MasterOfPuppets Posted August 25, 2014 Report Share Posted August 25, 2014 Hello everyone! Been away for a while, and i just noticed that my last post was 4 years ago Don't know who's still here since my last visit, I've been lurking around every now and then and noticed that most of the Veterans aren't as active as they used to be, hope everyone is doing well Oh well I'm sure the new ones make up for it, it's still as friendly as always! So I came across the 42mm LMPO and was so impressed with the level of details put into it, rep manufacturers have come a long way! After reading a few posts, i decided to pull the trigger, but thought i should ask our experts a few questions first: 1- The Bracelet issues, are they that hard to solve? I'm not an expert so i'd have a hard time fixing them! Any instructions i can follow?! 2- Are all parts of this model interchangeable with gen parts? If so, what are the usual fixes most members do? 3- I had my eye on the Blue Liquid Metal version as well (clear caseback), but after going the reviews i saw that the LMPO is a better option, can you guys let me know what you think about that? Many thanks in advance for all your inputs, it's time for this ancient noob to get his first real rep Link to comment Share on other sites More sharing options...
pcardoza Posted August 25, 2014 Report Share Posted August 25, 2014 I have the LMPO (from Toro) and am totally impressed with it. The bracelet issue simply requires patience & persistence for re-sizing. Be sure you get yourself a decent pin pusher (metal) for the job and CAREFULLY hammer them out. Be sure to use the directional arrows on the inside of the bracelet, when removing the pins. I had to remove 3 links on mine, so I did two on one side and one on the other. Took me about 30min all together. A little sweat and some swearing, but I got it done without incident! Link to comment Share on other sites More sharing options...
MasterOfPuppets Posted August 25, 2014 Author Report Share Posted August 25, 2014 Well then i guess i'm gona have to get me a pin pusher! Thx pcardoza i appreciate your input Link to comment Share on other sites More sharing options...
Nanuq Posted August 25, 2014 Report Share Posted August 25, 2014 MOP is in da house! Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
MasterOfPuppets Posted August 26, 2014 Author Report Share Posted August 26, 2014 Nanuq! Man it feels good to see your Avatar again! Hope you're doing well my friend Link to comment Share on other sites More sharing options...
FxrAndy Posted August 26, 2014 Report Share Posted August 26, 2014 The old guard are here just quietly getting on with life, welcome back Link to comment Share on other sites More sharing options...
Nanuq Posted August 26, 2014 Report Share Posted August 26, 2014 Nanuq! Man it feels good to see your Avatar again! Hope you're doing well my friend Life is good, my old friend. Now get with program already and start a Big Crown build, eh? The things are addicting! Link to comment Share on other sites More sharing options...
MasterOfPuppets Posted August 27, 2014 Author Report Share Posted August 27, 2014 The old guard are here just quietly getting on with life, welcome back Thx FxrAndy it's good to be back Life is good, my old friend. Now get with program already and start a Big Crown build, eh? The things are addicting! Glad to hear that buddy. Will do as soon as I get a few answers about this model, she's a beauty! Link to comment Share on other sites More sharing options...
MasterOfPuppets Posted August 29, 2014 Author Report Share Posted August 29, 2014 Anyone know what kind of mods can be applied to the LMPO? Link to comment Share on other sites More sharing options...
indywatchguy Posted August 31, 2014 Report Share Posted August 31, 2014 Greetings MOP! I did a short review on the LMPO check it out! Killer watch and don't worry about the bracelet issue once sized it's all good! I luv mine....best OTB Omega rep to date! As far as mods I really don't think it needs it...it's that good....highly recommended. Link to comment Share on other sites More sharing options...
verbal Posted August 31, 2014 Report Share Posted August 31, 2014 Anyone know what kind of mods can be applied to the LMPO? Well...I now know one mod you could potentially consider; I've waterproofed my LMPO and decided it would be my holiday watch for this year. Went diving , some snorkeling, in the pool etc and everything was OK until the last few day I was unable -or was very hard- to close the clasp. I couldn't be bothered at the time and it was only until I got home I discovered the rust inside the clasp.. Too bad the factories didn't spend an extra penny and made the spring inside the clasp stainless steel or so to prevent it from rusting.... Spring bars also didn't survive salt water and were a real pain to get out.. So , I've ordered a gen clasp from cousinsUK and some Omega spring bars , gave the bracelet a spa treatment with White Lightning and I'm a happy camper again. I must admit that if your planning to keep your rep out of the water so there's no chance for rust, don't bother getting a gen clasp; besides some minor difference in finish and tolerances there is no way you could tell which one is which.. Besides this little mishap I still think the LMPO qualifies for being a super rep, overall finish and fit are excellent, a keeper for sure ! Sent through TapaTalk Link to comment Share on other sites More sharing options...
MasterOfPuppets Posted August 31, 2014 Author Report Share Posted August 31, 2014 Greetings MOP! I did a short review on the LMPO check it out! Killer watch and don't worry about the bracelet issue once sized it's all good! I luv mine....best OTB Omega rep to date! As far as mods I really don't think it needs it...it's that good....highly recommended. Hello indywatchguy, Just read your review again, I guess I'm good to go! Thx Well...I now know one mod you could potentially consider; I've waterproofed my LMPO and decided it would be my holiday watch for this year. Went diving , some snorkeling, in the pool etc and everything was OK until the last few day I was unable -or was very hard- to close the clasp. I couldn't be bothered at the time and it was only until I got home I discovered the rust inside the clasp.. Too bad the factories didn't spend an extra penny and made the spring inside the clasp stainless steel or so to prevent it from rusting.... Spring bars also didn't survive salt water and were a real pain to get out.. So , I've ordered a gen clasp from cousinsUK and some Omega spring bars , gave the bracelet a spa treatment with White Lightning and I'm a happy camper again. I must admit that if your planning to keep your rep out of the water so there's no chance for rust, don't bother getting a gen clasp; besides some minor difference in finish and tolerances there is no way you could tell which one is which.. Besides this little mishap I still think the LMPO qualifies for being a super rep, overall finish and fit are excellent, a keeper for sure ! Sent through TapaTalk Man that looks really bad! I don't wear my watches while showering or swimming so I guess I don't need a gen clasp. Thx for the input guys, I'm pulling the trigger on this one! Link to comment Share on other sites More sharing options...
secfincorp Posted August 31, 2014 Report Share Posted August 31, 2014 Does anyone know who has stock? Sent from Tapatalk Link to comment Share on other sites More sharing options...
pcardoza Posted August 31, 2014 Report Share Posted August 31, 2014 Toro Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
karone76 Posted August 31, 2014 Report Share Posted August 31, 2014 Not sure how true is it , but I was told that the factory is out of LMPO when I received my QC picture from Toro last week. You may check with him. Link to comment Share on other sites More sharing options...
pcardoza Posted August 31, 2014 Report Share Posted August 31, 2014 Probably should email him then, as his web site still lists as In Stock. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
secfincorp Posted August 31, 2014 Report Share Posted August 31, 2014 Thanks I will Sent from Tapatalk Link to comment Share on other sites More sharing options...
cornerstone Posted September 1, 2014 Report Share Posted September 1, 2014 Good to see you MOP. Verbal, that's a great insight on the rust thing, that should be a post on its own if it isn't already. Big time issue. Also interested to hear more about the blue liquid metal from people if they have any comparison insight. Link to comment Share on other sites More sharing options...
MasterOfPuppets Posted September 1, 2014 Author Report Share Posted September 1, 2014 Good to see you MOP. Verbal, that's a great insight on the rust thing, that should be a post on its own if it isn't already. Big time issue. Also interested to hear more about the blue liquid metal from people if they have any comparison insight. Good to see you too cornerstone Toro informed me 3 days ago that it is indeed in stock and ready to ship, will be ordering it tomorrow! Link to comment Share on other sites More sharing options...
karone76 Posted September 2, 2014 Report Share Posted September 2, 2014 That's Great!! I was told out of stock when I request for third set of QC pictures. Good luck. I'm waiting for my set to arrive. Link to comment Share on other sites More sharing options...
fe22ari Posted October 19, 2014 Report Share Posted October 19, 2014 Blue LMPO has clasp issues. Had two clasps so far but the spring bar that holds it together isn't very strong and the bracelet separates from the clasp often Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now