aeromatic Posted November 19, 2017 Report Posted November 19, 2017 (edited) Edited November 19, 2017 by aeromatic 1
Alan72 Posted December 5, 2017 Report Posted December 5, 2017 Sent from my Lenovo P2a42 using Tapatalk 2
Yllekp Posted December 28, 2017 Report Posted December 28, 2017 I have just found my favourite thread in all of Repdom. 1
nycrounders Posted December 28, 2017 Report Posted December 28, 2017 Sent from my iPhone using Tapatalk 1
Replica01 Posted January 5, 2018 Report Posted January 5, 2018 Yesterday the yuki 7206 rivet arrived: like it!Verstuurd vanaf mijn SM-G928F met Tapatalk 2
capre Posted January 6, 2018 Report Posted January 6, 2018 These chamfers are so sharp !Natural aging takes time my friend.This is the chamfers freshly done:This is how it looks after a everyday use for a half year as a toolwatch. Im working as a constructor/carpenter so you can imagine what the watch has gone through: 1
Bart Cordell Posted January 6, 2018 Report Posted January 6, 2018 Natural aging takes time my friend.It take time but it work !Mine was softened by the previous owner, but I don’t know how.
capre Posted January 6, 2018 Report Posted January 6, 2018 It take time but it work !Mine was softened by the previous owner, but I don’t know how. Yes ofcourse it works. Just look at the gen pieces yeah the case got a few nags here and there but theyre not that visible unless looking at a macro picture. The edges are by far softer now compared to when i first got the midcase. I can soften the edges by polishing the case. Ive done it on a 5513 i had but im determined that this one is only going to get natural patina. I build the watch as NOS condition so that i can enjoy the watch as it is and have a history behind every single scratch. 2
Bart Cordell Posted January 6, 2018 Report Posted January 6, 2018 Yes ofcourse it works. Just look at the gen pieces yeah the case got a few nags here and there but theyre not that visible unless looking at a macro picture. The edges are by far softer now compared to when i first got the midcase. I can soften the edges by polishing the case. Ive done it on a 5513 i had but im determined that this one is only going to get natural patina. I build the watch as NOS condition so that i can enjoy the watch as it is and have a history behind every single scratch. And have a drink to celebrate each new dings and marks
Alan72 Posted January 19, 2018 Report Posted January 19, 2018 Started as a 5513 but I used a 5512 dial Sent from my Lenovo P2a42 using Tapatalk 1
interaktiv Posted January 20, 2018 Report Posted January 20, 2018 Sent from my iPhone using Tapatalk 1
Bart Cordell Posted January 20, 2018 Report Posted January 20, 2018 Looks nice mate !I think it’s similar to mine but what are the spec please ? 1
jigelow Posted January 20, 2018 Report Posted January 20, 2018 Looks nice mate ! I think it’s similar to mine but what are the spec please ? I have noticed some similarities of ours! Smart minds and all! Cartel case modded by RJ VN/Tonny dial JK hands ETA 2846 non-hacking Gen 700 crown Gen T-19 service crystal MQ bezel and insert
Bart Cordell Posted January 20, 2018 Report Posted January 20, 2018 I have noticed some similarities of ours! Smart minds and all! Cartel case modded by RJ VN/Tonny dial JK hands ETA 2846 non-hacking Gen 700 crown Gen T-19 service crystal MQ bezel and insert RJ is a master ! Mine is : Vintagewatchmaker case set Gen 700 crown JK hours and minutes hands, seconds unknown ETA 2824 GS domed T19 MQ insert My dial
Drummania Posted January 20, 2018 Report Posted January 20, 2018 My 5512 PCGCartel case moddedAthaya crown and pearlYuki insertVietnam dialSent from my iPhone using Tapatalk 2
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now