My QC pic from PT

[Gaber]

Hi guys this is my QC for the Noob EXP II

http://img145.imageshack.us/img145/9279/imageuvp.jpg

http://img152.imageshack.us/img152/963/imagerhr.jpg

http://img26.imageshack.us/img26/7484/imagejya.jpg

http://img27.imageshack.us/img27/8031/imageurq.jpg

http://img805.imageshack.us/img805/7196/imageijd.jpg

http://img233.imageshack.us/img233/1921/imageooyk.jpg

And im waiting for the timegrapher reading to see how is this swiss 2836-2 is accurate

[abzack]

Did you notice that the marker at 7 is different than the rest?  Thicker edge...

[Guest zeleni kukuruz]

Did you notice that the marker at 7 is different than the rest? Thicker edge...

I think its just the lighting/flash.

[Mike on a bike]

Hard to tell cold be sloppy lume covering edge or the lighting.

[seafoam]

^{Look at the cornet on the dial.  Looks like it has little dimples on it.} 

[Gaber]

Hard to tell cold be sloppy lume covering edge or the lighting.

I think its covering the edge

http://img43.imageshack.us/img43/1572/imagewhx.jpg

I sent an email about it to fix it i think mark 7 its the only right one

[Gaber]

^{Look at the cornet on the dial. Looks like it has little dimples on it.}

Which one exactley

[eVojlib]

The usual issues so far, lume is overfilled and flowing over the rings... Seven Oclock ring isn't filled enough, thats why the ring looks thicker, sel fit is poor at 12 and slightly better at 6.

 

One member stated the cornet has zits which is fairly normal for the noob dials under close inspection.

 

Just all comes down to how picky you are, I would reject it if it were me.

 

Good Luck

[Gaber]

The usual issues so far, lume is overfilled and flowing over the rings... Seven Oclock ring isn't filled enough, thats why the ring looks thicker, sel fit is poor at 12 and slightly better at 6.

One member stated the cornet has zits which is fairly normal for the noob dials under close inspection.

Just all comes down to how picky you are, I would reject it if it were me.

Good Luck

I sent email to the QC with all mistakes , if they didnot fix it well , i will reject it .

What is the best email i could send it to them to fix all that issue

Thanks

[kubla]

Wow: you guys are a tough audience.

[gtanak]

The usual issues so far, lume is overfilled and flowing over the rings... Seven Oclock ring isn't filled enough, thats why the ring looks thicker, sel fit is poor at 12 and slightly better at 6.

One member stated the cornet has zits which is fairly normal for the noob dials under close inspection.

Just all comes down to how picky you are, I would reject it if it were me.

Good Luck

I sent email to the QC with all mistakes , if they didnot fix it well , i will reject it .

What is the best email i could send it to them to fix all that issue

Thanks

Whatever email they send the pics from.. That'll do. Normally 1-2 days to reply

[rolojack]

Looking forward for them to make one with the correct hand stack.... This is the first thing anyone suspicious will look at !

[jeff g]

It is pretty evident from this post why some of the dealers on RWG offering QC pics urge their perspective customers NOT to show the QC pictures to forum members prior to shipping a watch.

 

Many buyers will not scrutinize a few QC pics like what was done here.  The comments were all legitimate, and the small (or large) imperfections mentioned here would probably have gone unaddressed by the seller.

 

In one of the last two purchases I made, my seller told me directly, NOT to put the QC pics he provided on this site, for the very reason illustrated here.

Makes one think about which sellers one should deal with. 

 

Of course any of our local dealers could  always illustrate a perfect dial, and then simply ship any of his stock showing the same marked order number tag shown in QC photos.

 

Let the buyer beware.  

[abzack]

I ordered a white dial version.  I had all the same issues as everyone with lume, cyclops and sel fit.  I notified the dealer of the issues, and a day later I received a second set of QC pics.  Each issue was addressed and I was good to go.  The real test will be when I get it on my wrist.  Some dealers are doing more than others to improve quality of our reps and continue to make this a great hobby.  I see no reason why you shouldn't be able to post QC pics here to be dissected by other members.  This allows the dealer to see where the common flaws are and make recommendations to the factory for improvement.  It also ensures the buyer gets the best possible rep.  I didn't say "perfect" as these are still reps, not gen.  If you are not happy with your QC pics, explain to the dealer why you are not happy. A good dealer will do everything they can to get it right for you.  Some dealers receive positive feedback, some don't. 

[Gaber]

I ordered a white dial version. I had all the same issues as everyone with lume, cyclops and sel fit. I notified the dealer of the issues, and a day later I received a second set of QC pics. Each issue was addressed and I was good to go. The real test will be when I get it on my wrist. Some dealers are doing more than others to improve quality of our reps and continue to make this a great hobby. I see no reason why you shouldn't be able to post QC pics here to be dissected by other members. This allows the dealer to see where the common flaws are and make recommendations to the factory for improvement. It also ensures the buyer gets the best possible rep. I didn't say "perfect" as these are still reps, not gen. If you are not happy with your QC pics, explain to the dealer why you are not happy. A good dealer will do everything they can to get it right for you. Some dealers receive positive feedback, some don't.

I am grateful for your response

[Gaber]

I ordered a white dial version. I had all the same issues as everyone with lume, cyclops and sel fit. I notified the dealer of the issues, and a day later I received a second set of QC pics. Each issue was addressed and I was good to go. The real test will be when I get it on my wrist. Some dealers are doing more than others to improve quality of our reps and continue to make this a great hobby. I see no reason why you shouldn't be able to post QC pics here to be dissected by other members. This allows the dealer to see where the common flaws are and make recommendations to the factory for improvement. It also ensures the buyer gets the best possible rep. I didn't say "perfect" as these are still reps, not gen. If you are not happy with your QC pics, explain to the dealer why you are not happy. A good dealer will do everything they can to get it right for you. Some dealers receive positive feedback, some don't.

Im new in rep world

And i donot have enough experience to know the smallest details and errors I just wanted help from the members here

Thanks

[Gaber]

Admin please delete this post

Thanks

[octavian]

The most obvious cosmetic flaw of the black version is the length of orange on the orange hand.  There should be a longer black portion before the orange starts.  This is easy to spot when comparing it to a genuine. 

[Gaber]

The most obvious cosmetic flaw of the black version is the length of orange on the orange hand. There should be a longer black portion before the orange starts. This is easy to spot when comparing it to a genuine.

I see but its still rep

and i think i will mod this watch to the gen one ( crystal ,dial ,crown, tube etc... ) if its possible

I will see what i can do with it to make it perfect

[Gaber]

QC Updated

http://img59.imageshack.us/img59/7138/imageoke.jpg

[d4v1d]

Looks good bro! Consider this watch too but heard that the black dial is way off... Is that true?

[Gaber]

Looks good bro! Consider this watch too but heard that the black dial is way off... Is that true?

I cannot judge till i get the watch in my hand

I will post full review about it soon with pics