1680 Posted August 1, 2011 Report Posted August 1, 2011 Hello, finally I got my NOS vintage 703 today Now the question is how can I remove the stem from the old crown without damaging the stem. Should I heat the stem carefully with a lighter? Thanks!
prdubis Posted August 1, 2011 Report Posted August 1, 2011 Just hold the stem with flat pliers and unscrew the crown... Sent from my GT-P1000 using Tapatalk
danza1812 Posted August 1, 2011 Report Posted August 1, 2011 Is the gen crown a straight swap onto an eta stem, or does the stem need to be cut to length? Thanks.
dutchguy2 Posted August 1, 2011 Report Posted August 1, 2011 Just hold the stem with flat pliers and unscrew the crown... Sent from my GT-P1000 using Tapatalk That is how I do it all the time.
blix Posted August 1, 2011 Report Posted August 1, 2011 I've also had success using my teeth. Although, pliers would be my first choice.
alligoat Posted August 1, 2011 Report Posted August 1, 2011 Sometimes the stem is glued into the rep crown and a little heat will help at that point. Just don't burn your fingers!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now