Satori Posted December 30, 2006 Report Share Posted December 30, 2006 So I've just been surfing and surfing and surfing the pages of this forum for a while now. And I think I'm ready to finally make my first purchase. The target rep: Tag Heuer Link Automatic Chrono. The only problem that I've been reading, is the date font being too far to the right. What I wanted to know is, is there anyone here that DOES NOT have that problem when they made this purchase? And is this problem fixable, and if so, how? Thanks a lot. Link to comment Share on other sites More sharing options...
r11co Posted December 30, 2006 Report Share Posted December 30, 2006 What I wanted to know is, is there anyone here that DOES NOT have that problem when they made this purchase? And is this problem fixable, and if so, how? Thanks a lot. I can't answer the first question in the affirmative as my has slightly askew date numerals in the two-digit range. The problem though is not the date window but the print on the datewheel itself - confirmed by a respected watchmaker. It is easy and relatively inexpensive to fix by replacing it with a genuine ETA 7750 datewheel. Link to comment Share on other sites More sharing options...
swdivad Posted December 30, 2006 Report Share Posted December 30, 2006 I pdon't believe that I had that problem, but I may not have looked close enough... Ask finepics, he has that watch now. Link to comment Share on other sites More sharing options...
MAHLER Posted December 30, 2006 Report Share Posted December 30, 2006 So I've just been surfing and surfing and surfing the pages of this forum for a while now. And I think I'm ready to finally make my first purchase. The target rep: Tag Heuer Link Automatic Chrono. The only problem that I've been reading, is the date font being too far to the right. What I wanted to know is, is there anyone here that DOES NOT have that problem when they made this purchase? And is this problem fixable, and if so, how? Thanks a lot. Not all the replicas are equal... mine has too to the right only two numbers (11 and 13) on 31... is fixable ? the datewheel on new Asian 7750 are not interchangeable with Swiss 7750... http://www.rwg.cc/members/index.php?showtopic=11891&hl= Link to comment Share on other sites More sharing options...
ryaku Posted December 30, 2006 Report Share Posted December 30, 2006 the datewheel on new Asian 7750 are not interchangeable with Swiss 7750... http://www.rwg.cc/members/index.php?showtopic=11891&hl= You sure? I thought you can replace date wheel easily with a genuine 7750 Eta wheel. Mark (Finepics) did it if i'm not mistaken. Link to comment Share on other sites More sharing options...
r11co Posted December 30, 2006 Report Share Posted December 30, 2006 I thought you can replace date wheel easily with a genuine 7750 Eta wheel. You think correctly. Link to comment Share on other sites More sharing options...
MAHLER Posted December 30, 2006 Report Share Posted December 30, 2006 You sure? I thought you can replace date wheel easily with a genuine 7750 Eta wheel. Mark (Finepics) did it if i'm not mistaken. Old Asian 7750 daydate wheel are interchangeable with Swiss 7750 daydate whell... Yes ETA wheels will fit the asian 7750. They can be bought from O.Frei in the US or Cousins in the UK. The part number is "Valjoux 7750 - 2557/1 - Date Ring" and they cost only a few bucks. Always quote the movt as all date rings have the same part number irrespective of the movt. In fact the whole industry had a common numbering system for all their parts so all watch movts from Angelus, Cortebert and ETA etc all have the same part numbers. I think Finepics said old Asian... Link to comment Share on other sites More sharing options...
r11co Posted December 30, 2006 Report Share Posted December 30, 2006 The datewheels interchange fine - trust me. The problems arise interchanging HANDS! Link to comment Share on other sites More sharing options...
Devedander Posted December 30, 2006 Report Share Posted December 30, 2006 On the subject of tag chrono I wondered is the date font on Trusty's right? It looks signifincantly different from what I would think the 25 should look like... http://www.trustytime.com/index.php?main_p...products_id=236 Link to comment Share on other sites More sharing options...
By-Tor Posted December 30, 2006 Report Share Posted December 30, 2006 On the subject of tag chrono I wondered is the date font on Trusty's right? It looks signifincantly different from what I would think the 25 should look like... http://www.trustytime.com/index.php?main_p...products_id=236 Dave... That's the "brushed bezel" version which isn't as accurate as the "polished bezel" version. That's different rep... and it used to have the serious date font issue (Check my original TAG review). http://www.rwg.cc/members/index.php?showtopic=9437 Link to comment Share on other sites More sharing options...
Satori Posted December 30, 2006 Author Report Share Posted December 30, 2006 Ok, so as of this point in time, I'm getting the conclusion that perhaps not every has the same datewheel problem? But when I buy the watch, and I happen to get this problem, a simple datewheel change will fix it, correct? If so, where do I purchase this datewheel replacement? I've checked out ofrei.com and searched for the "Valjoux 7750 - 2557/1 - Date Ring" but I was unable to find it. Help on this one? Link to comment Share on other sites More sharing options...
chrgod Posted December 30, 2006 Report Share Posted December 30, 2006 By the way... Does anybody know where to buy genuine hands for the TAGHeuer Link Chronograph?I have an ETA7750 with TAGHeuer rotor, which I would like to drop into a watch. I read one post that Ofrei has subdials hands for Omega that seem to be the same as for the Links subdials, but what about the main hands? Link to comment Share on other sites More sharing options...
cskent69 Posted December 31, 2006 Report Share Posted December 31, 2006 Ofrei has the datewheels. From our good friend Finepics in another thread: "Yes ETA wheels will fit the asian 7750. They can be bought from O.Frei in the US or Cousins in the UK. The part number is "Valjoux 7750 - 2557/1 - Date Ring" and they cost only a few bucks. Always quote the movt as all date rings have the same part number irrespective of the movt. In fact the whole industry had a common numbering system for all their parts so all watch movts from Angelus, Cortebert and ETA etc all have the same part numbers." I have ordered these and had them installed perfectly by The Zigmeister. The real question is --- is the standard ETA 7750 font the correct one for the Tag? Tag likes to use only the "8" in their advertizing. from the shape of that 8 - my guess is that it is indeed the standard 7750 ETA font. The one that comes with the Tag link Chrono (even the one with the closer but misaligned font) is wrong. I am not sure where that one came from. Link to comment Share on other sites More sharing options...
Satori Posted December 31, 2006 Author Report Share Posted December 31, 2006 Alright, so I've been doing a bit more research, and I think I've decided that I think I'll probably be using Joshua as my dealer for this particular piece. Can people who have purchased this watch from him in the past testify to the quality that he delivers? Link to comment Share on other sites More sharing options...
ubiquitous Posted December 31, 2006 Report Share Posted December 31, 2006 Joshua is top rate. What you see is what you get. Link to comment Share on other sites More sharing options...
Sylar Posted December 31, 2006 Report Share Posted December 31, 2006 I have bought over 6 watches from Josh and have gotten nothing but exceptional service from him. He is very polite to talk to and will take care of you if you encounter any problems with the watch upon receiving it. I would have no hesitation ordering from him again and will continue to do so. Link to comment Share on other sites More sharing options...
cskent69 Posted December 31, 2006 Report Share Posted December 31, 2006 Joshua is one of best. You will not miss with him. I purchased by Tag Link from him - it had a problem and he took care of me. A man of his word. Link to comment Share on other sites More sharing options...
scoobs1971 Posted January 1, 2007 Report Share Posted January 1, 2007 Happy new year everybody! I bought the Link Chrono a couple of weeks ago. A beautiful piece of work! Don´t mind the date wheel issue that much. However, what strikes me more is that the rotor (new Asian 7750) makes an incredibly loud noise. I don´t know if this is common to all new 7750´s or that this is just a single incident. But to me this aweful sound feels like a big giveaway... People can hear me moving my wrist even when standing at the other side of the room. Anyway, The Zigmeister told me he can change the Asian 7750 for a real 7750, but then the hands need to be changed as well. So in the end there´s a solution to the problem.... Cheers! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now