ryanwayer Posted June 6, 2012 Report Share Posted June 6, 2012 As many of you may know I'm producing a Correct REP dial for AP GP, I have been told noob factory couldn't make the rep dial to be perfect, I was so confusing why they can't make it correctly as just update some minor flaws, So I was planning to produce this by myself, I found a dial factory which is reputable and good craftsmanship, they can use a better mold to make this dial, able to fix the hatch marks problem of noob dial and all the sub dial flaws, so the other problem is the middle part of the coating, noob factory just use the epoxy on the middle part, but the Gen one is using matt metallic coating , I found a good plating factory and they have that color which close to the GEN dial. The rep GP Full carbon version Gold Tachymetre ring is incorrect color, the rep one is light gold coating, the Gen one is more dark gold color, that's not the normal plating color so most of the plating factory told me they can't make it accurate to the gen color, I found another plating company can make the plating color like that, in Chinese it call " color plating" and I hope it will get good result. I also will make this Tachymetre ring if the color is accurate. The project is now beginning and the factory already give me the Computer draft picture, the first dial sample will be finished very soon when I have confirmed the coating color. 1) fixed the wrong sub dial color of noob dial. 2) fixed wrong fonts in the sub dial. 3) fixed the hatch marks close to the 9 o' clock subdial. On the rep the hatch marks have a circular cut-out near the subdial but this is not present on the gen. 4) The Rep sub dial outer ring is too fat compare with Gen, the Gen one should be thinner. 5) will be use the correct Matt metallic coating of the middle part, Matt Blue and Matt Red, The gen one is shiny in some angle but actually it's matt metallic color. 6) correct the "SWISS MADE" fonts. Link to comment Share on other sites More sharing options...
DamonHorse Posted June 6, 2012 Report Share Posted June 6, 2012 Very cool. What is one of these bad boys going to cost? Link to comment Share on other sites More sharing options...
Inertiadrifter Posted June 6, 2012 Report Share Posted June 6, 2012 That's great X2 on the price Link to comment Share on other sites More sharing options...
Mr Z Posted June 7, 2012 Report Share Posted June 7, 2012 Hi Ryan that's great work .. looking forward to this project very much ... how about the incorrect dial on the rose gold version ?? will as that has dial flaws .. wrong sub dial colour and wrong tachy red writing and wrong red on sub dial hands and chrono hand? 1 Link to comment Share on other sites More sharing options...
ryanwayer Posted July 5, 2012 Author Report Share Posted July 5, 2012 updated pictures, I'm still checking the Best plating company to do the perfect color coating on middle part, This dial is Thicken than the noob dial, so don't need add the metal plate underneath. Link to comment Share on other sites More sharing options...
bertieng Posted July 5, 2012 Report Share Posted July 5, 2012 Simply amazing!!! You can find a factory to do all the machining, stamping, plating............for just ONE dial!? Just unbelievable!!!!!!! Can't imagine how much they are going to charge you. Link to comment Share on other sites More sharing options...
Legend Posted July 5, 2012 Report Share Posted July 5, 2012 beautiful.. let us know when one of these are for sale! Link to comment Share on other sites More sharing options...
Guest Daytona1984 Posted July 5, 2012 Report Share Posted July 5, 2012 that is awesome! are they also able to produce a 1:1 dial when it comes to the window out cut so we can use a dubois-depraz module? this would be great, since the window out cut of the rep dial never align perfectly with the date wheel of the 2892 with dd module... Link to comment Share on other sites More sharing options...
ryanwayer Posted July 5, 2012 Author Report Share Posted July 5, 2012 I will produce this about 80 pcs, 40 pcs for each color. Sent from my GT-I9300 using Tapatalk 2 Link to comment Share on other sites More sharing options...
ryanwayer Posted July 5, 2012 Author Report Share Posted July 5, 2012 yes sure. but the problem is hard to source so many 2892 movement , so quantity of the dial is not enough to produce. thats the problem. Sent from my GT-I9300 using Tapatalk 2 Link to comment Share on other sites More sharing options...
Theknowledge Posted July 5, 2012 Report Share Posted July 5, 2012 After seeing this post and the forged carbon posts. I think it is time to really consider getting a GP. However, the Open case will always be a dead give away. Put me down for the red one! Graet Job ryanwayer!! Link to comment Share on other sites More sharing options...
dexwatch Posted July 18, 2012 Report Share Posted July 18, 2012 consider me for a blue one, simply amazing work congrats Link to comment Share on other sites More sharing options...
mt666tm Posted July 19, 2012 Report Share Posted July 19, 2012 I can't wait to see how this turns out. Very impressive so far. Link to comment Share on other sites More sharing options...
shahaaditya92 Posted July 19, 2012 Report Share Posted July 19, 2012 Red one please. Great work Ryan! Link to comment Share on other sites More sharing options...
malfa Posted July 22, 2012 Report Share Posted July 22, 2012 red one here please Link to comment Share on other sites More sharing options...
Logan Posted August 12, 2012 Report Share Posted August 12, 2012 Sounds promising.. I'm probably keen depending on the end result and price of course. Link to comment Share on other sites More sharing options...
ForzaAP Posted August 21, 2012 Report Share Posted August 21, 2012 bump. How is this project coming Ryan? I am interested in a dial if your going to have a little run of them...My GP has the forged CF pieces arriving shortly Link to comment Share on other sites More sharing options...
MADRED7 Posted August 24, 2012 Report Share Posted August 24, 2012 Any updates here? Dr. Theo Link to comment Share on other sites More sharing options...
eunomians Posted October 6, 2012 Report Share Posted October 6, 2012 Updates? Are you considering making the rosegold dial version, too? Link to comment Share on other sites More sharing options...
Jkppers Posted January 22, 2013 Report Share Posted January 22, 2013 Any updates? Would be interested in a correct dial Link to comment Share on other sites More sharing options...
Legend Posted January 22, 2013 Report Share Posted January 22, 2013 are we ready to rock yet? Link to comment Share on other sites More sharing options...
eunomians Posted January 26, 2013 Report Share Posted January 26, 2013 I'm ready!! Link to comment Share on other sites More sharing options...
Jkppers Posted January 27, 2013 Report Share Posted January 27, 2013 Hey Ryan, any news, can we order? Link to comment Share on other sites More sharing options...
Mr Z Posted January 27, 2013 Report Share Posted January 27, 2013 this project is not happening as the raid on the factories .. have effected production!! i will ask Ryan chime in to confirm !! Link to comment Share on other sites More sharing options...
cpd c63 Posted February 18, 2013 Report Share Posted February 18, 2013 ARGH!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now