RolloRon Posted August 20, 2015 Report Share Posted August 20, 2015 Could anyone advise if the standard Rolex case back openers (nut type) fit rep watches? I've tried my sticky ball but its too tight. I also have a 3 prong universal wrench but don't want to chance stripping the case since 316 ss is pretty soft. I'm looking a buying a set on Ebay - they're pretty cheap about $20 for the full set of six. Link to comment Share on other sites More sharing options...
themannier Posted August 20, 2015 Report Share Posted August 20, 2015 This one is a good set and not expensive also http://www.ebay.fr/itm/Watch-tool-rolex-tudor-Oyster-waterproof-watch-Screw-back-case-opener-5537-/231655821080?hash=item35efc34f18It will fit to all rep Rolex case backs, no worries Link to comment Share on other sites More sharing options...
alligoat Posted August 20, 2015 Report Share Posted August 20, 2015 Could anyone advise if the standard Rolex case back openers (nut type) fit rep watches?That set that themannier linked to should work. But it is the chinese copy of the better set made by Bergeon. Also, sometimes the Rolex dies don't work on the rep casebacks, but they're usually close enough to get the watch opened. Link to comment Share on other sites More sharing options...
RolloRon Posted August 20, 2015 Author Report Share Posted August 20, 2015 Thank you both. Link to comment Share on other sites More sharing options...
Mendota Explorer Posted August 22, 2015 Report Share Posted August 22, 2015 I just bought a very similar set with the dies on Ebay. Cost me just over $20 with free shipping from Singapore. As soon as it arrived, I tested it on all of my watches and it fit perfectly. Link to comment Share on other sites More sharing options...
RolloRon Posted August 22, 2015 Author Report Share Posted August 22, 2015 That's great thanks. Link to comment Share on other sites More sharing options...
Mendota Explorer Posted August 22, 2015 Report Share Posted August 22, 2015 I can post the link to the seller if you like. He was the cheapest one at the time. Shipping was really quick to the US, too. Link to comment Share on other sites More sharing options...
RolloRon Posted August 22, 2015 Author Report Share Posted August 22, 2015 Yes please Link to comment Share on other sites More sharing options...
automatico Posted August 22, 2015 Report Share Posted August 22, 2015 Some of the China made Bergeon look-alike case back dies will not work on backs with recessed splines like the 6694 but seem to fit everything else Ok. The outside diameter of the die can be machined or ground down just above the splines to make them work. I have a set branded 'Tianjiu' and the 6694 die will not fit the case back. Link to comment Share on other sites More sharing options...
cavi Posted August 22, 2015 Report Share Posted August 22, 2015 I found that with some watches i needed the press for the diesSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
RolloRon Posted August 22, 2015 Author Report Share Posted August 22, 2015 Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now