tah Posted November 15, 2011 Report Share Posted November 15, 2011 I just got a 14060 from Silix yesterday and am overall very pleased with the watch. They even shipped me the one with the lug holes after I got tired of waiting for it and gave up. Told them to go ahead and ship the one with no holes but I guess they got it just in time. I'll try to post pictures later, it's pretty damn accuarate! Anyway here's my problem with the bracelet. On the end of the bracelet, by the clasp, 6 o'clock side of the watch, there are two removable links. I have removed one. The last link is held by a screw that goes into the half link which is part of the clasp. This last screw, through the half link, holding the last removable full link, won't budge. I've gotten a good screwdriver on it and any more force I'm afraid of completely screwing (no pun intended) it up for good. Has anyone ever gotten an extremely stubborn bracelet screw loose by applying heat or by another method? Any advice would certainly be appreciated. In adjusting it to fit reasonably well I've had to take all the slack from the other side, the adjusting holes within the clasp. Now the watch rides on my wrist high on the noon side....leans AWAY from me. I don't care for this. When I adjust my watches and I HAVE to choose a side I have it leaning slightly TOWARDS me............. Thanks............... Link to comment Share on other sites More sharing options...
duke1973 Posted November 16, 2011 Report Share Posted November 16, 2011 I would try heating it up first, if that didn't work I'd try a mild solvent or WD-40. Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted November 16, 2011 Report Share Posted November 16, 2011 looking forward to these pictures Link to comment Share on other sites More sharing options...
tah Posted November 16, 2011 Author Report Share Posted November 16, 2011 Soaked it overnight in KROIL (Kano Research OIL). Supposedly penetrates to 0.000001 inch, that's to the millionth of an inch! Used the stuff on old cars before and it's unbelievable. If you ever need a great penetrant I really don't think you can beat this stuff. Used by all the Aerospace Companies and all the Fortune 500 companies involved in any kind of assembly/disassembly work. I bought a can that will probably last me for life over 5 years ago. Got the screw loose and also loosened the fixed link pin that you're not supposed to be able to move. Now I have to get some epoxy or super glue to put the link back together. What glue have others used? This is just the pin that slides into the other half of the link. Smooth surface to smooth surface, but a VERY tight fit. Guess the KROIL penetrated this VERY tiny space also. Link to comment Share on other sites More sharing options...
phillycheez Posted November 16, 2011 Report Share Posted November 16, 2011 Pics of 14060 with lug holes? Been waiting for this rep! Link to comment Share on other sites More sharing options...
tah Posted November 16, 2011 Author Report Share Posted November 16, 2011 (edited) I'll get some pictures up after I get the band put back together. But this thing is pretty freakin accurate. I had two gens of this watch, a non engraved rehaut, non-COSC 14060, as well as an engraved COSC 14060M. I've compared this rep to the pictures of the gens and am REALLY liking what I see. I'll post them here or in the main Rolex forum, but if I post them elsewhere, I'll leave a note here............ Edited November 16, 2011 by tah Link to comment Share on other sites More sharing options...
Dizzy Posted November 17, 2011 Report Share Posted November 17, 2011 I have an old gen datejust jubilee bracelet and the screws feel like they are welded in. I have tried penetrating oils and heat and they wont budge. I eventually gave up before i completely stripped out the screw heads. Someone must have used epoxy or something to secure them. I was thinking i might take the bracelet to a machine shop and see if they can drill out the screws... dizz Link to comment Share on other sites More sharing options...
woof* Posted November 17, 2011 Report Share Posted November 17, 2011 Dizzy, the last one I had like that I took to a jeweler. He used cobalt bits and drilled it out...was frowning when I picked it up. He told me he broke three bits doing it. Jewelers are not fans of stainless steel Link to comment Share on other sites More sharing options...
tah Posted November 17, 2011 Author Report Share Posted November 17, 2011 14060 from Silix: Pictures posted.................. http://www.rwg.cc/topic/139867-14060-from-silix/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now