umarion Posted October 29, 2011 Report Share Posted October 29, 2011 Hey folks, I've just acquired a gen (according to the seller) sub dial on fleabay for quite cheap. But just to be sure, I would like to kindly ask that the experts chime in on this. My knowledge of a gen dial is merely limited to flat top A's letterings on the dial and superluminova lume. So far with my observations, the lume is a superluminova color although lacks a tad bit intensity from my wm9 v3 dial which is amazing. I can't seem to investigate the dial further without a loupe, though with naked eyes I noticed that all the markers are slightly smaller than my wm9 v3. Sorry I don't have a better camera than my iphone4 for now. And experts, please help me with this. Thanks in advance! Link to comment Share on other sites More sharing options...
freddy333 Posted October 29, 2011 Report Share Posted October 29, 2011 I am better with vintage, but this does not even look like a good rep, which explains why you got it 'for quite cheap'. With so many serious collectors literally scouring ebay (& most other online sites that cater to vintage Rolex), it is highly unlikely that a good quality, gen Rolex piece would go for cheap. That just does not happen anymore. Link to comment Share on other sites More sharing options...
umarion Posted October 29, 2011 Author Report Share Posted October 29, 2011 Care to elaborate more freddy333? Like what the tells are and what I should look for on it? Link to comment Share on other sites More sharing options...
zaza Posted October 29, 2011 Report Share Posted October 29, 2011 Can you define "cheap"? Link to comment Share on other sites More sharing options...
umarion Posted October 29, 2011 Author Report Share Posted October 29, 2011 (edited) Seller opened bid at 100 with 200 buy it now. I got it for $100 + 20 shipping. I'm glad ebay has the buyer protection thing. Shame on me for not knowing enough on what to look for plus the pics were quite unclear and vague But before anything, I would like to ask the experts and veterans to school me on the dial so I won't make the same mistakes again. Edited October 29, 2011 by umarion Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted October 29, 2011 Report Share Posted October 29, 2011 yours seems to be missing the makers mark and the alignment of the 'L' in rolex looks too far left under the 12 o clock coronet Link to comment Share on other sites More sharing options...
kbh Posted October 29, 2011 Report Share Posted October 29, 2011 It does have a nicer date window than most rep dials and nice crisp printing. Not a total loss. Link to comment Share on other sites More sharing options...
alligoat Posted October 29, 2011 Report Share Posted October 29, 2011 Here's a gen to compare with- from 2007 I agree with highoey that your 'L' in Rolex is a tad too far to the left. But the problem with Rolex is things are always changing. I looked thru ebay and found another far left dial, LOL, this one is five ticks on the Swiss Made, whereas yours is three- but we all know that doesn't matter. Link to comment Share on other sites More sharing options...
freddy333 Posted October 29, 2011 Report Share Posted October 29, 2011 Care to elaborate more freddy333? Like what the tells are and what I should look for on it? For starters, your date window sucks. Rolex would never let a dial like this leave their factory Link to comment Share on other sites More sharing options...
kbh Posted October 29, 2011 Report Share Posted October 29, 2011 Could be you're just looking at a shadow. Link to comment Share on other sites More sharing options...
umarion Posted October 29, 2011 Author Report Share Posted October 29, 2011 yours seems to be missing the makers mark and the alignment of the 'L' in rolex looks too far left under the 12 o clock coronet That's how I knew that I've made a mistake. I only emailed the seller asking in regards to it's authenticity and if it had flat A's lettering throughout the dial... It does have a nicer date window than most rep dials and nice crisp printing. Not a total loss. I don't know about the date window, but the printing is definitely crisp. Too bad that it's not a gen like what I hoped it would be It has quite good lume on it, same color as the wm9 dial but with less intensity. On a curious note, which rep watch did this dial came with? Link to comment Share on other sites More sharing options...
umarion Posted October 29, 2011 Author Report Share Posted October 29, 2011 For starters, your date window sucks. Rolex would never let a dial like this leave their factory Don't mind the shadow Link to comment Share on other sites More sharing options...
kbh Posted October 29, 2011 Report Share Posted October 29, 2011 I've never seen a rep Sub dial that has the indented box around the edge of the date window. Link to comment Share on other sites More sharing options...
Ephry73 Posted October 29, 2011 Report Share Posted October 29, 2011 Just to kick a dead horse, the date window is not as "sharp" as gens. The L under the coronet should be a dead giveaway. I have a better Noob dial than that one, and I did not pay that much. eBay is getting ridiculous. E Link to comment Share on other sites More sharing options...
Eiderdaus Posted October 30, 2011 Report Share Posted October 30, 2011 looks like the sean dial Link to comment Share on other sites More sharing options...
blue_sphere Posted October 30, 2011 Report Share Posted October 30, 2011 No rolex mark on the back means you bought a fake man. Get your money back! Link to comment Share on other sites More sharing options...
its_urabus Posted October 31, 2011 Report Share Posted October 31, 2011 I almost totally agree with the Sean dial comment, but my Sean dial has better markers. The printing is similar, but as the OP stated, it is very crisp printing. Funny thing is my sean dial is not superlumed, it's only as good as my noob. Let us know what you do with it, and make sure to post pics if you decided to keep it. Link to comment Share on other sites More sharing options...
umarion Posted November 1, 2011 Author Report Share Posted November 1, 2011 UPDATE: I have returned the dial to the seller today. He's been quite good with replying back and forth, so I'm sure it will be a hassle free return. I always have the buyer protection thing as a safety net. But all in all a lesson learned Thanks everyone for helping out in pointing the flaws. I almost totally agree with the Sean dial comment, but my Sean dial has better markers. The printing is similar, but as the OP stated, it is very crisp printing. Funny thing is my sean dial is not superlumed, it's only as good as my noob. Let us know what you do with it, and make sure to post pics if you decided to keep it. My original plan is to swap a gen dial in my wm9 v3. Only a gen dial is worthy to replace the wm9 IMO. Alas, I have a gen crystal waiting to be installed, so that cancels out my dial frustrations Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now