Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Trouble with Ziggy Lume


Recommended Posts

As we have all discussed many times, my idea of a wonderful vintage Rollie is a bit different than those who want to make them look old - I want mine to look like they did brand new, including lume that works. Therefore, I sent a bunch of watches off to Ziggy for his "ultimate" lume job, and had him install new gen crowns/tubes while he was about it.

I'm a little anal about things, and having watches I really like that are useles at night annoys me - especially since I spend as much free time as possible running a powerboat at night, and there are no lights to read a watch by as you cruise the intercoastal waterway, or skate the waves thirty miles offshore in the middle of the night. It has been with much anticipation that I have been waiting to get my watches back, and when I came home last night, I found a package from Ziggy -- they had arrived.

I had my hands full, as I had to get my boat ready to take out . . . it was Friday night, the weather was perfect, winds were minimal . . . anyway, I had a lot to do. I left my watch I was wearing one my dresser, and tossed the package from Ziggy in the truck.

Once i got my boat launched, and tied off dockside, I finally had time to open my package. It was getting dark, and I knew I was going to be impressed -- nothing to do between me and casting off but select which of my newly arrived glowing torches that I was going to wear, right?

Wrong.

I opened the package and none of them was a torch - Hell, they weren't much different than they were when I had sent them.

Oh well, lesson learned -- two lessons actually, the second being to experiment one watch at a time rather than spend a lot of money to be unimpressed.

Still, the night was fabulous, so I put on a nylon windbreaker and took off to go cruising. Speaking of lights and glow, you ought to see the lights of the big hotels as you run down the coast at 60+ mph on a really dark night -- wind blowing tears from the corners of your eyes, knifing thru swells, thrumming of motors . . . it would be easy not to go home til the gas run out. In fact, I generally don't and for what a couple of hundred gallons of gas costs these days, well that's another reason why the wifey doesn't mind if I sit home at night playing with watches.

When I finally did turn back, it was dark - blacker than a coal miner's ass crack, if ya know what I mean, but it was late enough that the damn Corinthians (a semi derogatory term for people who don't know [censored] about boats) had all gone home, which is a safety issue in more ways than one. Just try running the markers in the dark (you know, those telephone poles sticking up out of the water with unlit signs on them) and having some twit shine a spotlight in your face -- I kid you not, I have seen these freakin tourists try to use docking lights as headlights.

Anyway, they are all gone within a few hours of total darkness. Yankee tourists are only on the water of they got last and didn't know how to get back on time.

So there I was, blasting down the Intracoastal dodging the markers as only a smuggler (or MEO (Marine Enforcement Officer) is supposed to know how to do, when I decide to see what time it is. The way you do that on a boat at night is important, because you don't want to screw up your night vision and I have had plenty of practice with shitty lume watches. You take your mag light, put it against the watch crystal, turn it on for a few seconds, and then turn it off and read your watch. Evenb dead lume will glow perfectly well enough to see in total darkness for long enough to read it.

I looked at the watch, and couldn't see [censored]. Literally

There I was at 60+ MPH, blasting thru the dark with telephone poles sticking up at random intervals, when my Ziggy watch saw its first light -- about a zillion candlepower from a mag lite a few millimeters away. That watch, that had been in a perfectly dark mailer for almost a week, sucked that up like a dying man in the desert tossed into a lake.

It was like I had a damn KC Daylighter on my wrist. I looked up and couldn't see [censored] in any direction except the watch face with 3:05 that seemed to be permanently branded into my corneas.

Can you imagine running a high powered boat in the dark and having someone pull a bag over your head . . . it wasn't pretty. Every damn spotlight happy yankee at the yachtclub combined couldn't have blinded me so effectively. I shut down the throttles as fast as I could, but . . .

post-223-1173034961_thumb.jpg

post-223-1173034970_thumb.jpg

When I finally could see well enough to stand back up, I realized the bad news that I had hit something in the dark that knocked me flat on my ass. The good news was that my ass was not wet . . . evidently, the boat wasn't sunk.

She and I were pretty busted up, but she got me home without swimming . . . any landing you walk away from I guess.

So, that's why I'm gonna have to sue Ziggy, once he gets done doing the rest of my watches.

Good thing for Ziggy I have so many!

BTW -- if you have rep Rollies, and don't do anything else, try having a gen crown/tube installed. That has got to be the best mod you'll ever pay for, the difference is . . . I almost said, "night and day." That's the lume job - the crown and tube job is just excellent.

Bill

Link to comment
Share on other sites

Ziggy-

Actually I think he is extremely happy. It turns out that the minute there was any light from lights far away on the water his watches lit up. What he forgot to mention is that when he pulled the watches out of the package they were dark because it was dark out and so the watches hadn't seen the light of day or any other light for that matter for a week. Either that or he does think they suck. ;)

TJ-

If I am reading your post right you neglected to mention that the reason you were initially disappointed when you pulled them out in the dark was that you forgot that it takes light to make light. :lol: Not because it was a crappy lume job. :lol: Do I have this right?

Link to comment
Share on other sites

Ziggy-

Actually I think he is extremely happy. It turns out that the minute there was any light from lights far away on the water his watches lit up. What he forgot to mention is that when he pulled the watches out of the package they were dark because it was dark out and so the watches hadn't seen the light of day or any other light for that matter for a week. Either that or he does think they suck. ;)

TJ-

If I am reading your post right you neglected to mention that the reason you were initially disappointed when you pulled them out in the dark was that you forgot that it takes light to make light. :lol: Not because it was a crappy lume job. :lol: Do I have this right?

In the future, I shall take advantage of the bold, underline and italic functions!

LOLLLLLLL

"There I was at 60+ MPH, blasting thru the dark with telephone poles sticking up at random intervals, when my Ziggy watch saw its first light -- about a zillion candlepower from a mag lite a few millimeters away. That watch, that had been in a perfectly dark mailer for almost a week, sucked that up like a dying man in the desert tossed into a lake."

What am I gonna do with you guys!

Bill

Link to comment
Share on other sites

The thing I like best is, in daylight the watches look exactly like they did when I sent them.

I'm sure the puffy lume, or vintage colored lume, is great stuff, but it doesn't do it for me. I wanted my watches to look just like they came from MBW, but glow like brand new. You cannot believe the way these things glow.

I'm going to Jacksonville for a few days tomorrow; I'll get another batch of watches out at the end of the week.

Lord how I love a crown that feels like the real thing!

Bill

Link to comment
Share on other sites

I kind of thought the same thing, but then I read it again...maybe my engrish to french transelator is not working today??

Je crois que tu va recevoir tous ses montres pour des relumages. :D

(I think you're going to get all his watches in for reluming)

Link to comment
Share on other sites

It has been with much anticipation that I have been waiting to get my watches back, and when I came home last night, I found a package from Ziggy -- they had arrived.

I finally had time to open my package. It was getting dark, and I knew I was going to be impressed --

Wrong.

I opened the package and none of them was a torch - Hell, they weren't much different than they were when I had sent them.

Oh well, lesson learned --

I looked at the watch, and couldn't see shit. Literally

Bill

That was as far as I got. :lol: Glad to hear you are happy though. :thumbsupsmileyanim:

Link to comment
Share on other sites

Great post, Bill! Excluding the boat incident (very sorry about that), it was one entertaining read. :thumbsupsmileyanim:

The OEM cown/tube addition is a pretty amazing improvement. All of the sudden, the watch doesn't feel so much like a rep! I'm with you on the aging of these watches....I like them to look on the new side as well. Heck, I have a 52 year old watch that does not look much different from the day it left the factory & others in the 20-40 age group with very little patina on the T-dials.

Glad you are enjoying the new Zig torches! :D

Link to comment
Share on other sites

Good stuff, Bill. And yes indeed- Ziggy's lume work can indeed cause those torch lit indicies and hands to burn into one's retinas :lol: Sunglasses are recommended when checking the time :)

As for the crown/tube... That is a MUST do on any Rolex watch. If anything, from a purely functional standpoint. The aesthetics and feel are just a nice by-product...

I enjoyed the read... Hope your boat's okay after the collision!

Best,

R

Link to comment
Share on other sites

What a great story, Bill.

I feel as if I was out on the boat with you.

I'd give anything to be able to go out on a boat at night like that, experience of a lifetime.

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up