..... on second thought I have that thread bookmarked in my browser. Go HERE
ubiquitous Posted July 17, 2011 Report Posted July 17, 2011 No need for epoxy or glue... After a cool down in the ice box... No condensation under the crystal...
urbanshogun Posted July 20, 2011 Report Posted July 20, 2011 i think the problem with these mbw/k cases and copies thereof are the hev valve that needs to be marine epoxied shut. at least this is the problem on my 1665.
highoeyazmuhudee Posted July 20, 2011 Report Posted July 20, 2011 the mbk one is engrave, so it has no opening to the outside world
ubiquitous Posted July 20, 2011 Report Posted July 20, 2011 No need for epoxy in the valve either... Just well lubricated seals, and proper tension on the spring...
Ephry73 Posted October 29, 2011 Report Posted October 29, 2011 Speaking of water proof, what is the 6263's WR rating? E
freddy333 Posted October 29, 2011 Report Posted October 29, 2011 Speaking of water proof, what is the 6263's WR rating? Depends on which crown is fitted & the condition of the crystal & seals, but I believe Rolex sports watches, unless otherwise specified, are spec'd to 100m.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now