Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Old faithful 1665


dieselpower

Recommended Posts

As there is a lot of talk at the moment about 1665's I thought I would share with you my experiences with a basic (non-MBW) 1665 ETA that I have had for about 5 years.

I do alot of building work and therefore did not want to wear a 'work watch' that was of great value so I opted for a basic 1665 (the type with an adapted sub case). Well I have abused this thing in all manner of ways, it has been immersed in plaster, bashed with hammers, scraped on walls, dropped etc etc. I found that the weak point was the springbars as they are so thin the watch comes away from the strap (NATO) when bashed so I had my step father drill the lugs for 2mm springbars. This done the watch is now solid as a rock, I hasten to add it has always been waterproof (at least good enough to snorkel with anyway). The movement never misses a beat and keeps excellent time. Unfortunately a slight error crept in. I was holidaying recently in Sardinia and I took 'old faithful' with me. A few days into the hols I confidently leapt into the pool for a swim. I wasn't in for long as the pool was not heated and after I got out I noticed - shock horror - that old faithful had let in a little water! Salt water to boot!! I also noticed that the glass of the watch was cracked in about 6 different places, I am talking hair line cracks that at first were not very noticeable. I was thrown into a deep depression as the movement had stopped working also.

I couldn't believe it, this watch had been so good to me and I abused it so badly that the final drenching was just too much for the poor soul. I was bored and heartbroken by the pool so decided to persevere with the piece, I felt a little coaxing was the least I could do. I therefore opened the crown and placed the watch face down so gravity might draw the water to the glass rather than the dial/movement. After an hour or so the glass was covered in droplets of water - some quite large! I then manually wound the watch and lo and behold it started again - a miracle! I have now been wearing this watch for two weeks in the hope that the heat from my wrist will evaporate the water inside and I am happy to report that it has nearly all gone, about three more days should do it. But now to the point of this thread, I feel I owe it to 'old faithful' to replace the glass. Does anyone know where to get just the glass? I am no longer in contact with the supplier of the watch as he sent me a few duds and I stopped using him. Also, I have never done any work on a watch and have no specialist tools so was wondering if replacing the glass was practical for a rank amateur. I have of course smashed the bezel off 'old faithful' a few times but have just snapped it back in place and carried on with my work - that is about the extent of my watch repairing skills!

Many thanks for taking the time to share my experiences and I hope that someone can help this piece receive the TLC it truly deserves.

Link to comment
Share on other sites

I had one similar moding experience with one my 5 years hold DRSD non MBW.

I always used on swimming pool and diving on all the see around the world.

Two mouths ago I get a lot of mods (just to get my experience):

holes fro gen springbars , GEN Crown and tube , gen Tropic , case reshape etc.

During the mods I broke the original glass, so I tested to fit one T19 ( the T39 was too high for that light non correct bezel).

Here some pictures:

dscn3527nu9.jpg

dscn3602ex5.jpg

dscn3526fe3.jpg

To get the T19 tropic, the problem was that the Gen tropic was bigger than the case seat.

So I had to glue it with epoxy, and to be safe of the work done, I get one waterproof testing.

The DRSD passed 2 ATM test without problem.

I used it on my 2007 holidays diving at the sea and swimming without problems.

Now I get one MBW and I'm modding it :D

Edited by rosnik
Link to comment
Share on other sites

Lonnie,

If I ever want to sell it! You must be joking :o , would a loving parent sell his children? Would a man sell his loyal dog? Old faithful and I go back a long way and he has not failed me yet, the least I can do is repay that loyalty with a little in return :D

I will send Tribal a PM and see what can be done. My God, its like facing vet bills for an old pet that you just can't face putting to sleep.

Link to comment
Share on other sites

Oh well it was worth a try ;)

Lonnie,

If I ever want to sell it! You must be joking :o , would a loving parent sell his children? Would a man sell his loyal dog? Old faithful and I go back a long way and he has not failed me yet, the least I can do is repay that loyalty with a little in return :D

I will send Tribal a PM and see what can be done. My God, its like facing vet bills for an old pet that you just can't face putting to sleep.

Link to comment
Share on other sites

Repaustria,

If you think that is a lot of water you should have seen it when I was in Sardinia! Believe me the thing was swimming. I could turn the watch over and move the water around the glass by shaking it left to right, in fact after day one I could not even read the time because the glass was so covered in water droplets the time was illegible! I have just looked at the old boy and the water is now nearly gone so I think I will just leave him alone and take some more photos when he is completely dry and see if I can get one of you experts to replace the glass. Otherwise I will just carry on wearing him and see how long he lasts.

This whole saga is reminding me of those old RLX adverts where somebody is digging in his garden and unearths a 40 year old watch and finds that it is still working - well all I can say is that it is a great testament to our far eastern friends that they can produce an item of such durability at a fraction of the cost of their European counterparts.

It's funny how we all become so obsessed with accuracy and closeness to the gen piece and yet this (relatively) cheap rep with all its flaws and shortcomings can command such a place in my watch loving heart that I would not part with it for all the reps in China. Excuse me I am welling up...........

Well, as always the saga continues.

Thanks for all your interest, Old faithful and i are really touched.

Link to comment
Share on other sites

i am concerned that the movement will be toast from the flooding of salt water when it first leaked... i wonder how long it would take to rust? :huh:

Usually water of any kind is bad, but salt water will kill is much faster...

Lonnie

Link to comment
Share on other sites

:blink:

You and your crazy vintage gens!!You've always got a new pic for us. i assume its the UV light that fades it. Do you ever wear your DRSD outside? Toss it under a UV light for a bit and see what happens :crazy:

Would it be better to maybe lightly 'flush' the watch out with clean water then let it dry again??... you know.. to get any salt water out of the case and movement.

Lonnie

I wish mine would turn pink... 33 years and still waiting :tu:

drsd4.jpg

Link to comment
Share on other sites

Pug,

Damn! You noticed this thread and my photos. I actually took the pictures with my wifes camera which was lurking around when I was going to use my phone so that explains the amazing quality helped in no small part by my Baileyesque skills behind the lens :lol: .

Repaustria,

I have now retrieved the watch from its little bed of salt and I can confirm that all the water has vanished - you are a genius! Many thanks. I will post pics when I get a spare minute (and some daylight).

Lonnie,

I was thinking of 'flushing' the watch somehow but the idea of drenching the thing again fills me with dread. Does anybody have any experience of this? (The flushing I mean).

All,

Thanks again for your help but just to bug you all again I am still no closer to getting the glass replaced! Anyone got ant bright ideas?

Regards Dieselpower

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...
Please Sign In or Sign Up