e30m3 Posted May 8, 2018 Report Share Posted May 8, 2018 ...on first open, with very little force. Didn’t even get the plastic off. Any fixes that will withstand use? How’s the real one done? Link to comment Share on other sites More sharing options...
richard lawton Posted May 8, 2018 Report Share Posted May 8, 2018 Hi, Had the same problem, just clean the surfaces and carefully use epoxy glue (Two Part Mix type) worked OK for me, no issues. Richard Link to comment Share on other sites More sharing options...
alligoat Posted May 8, 2018 Report Share Posted May 8, 2018 Use clear epoxy and give it time to cure- like 24 hours. Link to comment Share on other sites More sharing options...
capice Posted May 9, 2018 Report Share Posted May 9, 2018 20 hours ago, alligoat said: Use clear epoxy and give it time to cure- like 24 hours. +1...maybe sand the coronoet en the spot where it used to be to get a better adhesive power Link to comment Share on other sites More sharing options...
Dizzy Posted May 11, 2018 Report Share Posted May 11, 2018 Yep as stated above. Clean and scuff both surfaces and clean with rubbing alcohol. Use a good clear two-part epoxy and not any of that quick dry stuff. You won’t need much. Like one drop. Attach the crown back on there and clamp it lightly or put weight on it and let it dry for 24 hours. It will never come off again. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now