Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Wristies - thread consolidation?


jigelow

Recommended Posts

I first put this in 'Gen Wristies' but it is not really genuine enough to qualify so I moved it here.

Ebel SS/18KYG 'Sport Classic'...  

833589636_IMG_0608(2).thumb.JPG.f5c5418c82ee71755d3564061a55be46.JPG

Specs...came with a worn/short metal bracelet screwed to the case and I cut the metal web between the lugs away, drilled spring bar holes, and mounted a strap.  It needed a crown and all I had was a Cartier 'blue cabochon' crown and since Ebel made many Cartier watches back then, they used same case tube so a Cartier crown fits.  High $$ Ebel/Cart movement was toast so I stuck an ETA 256.031/2 in it after removing the dial feet.  It has to be a very thin movement with the detent button under the dial so this movement was one of very few that would work because of the detent location and the watch being only 5.1mm thick.

To change the batt...remove the 5 gold screws, bezel, and crystal.  Remove the hands and pull the dial off with Rodico.  Push the detent button and remove the stem/crown, drop the movement out and r/r the (315) batt, and put it all back together.  This project was started in 2007, put away, and finished in 2013. 

 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up