cib0rgman Posted February 15, 2012 Report Share Posted February 15, 2012 My order came today and I snap some pictures for you to see, I order everything execept the crytsal (planing on getting a Gen one, but TC sent one for free if I do a review of the crystal to which I agree ), bracelet (waiting for better version) and insert (have a gen one) I tried to install the Gen insert and to my surprise it does not fit at all, I wonder if my insert is for a Seadweller; I will make time next week to this Baby together. on to the pictures Quote Link to comment Share on other sites More sharing options...
Guest zeleni kukuruz Posted February 15, 2012 Report Share Posted February 15, 2012 One more to mark from the list. Very nice m8 But strange about the insert! Quote Link to comment Share on other sites More sharing options...
cib0rgman Posted February 15, 2012 Author Report Share Posted February 15, 2012 I am checking with my source to confirm that in fact is for a Submariner and not SD Quote Link to comment Share on other sites More sharing options...
Tribal Posted February 15, 2012 Report Share Posted February 15, 2012 TC is shipping fast. Good u received your guts. Quote Link to comment Share on other sites More sharing options...
Guest zeleni kukuruz Posted February 15, 2012 Report Share Posted February 15, 2012 TC is on a plane to China right now hmmmm wonder way he hade to go guess more good things will be seen here My fully asambled V-case watch is in UK right now! Quote Link to comment Share on other sites More sharing options...
watcher Posted February 15, 2012 Report Share Posted February 15, 2012 I hope your insert is wrong as this would be a shame. If it was an sd insert the crystal will not fit through it! Quote Link to comment Share on other sites More sharing options...
cib0rgman Posted February 15, 2012 Author Report Share Posted February 15, 2012 The crystal is for a submariner for sure, but the outer diameter of the insert is too big for the bezel Sent from my SGH-i917 using Board Express Quote Link to comment Share on other sites More sharing options...
cib0rgman Posted February 15, 2012 Author Report Share Posted February 15, 2012 I see what you the SD crystal is smaller in diameter? Sent from my SGH-i917 using Board Express Quote Link to comment Share on other sites More sharing options...
cib0rgman Posted February 15, 2012 Author Report Share Posted February 15, 2012 here is a picture of the crystal and the insert together is goes fine over the crystal. I am thinking that the bezel is too small, which is big NO here..... Quote Link to comment Share on other sites More sharing options...
bwhitesox Posted February 15, 2012 Report Share Posted February 15, 2012 Is TC listed as a dealer here as he seems to be shipping lots of parts out? Quote Link to comment Share on other sites More sharing options...
Star69 Posted February 15, 2012 Report Share Posted February 15, 2012 Is TC listed as a dealer here as he seems to be shipping lots of parts out? not yet - i think we need an prof dealer who can provide this parts ... Quote Link to comment Share on other sites More sharing options...
woof* Posted February 15, 2012 Report Share Posted February 15, 2012 SD insert is smaller inside, so it's possible you do have a SD insert. Quote Link to comment Share on other sites More sharing options...
cib0rgman Posted February 15, 2012 Author Report Share Posted February 15, 2012 SD insert is smaller inside, so it's possible you do have a SD insert. Well I can not tell for sure does anyone knows the diameter of the bezel? Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted February 15, 2012 Report Share Posted February 15, 2012 There was a post with the dimentiosn in it just the other day Quote Link to comment Share on other sites More sharing options...
vlydog Posted February 15, 2012 Report Share Posted February 15, 2012 http://www.rwg.cc/topic/143082-received-my-tc-case/page__fromsearch__1 Quote Link to comment Share on other sites More sharing options...
cib0rgman Posted February 15, 2012 Author Report Share Posted February 15, 2012 http://www.rwg.cc/to...__fromsearch__1 The OP on that post did not measured the bezel inner lip or tried to install a Gen insert Quote Link to comment Share on other sites More sharing options...
FxrAndy Posted February 15, 2012 Report Share Posted February 15, 2012 There was i post the other day with the insert dimentions in it but for the life of me i cant find it or remember who posted it, any one???? Quote Link to comment Share on other sites More sharing options...
its_urabus Posted February 15, 2012 Report Share Posted February 15, 2012 I too hope it is a insert issue and not a bezel issue. keep us informed! Quote Link to comment Share on other sites More sharing options...
Tribal Posted February 15, 2012 Report Share Posted February 15, 2012 (edited) SD insert is smaller inside, so it's possible you do have a SD insert. A SD Insert has smaller inner and outer Diameter. Also a SD Crystal has a smaller diameter than a Sub one. I think you have a Sub Insert a SD one is too small for a Sub. To fit a gen Insert is not that easy, it need some force to clip in. I think it's the usual issue on a Rep Bezel, the Insert needs to grind a bit?!? Edited February 15, 2012 by Tribal Quote Link to comment Share on other sites More sharing options...
the_rymeister Posted February 15, 2012 Report Share Posted February 15, 2012 Keep us posted buddy on the insert,I too haveva gen insert to fit I hope it goes in ok, I do remember tc saying something about having to press something when fitting insert? Not sure if it was pressing bezel onto case or pressing insert into bezel? I thought fitting insert was literally prising off bezel popping out insert and fitting new insert? I've never fitted one so Im not totally sure Quote Link to comment Share on other sites More sharing options...
its_urabus Posted February 15, 2012 Report Share Posted February 15, 2012 this was on the Sean case, but the gen insert popped in after pressing pretty hard. i never thought it wouldnt fit, it seemed correct. does yours seem really big? or does it seem like it will go if you are stern with it Quote Link to comment Share on other sites More sharing options...
Tribal Posted February 15, 2012 Report Share Posted February 15, 2012 (edited) Sub Insert 16610 Outside 37,65mm Inside. 30,70mm SD 16660 Outside 36,65mm Inside. 29,70mm Edited February 15, 2012 by Tribal Quote Link to comment Share on other sites More sharing options...
the_rymeister Posted February 15, 2012 Report Share Posted February 15, 2012 Are they generally a tight fit? Ie needing a press? Quote Link to comment Share on other sites More sharing options...
Tribal Posted February 15, 2012 Report Share Posted February 15, 2012 Are they generally a tight fit? Ie needing a press? Yes but a press is not a tool to do it. There are several tutorials on the Net. Quote Link to comment Share on other sites More sharing options...
Tribal Posted February 15, 2012 Report Share Posted February 15, 2012 Insert Tutorial http://www.vikbobil.se/bezel.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.