Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

TC's V2 Bracelet Photo Review


grifter

Recommended Posts

Here is the V2 bracelet that TC has. I'm not going to say much except please excuse the cheese on the watch as I've worn it non stop since receiving it from BK and please excuse my funky fingers as I've been playing with air-dry clay and markers for hours with my kid and no matter how many times I wash them they won't seem to get clean..

Oh and the bracelet is pretty damn nice.

e278fb9d.jpg

36b586e2.jpg

9c617c39.jpg

27e80a62.jpg

a90563b3.jpg

f4dbb7bd.jpg

a24903e5.jpg

9658d466.jpg

846a1646.jpg

ef7a558f.jpg

94fbf748.jpg

6e05909d.jpg

5875aa05.jpg

898f93ab.jpg

56163ee4.jpg

664af51c.jpg

a66dfc4d.jpg

9fb7349d.jpg

4a1a1d49.jpg

109ce4d7.jpg

029de7a1.jpg

a0bba4a6.jpg

Notes:

* TC seems longer than the TW bracelet. I removed three links and micro adjusted one spot on the TW. I removed three links and had to micro adjust 2 spots on the TC for the same fit for my 7" wrist.

* End links are tight to the case, but not tight enough. Macro pics don't help, but on the wrist it is not too shabby.

* Engravings are crisp and nice.

* Every screw was threaded nicely and screwed in and out perfectly. (Yes I tried every one of them)

* Clasp is probably one of the nicest I've ever handled and the flip lock works smoothly just like on my gen bracelets.

* Diver's extension works flawlessly by depressing the "o" and disengaging the hook. Otherwise it stays put.

* Didn't I write I wasn't going to say much? ;)

Thanks for looking and hope this helps for those looking for a good 93250 with hollow links.

Link to comment
Share on other sites

this looks exactly like my wm9v2 bracelet

What's the size of the end lugs? it is > 20mm? I got the V1 bracelet from TC and its exactly 20mm which is a bit too small for the BK TW case.

found this info in TC's V2 review:

"Now back to specs, width of TC 93250 V2 SEL is 20.13 mm. Length from lug to lug of TC Submariner Watchcase is 20.17 mm. There is still 0.04 mm gap in total, that is, 0.02 mm gap on each side. Gen's tolerance is only 0.01 mm in total, that is 0.005 mm on each side."

Edited by coolchu001
Link to comment
Share on other sites

First I took my calipers and measured the inside lug width of BK's TW case.

920cbd3d.jpg

10209195.jpg

Then I measured the end links of TC's bracelet.

80514612.jpg

f2de8a61.jpg

Then just to be sure I measured it suspended by the calipers.

cb67ac02.jpg

0f9304d7.jpg

My calipers were zero'd before each measurement.

My calipers were reading the TW case lugs at 20.7 mm on both ends.

My calipers were reading the end links of the TC V2 bracelet at 20.6 mm on both ends.

My calipers suck and I need to invest in a nice one...

Hope this helps. :)

Edited by grifter
Link to comment
Share on other sites

Whoops! yup should be .06 and .07..

Going to buy new calipers and new glasses.

brb

:D

wow if that's correct the tolerance is of a gen case and bracelet!

from TC's V2 review

"There is still 0.04 mm gap in total, that is, 0.02 mm gap on each side. Gen's tolerance is only 0.01 mm in total, that is 0.005 mm on each side."

Link to comment
Share on other sites

Guest zeleni kukuruz

Guys is the gap between lug and strap really noticable on the wrist? Only reason i ask is all the pictures were all looking at are close up macro shots, you will notice big differences this close ? :)

Mate, there is no way for the naked eye to see that difference.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up