the_rymeister Posted March 16, 2012 Report Share Posted March 16, 2012 Hi guys I have now got my brand new gen insert for my tc sub 11610. Previously I bought a second hand one last month for £100 and snapped it trying to fit it I've been trying to fit it tonight for at least 2hours and my finger tips feel like they are bleeding Before I snap my new one which I've just payed £140 for is there anyone in uk I can send to or bring to in uk! I'm in Surrey . Please anyone if you can help that would be great. I've tried following tutorials and nothing is working. It feels like it will never fit Thanks in advance guys I really appreciate it. Ry Link to comment Share on other sites More sharing options...
danza1812 Posted March 16, 2012 Report Share Posted March 16, 2012 I'm wondering now Ry if your TC sub has a smaller bezel ring than others, it takes some pressure but not 2 hrs worth! I feel for you. I'd do it for you but I'd feel terrible if I broke anything. May be worth buying a new bezel from TC and trying to fit it onto that first. I know it's more expense but has to be better than the cost if a new insert...again! Link to comment Share on other sites More sharing options...
the_rymeister Posted March 16, 2012 Author Report Share Posted March 16, 2012 Yeah it could be a possibility Matt. Only problem is last time I ordered from tc when he shipped me a bracelet from china it never arrived due to customs issues so it's whether it will turn up? It wasn't anything wrong with tc or his services just purely customs. Link to comment Share on other sites More sharing options...
watcher Posted March 17, 2012 Report Share Posted March 17, 2012 Is your insert a new one? I had an older insert to start with and it was physically bigger in diameter and would not fit! I now have the flat 4 insert I bought on eBay and it fits easier. I now have the problem that the bezel is too stiff so I may need to trim it on the back so it fits better! Good old reps!!! Link to comment Share on other sites More sharing options...
the_rymeister Posted March 17, 2012 Author Report Share Posted March 17, 2012 Is your insert a new one? I had an older insert to start with and it was physically bigger in diameter and would not fit! I now have the flat 4 insert I bought on eBay and it fits easier. I now have the problem that the bezel is too stiff so I may need to trim it on the back so it fits better! Good old reps!!! Hi bud it's brand new the insert I've got, I can get it in the bezel ring about 90% but just can't for the life of me get the last part in. I think I will try filing the bezel a bit today. So frustrating Link to comment Share on other sites More sharing options...
watcher Posted March 17, 2012 Report Share Posted March 17, 2012 Try gently pushing against a work top edge or something wood that will not scratch, that worked for me. Link to comment Share on other sites More sharing options...
woof* Posted March 17, 2012 Report Share Posted March 17, 2012 A crystal press should work. Link to comment Share on other sites More sharing options...
the_rymeister Posted March 17, 2012 Author Report Share Posted March 17, 2012 Hi guys I've got a crystal press but I think when I used it last time it slightly flattened my insert which is why I think it snapped, and when you say try pressing against a table would you suggest so the insert is flat against the table or pushing on the edge of the insert? I've tried and I get nearly get it in but soon as I get the last part in it pops out somewhere else.surely it shouldn't be this tight? Link to comment Share on other sites More sharing options...
janeto72 Posted March 17, 2012 Report Share Posted March 17, 2012 (edited) file the insert...i had the same problem and bent the insert and bezel....I got it in 90%...I should have filed it a little bit and tried a bit at a time.....now i'm waiting on TC to see if he can source me a spare or two from his supplier....You just have to go slow and take your time........my bezel may have been a tad small or my insert may have been a tad too big.Hold the insert on it's side and make 5-6 forward and backward motions,gently on some fine sandpaper 220 grit or higher and slowly work your way around bweteen the ten minute markers.After going around once, try installig the insert again.....it should fit ...if not file a little more...remember...TAKE YOU TIME!It will be alot of fun! Edited March 17, 2012 by janeto72 Link to comment Share on other sites More sharing options...
the_rymeister Posted March 17, 2012 Author Report Share Posted March 17, 2012 I've done it !!!!!. Finally :) :) :) Janeto you are a god! I lightly sanded the edge with 1500 grit paper. I went round twice. So it wasn't as big as I thought . I'm sooooooooooo happy. Thanks everyone for your help and advice I seriously appreciate it Link to comment Share on other sites More sharing options...
watcher Posted March 17, 2012 Report Share Posted March 17, 2012 Good stuff! Link to comment Share on other sites More sharing options...
the_rymeister Posted March 17, 2012 Author Report Share Posted March 17, 2012 No I can wear it and finally enjoy it Link to comment Share on other sites More sharing options...
the_rymeister Posted March 17, 2012 Author Report Share Posted March 17, 2012 Quick pic Link to comment Share on other sites More sharing options...
janeto72 Posted March 17, 2012 Report Share Posted March 17, 2012 nice! it looks great! The work paid off! Link to comment Share on other sites More sharing options...
cib0rgman Posted March 17, 2012 Report Share Posted March 17, 2012 I'm wondering now Ry if your TC sub has a smaller bezel ring than others, it takes some pressure but not 2 hrs worth! I feel for you. I'd do it for you but I'd feel terrible if I broke anything. May be worth buying a new bezel from TC and trying to fit it onto that first. I know it's more expense but has to be better than the cost if a new insert...again! glad to hear is all good, enjoy it Link to comment Share on other sites More sharing options...
woof* Posted March 17, 2012 Report Share Posted March 17, 2012 I love a happy ending! Well done! Lookin good! Link to comment Share on other sites More sharing options...
the_rymeister Posted March 17, 2012 Author Report Share Posted March 17, 2012 Cheers guys I'll take a few inres pics when I get a moment Link to comment Share on other sites More sharing options...
danza1812 Posted March 17, 2012 Report Share Posted March 17, 2012 Phew! Big relief well done. Link to comment Share on other sites More sharing options...
iceman81 Posted March 18, 2012 Report Share Posted March 18, 2012 Does it need some extra glue too? Don't want lost the gen insert! Link to comment Share on other sites More sharing options...
the_rymeister Posted March 18, 2012 Author Report Share Posted March 18, 2012 Does it need some extra glue too? Don't want lost the gen insert! No extra glue needed buddy, even though I sanded it very slightly it's still a tight fit, if you sand it don't go mad as I really only sanded very very lightly with 1500 grit paper Link to comment Share on other sites More sharing options...
chou Posted May 7, 2012 Report Share Posted May 7, 2012 ry where did you pickup your gen insert from? 1 Link to comment Share on other sites More sharing options...
the_rymeister Posted May 7, 2012 Author Report Share Posted May 7, 2012 Pm buddy Link to comment Share on other sites More sharing options...
jackagi Posted May 7, 2012 Report Share Posted May 7, 2012 Ry would also like to know that :-)! Link to comment Share on other sites More sharing options...
GBOGH Posted May 31, 2012 Report Share Posted May 31, 2012 Well done. Looking good. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now