senator Posted August 4, 2011 Report Posted August 4, 2011 and works great without glue & others. Waterproof, the same as shipped from Joshua!! relumed with reworked bezelpearl!
Watchmeister Posted August 4, 2011 Report Posted August 4, 2011 Can't tell what you did as I am not familiar with the pusher and the socket. Were the male and female ends already threaded or it was just contact based and you threaded it? In any case if it is a real fix I am excited as I had avoided buying this one over concern on the defect. Otherwise I love the watch.
burnz Posted August 4, 2011 Report Posted August 4, 2011 What did you do with the pearl? Looks like he shaved off a bit of the pearl around the border, thus making it look smaller and slightly sunken as per gen. Sent from my iPad using Tapatalk
Jkay Posted August 6, 2011 Report Posted August 6, 2011 Yes, please explain what you did to permanently fix this error?
sul Posted August 6, 2011 Report Posted August 6, 2011 (edited) Don`t really know what you did but your work seems to be high quality edit: ok, I got it, screw would not come fully out any more, it is fixed from inside, but pusher will still work. Clever , but this mod need some special tools. Edited August 6, 2011 by sul
senator Posted August 6, 2011 Author Report Posted August 6, 2011 i can't explain with my words, but this mod is great and works well!!
Watchmeister Posted August 6, 2011 Report Posted August 6, 2011 Don`t really know what you did but your work seems to be high quality edit: ok, I got it, screw would not come fully out any more, it is fixed from inside, but pusher will still work. Clever , but this mod need some special tools. Sul- Can you explain it to us? I have been on the fence on this one so I want to know what is going to need to be done. Also if it is a real fix there is no reason why we shouldn't tell the dealer's about it since they talk to the factories and maybe they can make the change on future runs.
gianton Posted August 6, 2011 Report Posted August 6, 2011 i can't explain with my words, but this mod is great and works well!! Did Domi fix it?
senator Posted August 6, 2011 Author Report Posted August 6, 2011 Did Domi fix it? No, my watchsmith in town!! Did Domi fix it? No, my watchsmith in town!! Did Domi fix it? No, my watchsmith in town!!
senator Posted August 6, 2011 Author Report Posted August 6, 2011 after the mods, now i'm in love with this beast
gianton Posted August 6, 2011 Report Posted August 6, 2011 No, my watchsmith in town!! No, my watchsmith in town!! No, my watchsmith in town!! Why three posts? Where are you located, your watchsmith might have some more work.
senator Posted August 6, 2011 Author Report Posted August 6, 2011 Where are you located, your watchsmith might have some more work.
prdubis Posted August 6, 2011 Report Posted August 6, 2011 Nice work, but hands are definitely too white :-( Sent from my GT-P1000 using Tapatalk
senator Posted August 6, 2011 Author Report Posted August 6, 2011 Nice work, but hands are definitely too white :-( Sent from my GT-P1000 using Tapatalk the hands are not too white, this is the problem with the cam!!! looks perfect in every kind!!!! cheers!
sul Posted August 7, 2011 Report Posted August 7, 2011 (edited) Sul- Can you explain it to us? I have been on the fence on this one so I want to know what is going to need to be done. Also if it is a real fix there is no reason why we shouldn't tell the dealer's about it since they talk to the factories and maybe they can make the change on future runs. I am guessing also, don´t have 187 in home unfortunately But , first post, last picture has to be first, it shows how will look stem if it is once pulled off. H valve stem has female and mail part`s. Inner side part will hold from inside pulling stem fully off. They are probably pressed on each other and connection is just broken ( bad material etc.) or maybe there is some low quality thread there what really don´t hold these two parts together. Stem is made from two pieces because inner part will not allow stem to pop out. But as we know it happens. Easy fix will be use glue and glue these parts together permanently, but then you can not replace o ring after some years. This solution, new tiny screw connection, will allow after some years remove H valve stem also. Probably inner side is shaved down a little, if there is screw on it, length has to be same as without screw. Screw will be part and work as pusher. It is nicely done, probably glue will work also, but connection between female and mail part`s will be weaker and you can`t never take H valve stem out any more. Rep factory could check these stem two parts connection and improve them. Seems that H valve stem is 187 weak point. Edited August 7, 2011 by sul
sul Posted August 7, 2011 Report Posted August 7, 2011 I am guessing also, don´t have 187 in home unfortunately But , first post, last picture has to be first, it shows how will look stem if it is once pulled off. H valve stem has female and mail part`s. Inner side part will hold from inside pulling stem fully off. They are probably pressed on each other and connection is just broken ( bad material etc.) or maybe there is some low quality thread there what really don´t hold these two parts together. Stem is made from two pieces because inner part will not allow stem to pop out. But as we know it happens. Easy fix will be use glue and glue these parts together permanently, but then you can not replace o ring after some years. This solution, new tiny screw connection, will allow after some years remove H valve stem also. Probably inner side is shaved down a little, if there is screw on it, length has to be same as without screw. Screw will be part and work as pusher. It is nicely done, probably glue will work also, but connection between female and mail part`s will be weaker and you can`t never take H valve stem out any more. Rep factory could check these stem two parts connection and improve them. Seems that H valve stem is 187 weak point. male not mail, sry about spelling English is not my first language not even second probbaly
FxrAndy Posted August 24, 2011 Report Posted August 24, 2011 Is this fix functional as i am trying to do the same but i cant get enough movemernt to make it functional
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now