TC Sub, opened up... screws missing?

[rails]

Hey all, opened up my TC sub to investigate the suspected "loose" rotor, and it appears there's nothing holding it in place. It looks like there should be at least a couple screws here...

Sent from my iPhone using Tapatalk

[Rolexman]

You are missing the screws of the auto-wind bridge. 

[Ezio]

Yet another ? 

 

Wow tc's standard dropping alot lately truly shows tc dont assemble The watches 

[mymanmatt]

There are 2 black hardened screws that go there. When you put them in, tighten both sides equally. Don't tighten one side and then the other. Snug one side, then snug the other, then tighten.

[themannier]

How this is possible ? Never saw 2 missing screws there 

[rails]

Should note that I've had this for a couple years now and have never had any problems until recently.

Can someone point me to where I can buy these screws?

[themannier]

2 hours ago, rails said:

Should note that I've had this for a couple years now and have never had any problems until recently.

Can someone point me to where I can buy these screws?

You can find them on Ebay... this seller is based in Spain  http://www.ebay.fr/itm/ETA-2836-2-25-jewels-Swiss-movement-screws-116211-/111987784844?hash=item1a12fdfc8c:g:tS0AAOSwiYFXKvw9

[mymanmatt]

I have them. Sometimes they remove the rotor assy when mounting the movement.Then they forget to put the screws back.

[rails]

Thanks!

[automatico]

"Should note that I've had this for a couple years now and have never had any problems until recently."

Without the screws the aw assembly usually will not stay in place for long. Look around inside the watch and see if they are somewhere in the guts...or maybe they dropped out when you opened the back. It's a mystery.