ck5533 Posted March 30, 2013 Report Share Posted March 30, 2013 I am looking for 2 gen Rolex crown for my 15200 cases (take cal 3135). I got measurements from another watch which has the similar tube and size. It fits on my 15200 cases perfectly. The tube reads 4mm approx. and the crown is 5.3mm approx. Anyone knows the stock number? I need them to order from supplier? Best of all, if you have spares or know who can supply them from here, please shout! Thanks 1 Quote Link to comment Share on other sites More sharing options...
mymanmatt Posted March 30, 2013 Report Share Posted March 30, 2013 Stainless or gold? Quote Link to comment Share on other sites More sharing options...
ck5533 Posted March 30, 2013 Author Report Share Posted March 30, 2013 Stainless or gold? SS Quote Link to comment Share on other sites More sharing options...
ck5533 Posted March 30, 2013 Author Report Share Posted March 30, 2013 http://www.esslinger.com/pdfs/rolex%20chart%20copy%20case%20number%20and%20crown%20number.pdf I found this link from RG, very useful. so, the answer my question the solution is 24-530!! Quote Link to comment Share on other sites More sharing options...
1680 Posted March 30, 2013 Report Share Posted March 30, 2013 That's correct, however there are lot of people who exchanged it to a 24-603, it is the 6mm Twinlock crown that fits on a 5,3mm tube but due to its bigger size it is easier to set the time and unscrew the crown. Quote Link to comment Share on other sites More sharing options...
mymanmatt Posted March 30, 2013 Report Share Posted March 30, 2013 I have seen the 1500 series with both crowns on them. The 6mm and the 5.3. The case tube is a little under 4.0mm. It is actualy a ladies case tube. The new crowns that are 6mm fit that tube. So, you can use the new style 6mm that will fit that case tube, or you can go for the 5.3MM crown, either will work. I have both the 6mm and the 5.3 mm aftermarket. Quote Link to comment Share on other sites More sharing options...
ck5533 Posted March 30, 2013 Author Report Share Posted March 30, 2013 thanks all but atm am only looking for gen parts. Quote Link to comment Share on other sites More sharing options...
flex Posted April 1, 2013 Report Share Posted April 1, 2013 get the crown from eBay and tube from clarks or similar supplier. flex Quote Link to comment Share on other sites More sharing options...
ck5533 Posted May 26, 2013 Author Report Share Posted May 26, 2013 I purchased 2X6mm gen crowns for both cases, turned out one of them did not fit my case.......... .......not because of the crown but one of the case tube has a bigger case tube! . I learnt my lesson. Next time, measure the tube first before ordering. damn it! Now, which gen crown uses 4.5mm tube size? Quote Link to comment Share on other sites More sharing options...
1680 Posted May 26, 2013 Report Share Posted May 26, 2013 (edited) You need a crown for a 24-6000 or 24-6020 tube. 24-600 it is. Edited May 26, 2013 by 1680 Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted May 26, 2013 Report Share Posted May 26, 2013 Might have 2x gen 5.3mm crowns... I know I had some in my parts box, but may have tossed them in a round of purging as I don't have any need for them. If I still have them, they're yours. Quote Link to comment Share on other sites More sharing options...
prdubis Posted May 26, 2013 Report Share Posted May 26, 2013 HiI have a set of 530 crown and tube, sealed, for sale.Let me know. Quote Link to comment Share on other sites More sharing options...
ck5533 Posted May 27, 2013 Author Report Share Posted May 27, 2013 Might have 2x gen 5.3mm crowns... I know I had some in my parts box, but may have tossed them in a round of purging as I don't have any need for them. If I still have them, they're yours. pm sent Quote Link to comment Share on other sites More sharing options...
ubiquitous Posted May 27, 2013 Report Share Posted May 27, 2013 Had a look; I think I gave them out already Thought I had them still, but I went through all my crowns and not a single one. Sorry... Quote Link to comment Share on other sites More sharing options...
ck5533 Posted May 27, 2013 Author Report Share Posted May 27, 2013 Had a look; I think I gave them out already Thought I had them still, but I went through all my crowns and not a single one. Sorry... No worries. Thanks for your effort. Quote Link to comment Share on other sites More sharing options...
ck5533 Posted May 28, 2013 Author Report Share Posted May 28, 2013 Funny. I used one of my friend 5.3mm crown on my case, but it wouldn't fit. Now Im confused. What fits on 4.5mm tube? Worst scenario, change the tube to accept 5.3mm or 6mm crown. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.