FlipLockBuckle Posted January 29, 2007 Report Share Posted January 29, 2007 Hello, I was wondering if something like "rolex movement" replicas exist? I mean it should be not that much of a problem to take apart a 3035 gen movement, and copy all the parts. Do you know if such thing exists? And do you know what i would need to have in order to start such a project myself...except the movement itself? Thank you very much for your help? Danny Link to comment Share on other sites More sharing options...
Pugwash Posted January 29, 2007 Report Share Posted January 29, 2007 Do you know if such thing exists? And do you know what i would need to have in order to start such a project myself...except the movement itself? You'd need a precision factory to make a perfect replica of a Rolex movement. No-one does it because it's hard. Like invest-in-a-factory hard. Link to comment Share on other sites More sharing options...
archibald Posted January 29, 2007 Report Share Posted January 29, 2007 Hello, I was wondering if something like "rolex movement" replicas exist? I mean it should be not that much of a problem to take apart a 3035 gen movement, and copy all the parts. Do you know if such thing exists? And do you know what i would need to have in order to start such a project myself...except the movement itself? Thank you very much for your help? Danny A couple of years ago, you'd have been laughed off the board if you asked when the chinese were going to copy the 7750, 2892, and 6947. The 3035, like the el primero, is a slightly different animal, but I'm not going to be one of the people in thread who are going to tell you, "No way, never going to happen." Judging from their products, I see seagull and other chinese factories improving their technoloigy and capabilities at an amazing rate... If you're asking if you can build a 3035 from parts you scrape up piecemiel, the asnweer is yes if you know how to build a watch, but I bet at the end you'll wish you'd just gone and bought a gen rolex because it's would have been cheaper... Link to comment Share on other sites More sharing options...
Pugwash Posted January 29, 2007 Report Share Posted January 29, 2007 If you're asking if you can build a 3035 from parts you scrape up piecemiel, the asnweer is yes if you know how to build a watch, but I bet at the end you'll wish you'd just gone and bought a gen rolex because it's would have been cheaper... You forgot to mention you also need to do it in a country less serious about trademark infringement than the US, anywhere in Europe, Australia, etc. Link to comment Share on other sites More sharing options...
FlipLockBuckle Posted January 29, 2007 Author Report Share Posted January 29, 2007 Hey friends, I called a friend of mine, and he told me that it's possible without any problems. All that would be needed for that is all parts of the movement in a CAD document. The machine would simply do the rest. Now the big question...how the hell can i get the movement parts into a CAD file? Thanx Link to comment Share on other sites More sharing options...
FlipLockBuckle Posted January 29, 2007 Author Report Share Posted January 29, 2007 Alright guys, I found a 3D scanner for WinCNC which is able to scan 3d objects and reproduce them afterwards. PRoblem is...its accuracy is +-0,05mm, do you think its acceptable for a movement? Link to comment Share on other sites More sharing options...
Pugwash Posted January 29, 2007 Report Share Posted January 29, 2007 I called a friend of mine, and he told me that it's possible without any problems. All that would be needed for that is all parts of the movement in a CAD document. The machine would simply do the rest. Now the big question...how the hell can i get the movement parts into a CAD file? Does your friend make many watch movements? What he's talking about is CNC manufacturing, and he's not taking into account springs, rubies, several different materials, etc., let alone the sheer scale. These are tiny, tiny precision parts. Yes, in theory it's dead easy, just like swimming the English channel: Just point yourself at France and swim. The reality is a lot different, though. Link to comment Share on other sites More sharing options...
jfreeman420 Posted January 29, 2007 Report Share Posted January 29, 2007 Yes CAD would be needed along with a water jet metal cutter which is only ab out $1,000,000. You can also use a hockey puck and a vice along with tin snips. LOL You forgot to mention you also need to do it in a country less serious about trademark infringement than the US, anywhere in Europe, Australia, etc. Copyright law wouldn't be an issue if you just copied the movement without all the logos. Nothing illeagal about copying a non trademarked part. I would be happy with a non logo 3135 copy movement to make a decent day date and fit a genuine dial perfectly. Other than that there is really no reason to copy this movement. The ETA's work just as well and unless you are trying to rip someone off, what is the point of opening the watch? Link to comment Share on other sites More sharing options...
rag9fx Posted January 29, 2007 Report Share Posted January 29, 2007 Hahaha - the hockey puck and vice gag will go around and come around - awesome. The new Jetmid! CNC is nice and all, but .05 won't be enough. Also - Monometallic springs in correct and i mean 1000000% correct dimension, microstella screws etc - how should that be done with a CNC or so... The Asians will do it - sooner or later. Probably. But what probably also is true - where there is no need there won't be improvement. But then again, why the hell did they engrave some ETA's in Rolex style and cut the rotor? It's invisible anyway... Improvement - for what? So those movements do exist !?... man for a moment i thought i was having halusionations... i liked those dressed up etas... a lot nicer looking then the stock etas with the rolex plate on the rotor .... anyone have any pictures of one ? Link to comment Share on other sites More sharing options...
FlipLockBuckle Posted January 29, 2007 Author Report Share Posted January 29, 2007 (edited) i see, CNC is not the best way to start building high percision parts for movements.... ....but what about cases. Do you think it would be possible to reproduce a gen case with perfect CGs using CNC? cheers Edited January 29, 2007 by FlipLockBuckle Link to comment Share on other sites More sharing options...
stac Posted January 29, 2007 Report Share Posted January 29, 2007 ...gotta be the fumes Link to comment Share on other sites More sharing options...
Logan Posted January 29, 2007 Report Share Posted January 29, 2007 I can't aee any real difficulty in doing it. After all the people who would do so are the same people who make all the movements we currently use includung the 7750 copies and the new ETA copies. So no factories need to be built.. they already have them and are pretty efficient at copying movements. The Rolex 3xxx series is actually very simple and is designed for ease of production and servicing. The reason it hadn't happened is far more likely to be economic, even if you do have the factory it would still cost a fair bit or R and D time to get right and whilst it would sell like hot cakes here, the average replice buyer probably couldn't care less. My personal view though is that its only a matter of time until it happens. With ETA movement getting scarce that could well be the motivation. Link to comment Share on other sites More sharing options...
poopypants Posted January 29, 2007 Report Share Posted January 29, 2007 Hmmm? Ok i'll chime in... Why not let the manufacturers get the case and other parts down first, before jumping into the pit of "movements"?!?! Plus, the only reason that this would be beneficial, is if they did a true 1:1 case... (which these days seems to be purely brilliant marketing) that way, the stem would be in the "correct" location, hence the NEED for a genuine-spec case for 3035/3135 movements... Believe me, It would be a dream come true for many... However, lets come back to earth, and realize that after all these years incorrectly rep'ing a rlx, you really think they would get it right on the inside? - puff, puff, give! PP Link to comment Share on other sites More sharing options...
Pugwash Posted January 29, 2007 Report Share Posted January 29, 2007 I can't aee any real difficulty in doing it. Remember, this guy was asking if he could do it himself ... Link to comment Share on other sites More sharing options...
docblackrock Posted January 29, 2007 Report Share Posted January 29, 2007 Hey friends, I called a friend of mine, and he told me that it's possible without any problems. All that would be needed for that is all parts of the movement in a CAD document. The machine would simply do the rest. Now the big question...how the hell can i get the movement parts into a CAD file? Thanx Link to comment Share on other sites More sharing options...
Sir-Lancelot Posted January 30, 2007 Report Share Posted January 30, 2007 Link to comment Share on other sites More sharing options...
ubiquitous Posted January 30, 2007 Report Share Posted January 30, 2007 I called a friend of mine, and he told me that it's possible without any problems. All that would be needed for that is all parts of the movement in a CAD document. The machine would simply do the rest. Now the big question...how the hell can i get the movement parts into a CAD file? Perhaps you might ask your friend if he can CNC you some proper tools to work on your watches first... Link to comment Share on other sites More sharing options...
vmena Posted January 30, 2007 Report Share Posted January 30, 2007 Then I'm still searching for a proper movement ring to hold tight y ETA 2824 to my genuine datejust case anyone has one left? Link to comment Share on other sites More sharing options...
Craytonic Posted January 30, 2007 Report Share Posted January 30, 2007 Yes that movement ring would be very nice to have! Link to comment Share on other sites More sharing options...
vmena Posted January 30, 2007 Report Share Posted January 30, 2007 Yes that movement ring would be very nice to have! One member of this forum driven me to this link : julesborel They sell "enlargement rings" for ETA 2834. This guy used it for a datejust case and had to trim it a bit but result was ok. I'm going to order but international orders must be of a minimum of 50 USD + shipping. Before to do it I'll try in some big watchmaker malls in town. If no success, I'll order three of these ones. PS: thanks stilty for your help! Link to comment Share on other sites More sharing options...
madonna Posted January 30, 2007 Report Share Posted January 30, 2007 @vmena. You are located in Europa I think ? Maybe we could do a "shared order" from JulesBorel ? You get the pack from USA, and just forward some of them to me I need at least 2-3 of these myself. ( Any idea if the "enlargement ring" could work also for a 2892-2/A2 movement, have several good swiss 2892 now and prefere it over the 2824/36) Link to comment Share on other sites More sharing options...
r11co Posted January 30, 2007 Report Share Posted January 30, 2007 Is this thread someone's idea of humour?! Link to comment Share on other sites More sharing options...
marrickvilleboy Posted January 30, 2007 Report Share Posted January 30, 2007 once they start copying movements.....watches on ebay will never be the same - i mean its tough already....but once they start making rep rolex movements.....who will ever know.... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now