username here Posted August 1, 2011 Report Share Posted August 1, 2011 I've got two gen inserts- neither will work on my MBW case: Gen insert measurement: inside Diameter -- 30.70 mm Outside Diameter - 37.57 mm MBW case: This is an older MBW 'Polex' 5513 case. in bezel for insert has a diameter of 36.6mm The crystal Outside Diameter is around 30mm From these measurements it looks like the diameter of the insert is over 1mm too large and the inside diameter is enough oversize that there would be an unsightly gap between crystal and insert. Has anybody else run into this problem when modding an MBW? Possible solutions? Link to comment Share on other sites More sharing options...
alligoat Posted August 1, 2011 Report Share Posted August 1, 2011 You've got the wrong inserts! The 5513 insert is smaller and the ones you have are the 16800/16610 inserts. The 315-5513 will fit the 5513/5512/1680/1665 watches and the 315-16800 is for the later model sapphire date subs. There's also different inserts for the 14060 and the 16660/16600 SD's. Link to comment Share on other sites More sharing options...
praetor Posted August 1, 2011 Report Share Posted August 1, 2011 ^ ditto... the size you're looking for is 36.6 outside and 30.3 on the inside. My 5513 case fits a 16800 insert though hahahha =D that's what I get for buying cheap. Link to comment Share on other sites More sharing options...
username here Posted August 2, 2011 Author Report Share Posted August 2, 2011 Thanks. if anybody has the correct insert- i've got 2 16800's to sell! Also have a gen 7mm crown, gen DJ gold crown (came out of a 16223), gen DJ dial- prob a few other things that I could trade for the correct movement. LMK! Link to comment Share on other sites More sharing options...
woof* Posted August 2, 2011 Report Share Posted August 2, 2011 The smaller gen 5512/1680 inserts are usually more $ and harder to come by in good condition than the modern saphire inserts Keep checking VRF and eBay ..good luck! Link to comment Share on other sites More sharing options...
freddy333 Posted August 2, 2011 Report Share Posted August 2, 2011 Get 1 of these. Link to comment Share on other sites More sharing options...
username here Posted August 2, 2011 Author Report Share Posted August 2, 2011 what does everybody use normally for a franken 1680 with an MBW base? Link to comment Share on other sites More sharing options...
praetor Posted August 2, 2011 Report Share Posted August 2, 2011 ^ whatever you can afford. My PT 1665 so far has: - gen service T39 - gen 702 crown & tube - gen spring bars - gen mk1 fat font insert cost in parts so foar ~$270 -300 ish go insane!! Link to comment Share on other sites More sharing options...
Jimster Posted August 2, 2011 Report Share Posted August 2, 2011 Get 1 of these. Out of stock. I need one for my 1680. Link to comment Share on other sites More sharing options...
username here Posted August 2, 2011 Author Report Share Posted August 2, 2011 i just purchased a gen 5513 insert. Holding my breath hoping it will fit. My final build will have MBW case gen insert Gen 127 Gen crown ubi DW yuki dial/hands (vintage relume) gen 91350 w/ 580 end piece i think it MIGHT be finished! Link to comment Share on other sites More sharing options...
danza1812 Posted August 2, 2011 Report Share Posted August 2, 2011 i just purchased a gen 5513 insert. Holding my breath hoping it will fit. My final build will have MBW case gen insert Gen 127 Gen crown ubi DW yuki dial/hands (vintage relume) gen 91350 w/ 580 end piece i think it MIGHT be finished! Cant wait to see it! Link to comment Share on other sites More sharing options...
panerai153 Posted August 2, 2011 Report Share Posted August 2, 2011 what does everybody use normally for a franken 1680 with an MBW base? Mine has a genuine 1680 w/ tritium pearl. bought it off the VRF a couple of years ago. Fits the old MBW bezel fine. Link to comment Share on other sites More sharing options...
username here Posted August 2, 2011 Author Report Share Posted August 2, 2011 Mine has a genuine 1680 w/ tritium pearl. bought it off the VRF a couple of years ago. Fits the old MBW bezel fine. yeah- it's probably the smaller size- they apparently fit fine. Just purchased a new insert- we'll see. The DW is having some issues- it's a ubi DW and not quite flat. I'm going to have it glued onto the ETA DW as an overlay. Should i be worried? Link to comment Share on other sites More sharing options...
praetor Posted August 2, 2011 Report Share Posted August 2, 2011 (edited) Rolex Insert Sizes (for future reference =D)hmm, can't keep the formatting but watever Old Sub ////// New Sub 315-5513 5513 5512 1665 1680 9401 //// 315-16808-81 16808 / 16618 Outside Diameter: 36.55mm ////Outside Diameter: 37.65mm Inside Diameter: 30.3mm ////Inside Diameter: 30.7mm Old GMT New GMT 315-16750-1 16750 / 1675 /1670 315-16700-1 //// 16700 315-16753-1 16753 GOLD //// 315-16760-7 16760 / 16710 Outside Diameter: 37.75mm //// Outside Diameter: 37.65mm Inside Diameter: 30.2mm //// Inside Diameter: 30.7mm New Style Sub no date //// New Sea Dweller 14060 //// 16660 Outside Diameter: 36.55mm ///// Outside Diameter: 36.65 Inside Diameter: 29.7mm ///// Inside Diameter: 29.70mm Edited August 2, 2011 by praetor Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now