bertieng Posted October 11, 2007 Report Posted October 11, 2007 Want to change the crystal of the MBK 5513. Any idea how to remove the bezel ring? Is it just a simple snap off by a razor/knife blade? Does it a pressing machine to put the bezel back on afterwards or again a snap on by hand will do the job? Thanks.
Tribal Posted October 11, 2007 Report Posted October 11, 2007 No No, on this one it's harder to get the retaining ring off.... Believe me.... Took a razorblade to pull it up But be carefull To get it back you need a press to do it right...
eunomians Posted October 12, 2007 Report Posted October 12, 2007 Wow, the MBW has a gasket? Weird. As se
Tribal Posted October 12, 2007 Report Posted October 12, 2007 (edited) Pfffffffff! We're not pansies like the boys from Austria, we just twist that ring off of there with our hands. Or our teeth, as necessary. Haha, i thought you drive with your car over it,to become the ring back over the case Edited October 12, 2007 by Tribal
bertieng Posted October 12, 2007 Author Report Posted October 12, 2007 No No, on this one it's harder to get the retaining ring off.... Believe me.... Took a razorblade to pull it up But be carefull To get it back you need a press to do it right... Dirk, Thanks for the info. Does this apply the same to the 1680? You know why I ask. Cheers.
offshore Posted October 12, 2007 Report Posted October 12, 2007 FWIW... Nanug in crystal remove posture!
offshore Posted October 12, 2007 Report Posted October 12, 2007 And when a crystal lift is the only option!
docblackrock Posted October 12, 2007 Report Posted October 12, 2007 Ach, you're all a big bunch of big girls blouses Stubborn retaining ring? bilateral placement of... Crystal press? inner bit of... cover with handle part of...(*optional*) 'strategically' hit with...
freddy333 Posted October 12, 2007 Report Posted October 12, 2007 B-o-l-l-o-c-k-s! Toss the bastard thing in here and get yourself one of these Yes, a bit Rube Goldberg in design, but it is self-winding (just keep whipping the man & he will keep running the watch) & does not attract too many flies, which, as we all know, is the mark of a truly great timepiece.
freddy333 Posted October 12, 2007 Report Posted October 12, 2007 Nah, you will scratch it with that thing. You need a woman's touch (and 3 (XXL) paper bags) Just sandwich the old watch in there somewhere & I am sure the bezel will end up getting pressed onto the shaft. Coming, Mother........
Jetsons Posted October 12, 2007 Report Posted October 12, 2007 Nah, you will scratch it with that thing. You need a woman's touch (and 3 paper bags)
bertieng Posted October 15, 2007 Author Report Posted October 15, 2007 Confirm it is necessary to trim down the retention ring in order to fit it onto the gen. T19. Pressing by force without rimming will just warp teh ring and it will never sit flush to the bottom of the case surface.
Highflyingclive Posted November 17, 2007 Report Posted November 17, 2007 This is Gran's technique. Note correct use of eye-loupe and movement holder...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now