Whatever123 Posted March 22, 2013 Report Posted March 22, 2013 Hi! On my TC Sub LV the dates are perfectly centered from 1-18 and sit about 0,5mm too low from 19-31... Is that normal? I had the same issue on my old WM9 V2 Sub, so this looks like a WM9 DWO to me. Could it be that I have got TC's "factory direct" LV and the DWO is the old WM9 one? Thanks Whatever123 P.S.: If anyone has a spare TC V2 DWO please PM me!
SSTEEL Posted March 22, 2013 Report Posted March 22, 2013 (edited) Post some photos my friend so we have take a look. Macro shots if you can mate. Edited March 22, 2013 by SSTEEL
Whatever123 Posted March 23, 2013 Author Report Posted March 23, 2013 OK, here we go. Aligned well: Aligned not well: Looks the same as on my old WM9 Sub. This is not a TC date wheel, is it?
SSTEEL Posted March 23, 2013 Report Posted March 23, 2013 I agree, that's not right. Get in touch with TC, and see if he will replace it for the correct DWO.
mymanmatt Posted March 24, 2013 Report Posted March 24, 2013 Most likely the dwo was not positioned correctly when it was installed, off to one side. I have fixed many of them
Whatever123 Posted March 24, 2013 Author Report Posted March 24, 2013 I agree, that's not right. Get in touch with TC, and see if he will replace it for the correct DWO. Oh, I didn't buy it directly from TC. Got it used from another member. I don't blame him at all by the way, I got a good price and I am satisfied. Still I want to improve the date wheel. And I wonder if my watch might be TC's "factory direct" model. Did he change the DWO on those at all? Or could it be the stock DWO from the factory? Most likely the dwo was not positioned correctly when it was installed, off to one side. I have fixed many of them Hmm, but that's not possible if half of the dates are correctly aligned, or is it?
Ephry73 Posted March 24, 2013 Report Posted March 24, 2013 If you're comfortable taking dials, hands and date wheels off the movement, you can peel the DWO off and re-glue it correctly. Use an Exacto knife between the DWO and the date wheel. It looks like the date overlay is also too left biased. I have installed a few if the TC DWO and it takes time to get it right, but when you do it's all worth it.
mymanmatt Posted March 25, 2013 Report Posted March 25, 2013 Not only is it possible, its been done many many times
sneed12 Posted March 25, 2013 Report Posted March 25, 2013 Not only is it possible, its been done many many times Yep
Whatever123 Posted March 25, 2013 Author Report Posted March 25, 2013 Hmm, OK... I still don't quite get it. If you don't position the DWO correctly, then imo all dates should be off and not only half of them. I thought if only some dates are not correctly aligned the DWO must be misprinted. Can someone explain please...?
sneed12 Posted March 25, 2013 Report Posted March 25, 2013 The datewheel can be off in a number of ways. If it's centered correctly but rotated, then yes, all of the dates will be off. If it's almost centered, but shifted slightly to the side (ie, towards 3 or 9 o clock) half the dates will be almost centered and half the dates will be high or low. It's much easier to see a crooked/high/low date than to see that a date is a fraction of a mm off center, so this is a common issue when fitting/installing a date wheel.
Whatever123 Posted March 27, 2013 Author Report Posted March 27, 2013 OK, I think I understand it now... thanks for the clarification. Hopefully someone can fix it for me. By the way: TC says he's running low on V2 DWOs but will have V3 ready in 30-45 days. 1
the_rymeister Posted April 2, 2013 Report Posted April 2, 2013 I have the same issue on my tc sub here you can see mine is to the left and also to low<br /><br />I'm going to get a couple of v2 dwo's from tc, does anyone have any tips on fitting or know if any tutorials on fitting them? I've had a search and found a few topics on what types of glue to use ect. Any help would be great
Whatever123 Posted April 2, 2013 Author Report Posted April 2, 2013 V2s are sold out afaik. I ordered two but will have to wait for V3...
cib0rgman Posted April 2, 2013 Report Posted April 2, 2013 V2s are sold out afaik. I ordered two but will have to wait for V3... what is good about V3 can you comments on any improvements?
Whatever123 Posted April 2, 2013 Author Report Posted April 2, 2013 No idea... might just be a new batch of V2s...?
the_rymeister Posted April 2, 2013 Report Posted April 2, 2013 Do you know when the v3 is available ?
Whatever123 Posted April 3, 2013 Author Report Posted April 3, 2013 Do you know when the v3 is available ? He said 30-45 days about a week ago. I already paid for two.
the_rymeister Posted April 3, 2013 Report Posted April 3, 2013 Cheers for the heads up think I may have sourced one
klocklind1 Posted April 4, 2013 Report Posted April 4, 2013 You can not align ALL the dates if ANY of them is not printed in the correct position from the beginning ( that is a fact!) , I have only ONE datewheel that is perfelctly align at ALL dates of the WM9 overlays. But on the new noob Ex 2 ALL the dates are perfectly aligned:) ( with swiss eta in it!)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now